Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your tempstar air conditioner, look no further! Our comprehensive tempstar air conditioner repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
R-410A Split System Air Conditioner
CODE: On solid, no flash.
RESULT: Normal operation - with communicating Control.
RESULT: Normal operation - with communicating Control.
CODE: Off.
RESULT: Normal operation - No call for cooling with 2-wire connection or indoor unit not pow-Offered.
RESULT: Normal operation - No call for cooling with 2-wire connection or indoor unit not pow-Offered.
CODE: 1, pause.
RESULT: Normal operation.
RESULT: Normal operation.
CODE: 16.
RESULT: Communication with wall control lost. Check wiring to wall control, indoor and outdoor units.
RESULT: Communication with wall control lost. Check wiring to wall control, indoor and outdoor units.
CODE: 31.
RESULT: High pressure switch trip. Check refrigerant charge, outdoor fan operation and coils for airflow restrictions.
RESULT: High pressure switch trip. Check refrigerant charge, outdoor fan operation and coils for airflow restrictions.
CODE: 32.
RESULT: Low pressure switch trip. Check refrigerant charge and indoor air flow.
RESULT: Low pressure switch trip. Check refrigerant charge and indoor air flow.
CODE: 45.
RESULT: Outdoor unit control board has failed. Control board needs to be replaced.
RESULT: Outdoor unit control board has failed. Control board needs to be replaced.
CODE: 46.
RESULT: The control voltage is less than 15.5v for at least 4 seconds. Compressor and fan operation not allowed until control voltage is a minimum of 17.5v. Verify control volt-age.
RESULT: The control voltage is less than 15.5v for at least 4 seconds. Compressor and fan operation not allowed until control voltage is a minimum of 17.5v. Verify control volt-age.
CODE: 53.
RESULT: Outdoor air sensor not reading or out of range. Ohm out sensor and check wiring.
RESULT: Outdoor air sensor not reading or out of range. Ohm out sensor and check wiring.
CODE: 55.
RESULT: Coil sensor not reading or out of range. Ohm out sensor and check wiring.
RESULT: Coil sensor not reading or out of range. Ohm out sensor and check wiring.
CODE: 56.
RESULT: Improper relationship between coil sensor and outdoor air sensor. Ohm out sensors and check wiring.
RESULT: Improper relationship between coil sensor and outdoor air sensor. Ohm out sensors and check wiring.
CODE: 72.
RESULT: Compressor voltage sensed after start-up, then absent for 10 consecutive seconds while cooling demand exists. Possible causes are internal compressor overload trip orloss of high voltage to compressor without loss of control voltage. The control will continue fan operation and wait 15 minutes to attempt a restart. Fault will clear when restart is successful, or low voltage power is cycled.
RESULT: Compressor voltage sensed after start-up, then absent for 10 consecutive seconds while cooling demand exists. Possible causes are internal compressor overload trip orloss of high voltage to compressor without loss of control voltage. The control will continue fan operation and wait 15 minutes to attempt a restart. Fault will clear when restart is successful, or low voltage power is cycled.
CODE: 73.
RESULT: Compressor voltage sensed when no demand for compressor operation exists. Contactor may be stuck closed or there is a wiring error.
RESULT: Compressor voltage sensed when no demand for compressor operation exists. Contactor may be stuck closed or there is a wiring error.
CODE: 74.
RESULT: Compressor voltage not sensed when compressor should be starting. Disconnect may be open or contactor may be stuck open or there is a wiring error.
RESULT: Compressor voltage not sensed when compressor should be starting. Disconnect may be open or contactor may be stuck open or there is a wiring error.
CODE: 82.
RESULT: Thermal cutout occurs in three consecutive cycles. Unit operation locked out for 4 hours or until 24v power recycled.
RESULT: Thermal cutout occurs in three consecutive cycles. Unit operation locked out for 4 hours or until 24v power recycled.
CODE: 83.
RESULT: Low pressure switch trip has occurred during 3 consecutive cycles. Unit operation locked out for 4 hours or until 24v power recycled.
RESULT: Low pressure switch trip has occurred during 3 consecutive cycles. Unit operation locked out for 4 hours or until 24v power recycled.
CODE: 84.
RESULT: High pressure switch trip has occurred during 3 consecutive cycles. Unit operation locked out for 4 hours or until 24v power recycled.
RESULT: High pressure switch trip has occurred during 3 consecutive cycles. Unit operation locked out for 4 hours or until 24v power recycled.
See What Our Customers Are Saying:
Aug 20, 2022
From quote, to installation, to follow up, Twintech provided excellent service. I would highly recommended their services.
Aug 19, 2022
I had a really great experience with these guys. The salesman Bob was clearly very knowledgeable about everything to do with heating and cooling a home, spent a lot of time with us going over the details of the job, never rushed us and came back after the install to make sure we were happy. The installation crew was excellent, they covered the floors all the way from outside down to the basement furnace room, kept the place clean, got the work done on time and were very friendly. Ive got 15 years in the contracting/ construction industry and these guys are one of the most professional companys Ive dealt with. Great company!
Aug 18, 2022
Had great service and clean-up was good. Was happy with my salesman. They were very friendly and helpful. I needed a new furnace as our was over 20 years old. The furnace and air-conditioner work great and they are very quiet. I am very pleased with the service and product I received.
Aug 17, 2022
Met with Dave for the sales process and he was great about explaining and going over everything to us. The install happened very quickly and the team were super professional and friendly. We are very happy with this company and their services and we definitely recommend them to others. Thankful my sister recommended them to me!
Aug 16, 2022
Reviews for Twintech were good, and they did not disappoint. After an initial visit to discuss the suitable AC unit for replacement, an installation date was available in just a couple of days, and everything was installed without a hitch. Highly recommended
Aug 16, 2022
Very pleased with the installation of our new furnace and A/C unit. From quotation stage to the completion of the job Twintech was very professional.
Thank you for a job well done.
Aug 15, 2022
My old water heater quit on me. I called TwinTech. In less than 4 days, I had my new water heater installed and the old one taken away. The whole process was quick, easy, pleasant, and well done. This is the third time I've dealt with TwinTech and I've been satisfied each time.
Aug 14, 2022
I had them replace my furnace last year. When it came time for the air conditioner this year, I did not hesitate to call Twintech again. I will also have them perform regular maintenance on them.
Aug 13, 2022
We required a new HVAC replacement after running the old
system for 18 years.
Dave understood our requirements and gave us a quote that
covered all the necessary items.
Installation was fast and very tidy. Everything works as
it should. Our thanks to Greg, Mitch and others for their
excellent work. Recommend this family owned business to
anyone else, considering HVAC or other work.
Aug 12, 2022
I needed a new furnace and A/C to replace my 21 yr. old units, and went to the internet to view potential companies in May, I received 3 quotes,
and chose Twintech based on their salesman Dave who was very detailed and covered off everything on what Twintech was all about,
an extremely dedicated company with so many years of experience, and after reading the on line reviews I was sold on Twintech, who did not disappoint as the installation team were top notch with Greg leading,
I would highly recommend this company without any doubts, in my books they are first class all the way. Our new Amana furnace and A/C are working perfectly !