Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your coleman furnace, look no further! Our comprehensive coleman furnace repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
CODE: Slow green flashing.
RESULT: Coleman furnace is operating normally.
FIX: N/A.
RESULT: Coleman furnace is operating normally.
FIX: N/A.
CODE: Slow amber flashing.
RESULT: Normal operation with a call for heat.
FIX: N/A.
RESULT: Normal operation with a call for heat.
FIX: N/A.
CODE: Steady on red.
RESULT: There's a control failure.
FIX: Check Control Unit.
RESULT: There's a control failure.
FIX: Check Control Unit.
CODE: Rapid red flashing.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.
CODE: Rapid amber flashing.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.
CODE: One red flash.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.
CODE: Two red flashes.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.
CODE: Three red flashes.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.
CODE: Four red flashes.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.
CODE: Five red flashes.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.
CODE: Six red flashes.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.
CODE: Seven red flashes.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.
CODE: Eight red flashes.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.
CODE: Nine red flashes.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.
CODE: Ten red flashes.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.
See What Our Customers Are Saying:
Apr 1, 2019
Installation was done quickly and professionally. The new furnace is quiet and provides even heat.
Mar 3, 2019
They removed and discarded old furnace. Installed new furnace. Installed air intake pipe, that had never been installed by builder, no charge. Replaced loose hose on floor with hard pipe and rerouted it to drain, no charge. Almost 33% cheaper then quote from Enercare, which was the company we dealt with and had insurance with for 8 years. No yearly fee for cleaning/insurance, saves 300 a year. Courteous, professional, fast, and friendly. My wife and I have been recommending them to everyone we know and meet, and will continue to do so. Thanks for everything, Twintech!!!
Mar 4, 2019
This company was great to deal with. Our furnace went down and they installed a new furnace the next day with a lot of professionalism!
Feb 22, 2019
Finally! An honest company with highly knowledgeable and informative staff. Had a furnace service and found multiply errors in our system from an amateur installer. Very fair price to correct problems and will definitely use again.
Feb 16, 2019
Had to replace the heating & a/c unit in a condo apartment dwelling. this company recommended by the property manager and president of the condo building. found their workmanship and attention to details very good and very thorough. were able to resolve small problems and situations and happy to feel the heat in my unit. it's pricey, but happy was done by a very professional service. thank you.
Feb 13, 2019
Fantastic team. Completed the job as per the specifications and in under 3 hours. Highly recommended Twintech.
Jan 30, 2019
During the summer, I previously hired TwinTech to replace my air conditioner when it failed. They did an excellent job so when I decided to proactively replace the furnace I contacted them. The furnace I had was 22 years old and showed signs of internal leakage. It still worked but rather than wait to have it fail in cold weather, I decided to purchase a higher efficiency model before it failed and take advantage of energy efficiency rebates. TwinTech offered very useful advice on the make and model of furnace to choose including high efficiency and variable speed motor. The price was reasonable, TwinTech arrived at the allotted time, installed the new furnace (including some re-routing of exhaust lines since the existing ones were too close to other vents), removed the old furnace, tested the installation and cleaned everything up. Overall, it was a good experience, they did a great job and the new furnace is working well.
Jan 26, 2019
Greg came over at 9:30pm to rescue my daughter and I from a horrible experience with Enercare that evening. He was professional. Kind. And got us what we needed quickly and at an afford price. I would 100% recommend calling on Greg and his team for any of your heating and cooling needs in the future!!
Jan 24, 2019
Installed a great hot water heater when our old one failed. When my furnace died during cold weather they showed up quickly and my house was warm before my wife got home. :)
Jan 14, 2019
I dont usually right reviews but when you receive service like this I felt it was a must. Honest and fair. I Have 4 children and on Xmas eve my furnace stopped working and a gentleman came out and got me up and running so at least we would have heat for the holidays. As promised he would replace my furnace early in the new year. The job was completed on time, great price for quality furnace and extremely clean and professional job. Would have never known anyone was in the house. Not a spec of dust or mess from lugging out an old rusty furnace. If you have any ac or heating concerns twintech is your only option. I was royally impressed with and Im sure you will be too.