Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
What is the Difference Between Single-Stage, Two-Stage, and Modulating Furnaces?
Posted On: January 8, 2020
When you are looking around for a new furnace, you will come across three different types: single-stage, two-stage and modulating. You may probably ask, what are the differences between them, and which one is right for your home?
In this article, we will explain the differences between them and help you decide which furnace works best for you and your family.
Single-Stage Furnaces
Single-stage furnaces only have one setting, which is high heat. On a call for heat, they immediately start running at full capacity, no matter what the temperature is outside until the signal coming from the thermostat is turned off. These types of furnaces are best suited for budget-conscious consumers, so in the long run, the upfront cost savings are not realized.
Two-Stage Furnaces
A two-stage gas furnace has two settings, high fire and low fire, and here is how it works. Most of the time, on a typical heating cycle the furnace will start out running on low fire, consuming less gas and electricity, while at the same time providing heat and gaining inefficiency. After approximately 7- 10 minutes of operation, the furnace begins to operate very efficiently because it is fully warmed up. Then, it will jump up into high fire and finish out the heating cycle at full capacity. Control of the high and low burner timing are made by the installers, as part of a new furnace installation.
You could also control the 2 stage burner by using a 2 stage thermostat, the effect of either is similar. Two-stage furnaces are considered more energy-efficient than single-stage because they are not always running at a full heating capacity of the appliance and are often equipped with an ECM blower motor which will also save on your electricity costs.
Modulating Furnaces
Modulating gas furnaces are at the top end of the gas furnace spectrum and are considered to be the most energy-efficient of the three. But, at an added price over two-stage or single-stage furnaces. Heating from a modulating furnace ramps up in increments to maintain a consistent temperature and the ductwork is always warmed up so there is a little efficiency lost during the warming up process.
When buying a modulating furnace you will almost always need to invest in a new thermostat controller specifically designed for this type of furnace in order to get the most out of it. Always ask your salesman about this option, as it is often not mentioned (due to the added cost of the new thermostat). If you are planning to stay in your home for the long-term, a modulating gas furnace may be the right fit for you.
When you want to buy a new furnace, you should always consult your local HVAC experts before making a decision. A trained HVAC technician can come to your home, go over your situation with you and help you decide which furnace best suits your home.
When you are ready for a new furnace, contact the Twintech experts! Our technicians are experienced and knowledgeable in all types of furnaces and HVAC systems.
For more information about our services, visit our website or give us a call at 1-844-894-6832. Contact Twintech today!
[BACK]
See What Our Customers Are Saying:
May 8, 2020
The blower on our furnace stopped working leaving us with a cold house. Dave from TwinTech responded immediately to our HomeStars service request. From beginning to end Dave was nothing but helpful, friendly and professional, he did a great job of walking us through the quote and scope of work.
The replacement of the furnace went smoothly. The Guys did a great job, everyone was very friendly and polite. There were no hiccups, or unexpected costs. The only surprise was they left the work area cleaner than it was before they started.
Was a great experience with the whole TwinTech team. Its been a couple of months since the new furnace has been installed and its working great!
May 7, 2020
I heard about TwinTech when researching new furnaces at furnaceprices.ca. After contacting them about my broken down furnace, Dave came to my house the next day to assess my situation and requirements for a new furnace. He recommended one that had stainless steel heat exchangers which sold me since my previous furnace had issues with a rusted secondary heat exchanger that had to be replaced. Dave also set me up with an appointment with an energy audit company so that I could take advantage of a rebate to help improve the energy efficiency of my home and get some money back. A few days later, Greg, Grant, and Mitch came to install the new furnace and remove the old one. When delivering and removing the furnaces, they were very careful not to damage my floors and walls, and even laid out red carpeting to protect the floors. They were very friendly and professional. The installation was completed in the time they said it would take and they cleaned up their work areas. Within a week, Dave called to follow-up to see how everything was going. I have already recommended them to several friends and family members who may need new furnaces soon.
May 6, 2020
Twintech did a great job, from Dave the Sales Rep to the Office staff and The Professional Technicians who did the installation. They were professional, courteous, knowledgable and informative. From beginning to follow up we were completely satisfied with everything. Thanks Again. Sincerely The Laytons
May 5, 2020
Great product, great service, great follow-up. The Twintech Heating and Cooling arranged removal of my existing oil tank and they installed the new gas furnace Amana (made in USA). I am very happy with the final result and support I received throughout the process. My thanks go to the entire Twintech team for their professionalism, great communication and follow-up.
May 4, 2020
We've had Twintech provide us with work in the past, for an inground pool heater and required rough-in for a new gas stove. More recently they provided the same friendly, professional, timely and clean installation of our new furnace.
May 3, 2020
Reasonable price and the workmanship was prompt and timely and the employees were great to deal with.
May 2, 2020
The sales process was friendly, informative, and very consultative. They worked hard to earn our business by taking a careful look around our home to assess our needs, providing a lot of information about the product, and answering all our questions and finding the right solution for our home at a competitive price. They prepared us very well for what to expect on installation day, and the installation went very smoothly - no surprises, all very professional! They gave us a call after installation to ensure we were happy with the work. We're very happy that we chose to work with TwinTech to get our new furnace.
May 1, 2020
Twintech promptly responded to request for quotation. They were thorough and helpful in explaining options. The quote was very competitive. Installation of new furnace was very professionally completed. Excellent work.
Jan 17, 2020
When our old oil furnace finally broke down we decided it was time to finally convert to natural gas and finally install central air conditioning at the same time. Knowing it was going to be a significant investment for us, we wanted to make the right choice. Twintech came highly recommended by a friend and we were not disappointed. From the first contact with the salesperson, until the final touches on the installation, we were so pleased with their service. Everyone from the company was so friendly, efficient and a pleasure to deal with. Best of all, the cost was very competitive. We would certainly recommend Twintech to anyone requiring HVAC work in their home.
Jan 15, 2020
Mitch from Twintech came out for our annual furnace inspection. We found him to be friendly, conscientious & he left the work area clean. We were also very impressed with the thoroughness of the job he did. This is the 2nd job weve had Twintech do for us & have been very happy with the results for each. We highly recommend this company. Thank you, Mitch, Dave & Greg.
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,