| Twintech Heating and Cooling

24 / 7 Emergency Service Available. Call Us Now: 1.844.894.6832

Durham Region Air Conditioning Repair, Service and Installation

If you're looking for help fixing your luxaire air conditioner, look no further! Our comprehensive luxaire air conditioner repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.

CODE: E0.
RESULT: Indoor EEPROM (Electrically Erasable Programmable Read-Only Memory) error.

CODE: E1.
RESULT: Indoor and outdoor unit communication malfunction.

CODE: E3.
RESULT: Indoor fan speed malfunction.

CODE: E4.
RESULT: Indoor room temperature sensor error.

CODE: E5.
RESULT: Evaporator coil temperature sensor error.

CODE: EC.
RESULT: Refrigerant leak detection system malfunction.

CODE: EE.
RESULT: Water level alarm malfunction.

CODE: E8.
RESULT: Dual indoor unit (twin model only) communication malfunction.

CODE: E9.
RESULT: Other twin model malfunction.

CODE: F0.
RESULT: Overload protection.

CODE: F1.
RESULT: Outdoor temperature sensor error.

CODE: F2.
RESULT: Outdoor condenser pipe sensor error.

CODE: F3.
RESULT: Discharge air temperature sensor error.

CODE: F4.
RESULT: Outdoor EEPROM (Electrically Erasable Programmable Read-Only Memory) error.

CODE: F5.
RESULT: Outdoor fan speed (DC fan motor only) malfunction.

CODE: F6.
RESULT: T2b sensor error.

CODE: F7.
RESULT: Auto-lifting panel communication error.

CODE: F8.
RESULT: Auto-lifting panel malfunction.

CODE: F9.
RESULT: Auto-lifting panel is open.

CODE: P0.
RESULT: Inverter module IPM protection.

CODE: P1.
RESULT: High/Low voltage protection.

CODE: P2.
RESULT: Compressor top overheating protection.

CODE: P3.
RESULT: Outdoor low temperature protection.

CODE: P4.
RESULT: Compressor drive error.

CODE: P5.
RESULT: Mode conflict.

CODE: P6.
RESULT: Compressor low-pressure protection.

CODE: P7.
RESULT: Outdoor IGBT sensor error.

Luxaire Central Controller Fault Codes.

CODE: H3.
RESULT: Outdoor adding malfunction (valid for host unit).

CODE: H2.
RESULT: Outdoor decreasing malfunction (valid for host unit).

CODE: H1.
RESULT: Net communication malfunction.

CODE: EF.
RESULT: Other malfunction.

CODE: E4-T4.
RESULT: Temp. Sensor malfunction.

CODE: E3-T3.
RESULT: Temp. Sensor malfunction.

CODE: E2.
RESULT: Sensor malfunction.

CODE: E1-E0.
RESULT: Communication malfunction Phase sequence or lack of phase.

CODE: PF.
RESULT: Other Protection.

CODE: PE.
RESULT: Oil Balance.

CODE: PD.
RESULT: Oil Return.

CODE: PA.
RESULT: Defrost Protection.

CODE: P8.
RESULT: Compressor Current 3rd Protection.

CODE: P7.
RESULT: Compressor Current 2nd Protection.

CODE: P5.
RESULT: Condenser High Temp. Protection.

CODE: P4.
RESULT: Discharge Pipe Temp. Protection.

CODE: P3.
RESULT: Compressor Current 1st Protection.

CODE: P2.
RESULT: Discharge Low- pressure Protection.

CODE: P1-P0.
RESULT: Discharge High- pressure Protection Compressor High Temp. Protection.

Malfunction Code of Outdoor unit.

CODE: E1.
RESULT: Phase sequence error.

CODE: E2.
RESULT: Communication malfunction between indoor/outdoor units.

CODE: E3.
RESULT: T3 temperature sensor malfunction.

CODE: E4.
RESULT: T4 temperature sensor malfunction.

CODE: E5.
RESULT: T5 temperature sensor malfunction.

CODE: E6.
RESULT: Water-level alarm malfunction.

Luxaire Central Air Conditioning Error Codes,

CODE: EF.
RESULT: Other malfunction PF Other Protection.

CODE: EE.
RESULT: Water level checking malfunction PE Reserve.

CODE: ED.
RESULT: Outdoor protection PD Reserve.

CODE: EC.
RESULT: Clear malfunction PC Reserve.

CODE: EB.
RESULT: Inverter Module Protection PB Reserve.

CODE: EA.
RESULT: Compressor Over-current (4 times) PA Reserve.

CODE: E9.
RESULT: Communication malfunction between PCB and Display board P9 Reserve.

CODE: E8.
RESULT: Fan motor checking out of control P8 Compressor Over-current.

CODE: E7.
RESULT: EEPROM malfunction P7 Power Lack/Over Volt Protection.

CODE: E6.
RESULT: Over-zero checking malfunction P6 Discharge Low-pressure Protection.

CODE: E5.
RESULT: T3 sensor malfunction P5 Discharge High-pressure Protection.

CODE: E4.
RESULT: T2B sensor malfunction P4 Discharge Pipe Temp. Protection.

CODE: E3.
RESULT: T2A sensor malfunction P3 Compressor Temp. Protection.

CODE: E2.
RESULT: T1 sensor malfunction P2 Condenser High Temp. Protection.

CODE: E1.
RESULT: Communication malfunction P1 Anti-cooling or Defrost Protection.

CODE: E0.
RESULT: Phase sequence or lack of phase P0 Evaporator Temp. Protection.

CODE: 03#.
RESULT: CCM/PC(gateway) Communication Malfunction.

CODE: 02#.
RESULT: CCM/Function Module Communication Malfunction.

CODE: 01#.
RESULT: CCM/NIM Communication Malfunction.

CODE: 00#.
RESULT: CCM/PCB Communication Malfunction.

Luxaire Wall Mounted Type Ac Error Codes.

CODE: E7.
RESULT: Communication fault between indoor and outdoor units.

CODE: E1.
RESULT: Room temperature sensor failure.

CODE: E4.
RESULT: Indoor EEPROM error.

CODE: E14.
RESULT: Indoor fan motor malfunction.

CODE: F12.
RESULT: Outdoor EEPROM error.

CODE: F1.
RESULT: The protection of IPM.

CODE: F22.
RESULT: Overcurrent protection of AC electricity for the outdoor model.

CODE: F3.
RESULT: Communication fault between the IPM and outdoor PCB.

CODE: F19.
RESULT: Power voltage is too high or low.

CODE: F4.
RESULT: Overheat protection for Discharge temperature.

CODE: F8.
RESULT: Outdoor DC fan motor fault.

CODE: F21.
RESULT: Defrost temperature sensor failure.

CODE: F7.
RESULT: Suction temperature sensor failure.

CODE: F6.
RESULT: Ambient temperature sensor failure.

CODE: F25.
RESULT: Discharge temperature sensor failure.

CODE: F11.
RESULT: deviate from the normal for the compressor.

CODE: F28.
RESULT: Loop of the station detect error.

CODE: F2.
RESULT: Overcurrent of the compressor.

CODE: F23.
RESULT: Overcurrent protection for single-phase of the compressor.

See What Our Customers Are Saying:

Aug 20, 2022

by Lousan, Ajax on Twintech Heating and Cooling

New Furnace

From quote, to installation, to follow up, Twintech provided excellent service. I would highly recommended their services.

Aug 19, 2022

by John, Pickering on Twintech Heating and Cooling

Furnace And Air Conditioner

I had a really great experience with these guys. The salesman Bob was clearly very knowledgeable about everything to do with heating and cooling a home, spent a lot of time with us going over the details of the job, never rushed us and came back after the install to make sure we were happy. The installation crew was excellent, they covered the floors all the way from outside down to the basement furnace room, kept the place clean, got the work done on time and were very friendly. Ive got 15 years in the contracting/ construction industry and these guys are one of the most professional companys Ive dealt with. Great company!

Aug 18, 2022

by Debra Robertson on Twintech Heating and Cooling

Furnace, Air Conditioner Both Were Amana

Had great service and clean-up was good. Was happy with my salesman. They were very friendly and helpful. I needed a new furnace as our was over 20 years old. The furnace and air-conditioner work great and they are very quiet. I am very pleased with the service and product I received.

Aug 17, 2022

by Private User on Twintech Heating and Cooling

Air Conditioner Replacement

Met with Dave for the sales process and he was great about explaining and going over everything to us. The install happened very quickly and the team were super professional and friendly. We are very happy with this company and their services and we definitely recommend them to others. Thankful my sister recommended them to me!

Aug 16, 2022

by Private User on Twintech Heating and Cooling

Quick Quality Service

Reviews for Twintech were good, and they did not disappoint. After an initial visit to discuss the suitable AC unit for replacement, an installation date was available in just a couple of days, and everything was installed without a hitch. Highly recommended

Aug 16, 2022

by Private User on Twintech Heating and Cooling

New Furnace And A/C Installation

Very pleased with the installation of our new furnace and A/C unit. From quotation stage to the completion of the job Twintech was very professional.
Thank you for a job well done.

Aug 15, 2022

by Darren, Pickering on Twintech Heating and Cooling

Quick Water Heater Replacement

My old water heater quit on me. I called TwinTech. In less than 4 days, I had my new water heater installed and the old one taken away. The whole process was quick, easy, pleasant, and well done. This is the third time I've dealt with TwinTech and I've been satisfied each time.

Aug 14, 2022

by Private User on Twintech Heating and Cooling

Air Conditioner Replacement

I had them replace my furnace last year. When it came time for the air conditioner this year, I did not hesitate to call Twintech again. I will also have them perform regular maintenance on them.

Aug 13, 2022

by Robert, Ajax on Twintech Heating and Cooling

HVAC Replacement

We required a new HVAC replacement after running the old
system for 18 years.
Dave understood our requirements and gave us a quote that
covered all the necessary items.
Installation was fast and very tidy. Everything works as
it should. Our thanks to Greg, Mitch and others for their
excellent work. Recommend this family owned business to
anyone else, considering HVAC or other work.

Aug 12, 2022

by John Armstrong, Pickering on Twintech Heating and Cooling

New Furnace & A/C

I needed a new furnace and A/C to replace my 21 yr. old units, and went to the internet to view potential companies in May, I received 3 quotes,
and chose Twintech based on their salesman Dave who was very detailed and covered off everything on what Twintech was all about,
an extremely dedicated company with so many years of experience, and after reading the on line reviews I was sold on Twintech, who did not disappoint as the installation team were top notch with Greg leading,
I would highly recommend this company without any doubts, in my books they are first class all the way. Our new Amana furnace and A/C are working perfectly !