Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your coleman furnace, look no further! Our comprehensive coleman furnace repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
CODE: Slow green flashing.
RESULT: Coleman furnace is operating normally.
FIX: N/A.
RESULT: Coleman furnace is operating normally.
FIX: N/A.
CODE: Slow amber flashing.
RESULT: Normal operation with a call for heat.
FIX: N/A.
RESULT: Normal operation with a call for heat.
FIX: N/A.
CODE: Steady on red.
RESULT: There's a control failure.
FIX: Check Control Unit.
RESULT: There's a control failure.
FIX: Check Control Unit.
CODE: Rapid red flashing.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.
CODE: Rapid amber flashing.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.
CODE: One red flash.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.
CODE: Two red flashes.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.
CODE: Three red flashes.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.
CODE: Four red flashes.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.
CODE: Five red flashes.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.
CODE: Six red flashes.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.
CODE: Seven red flashes.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.
CODE: Eight red flashes.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.
CODE: Nine red flashes.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.
CODE: Ten red flashes.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.
See What Our Customers Are Saying:
Sep 28, 2017
Work was performed in a clean and timely manner. The furnace and metal work was performed by the Twintech team (did not require separate contractor to do the metal work). Energy audit was arranged and promised rebates were received. The overall price was very competitive. We have recommended Twintech to several of our friends and family. Awesome job.
Sep 20, 2017
Grant and Greg installed a heating and AC system in our new Linwood post and beam home. Post and beam can be challenging structures for running ductwork and their high ceilings and open concept frequently frustrate efforts at balancing air flow and controlling temperatures. But these guys did it and did it right the first time. Even the building inspector was impressed with what he saw. More importantly, the boys brought a high degree of trust and integrity to the job. Something in short supply these days.
Sep 13, 2017
Very polite and professional. They removed my o
ld furnace and A/C and installed my new ones. They were efficient and thoroughly cleaned up when they were done! I would highly recommend them!
Sep 13, 2017
Pro from start to finish. They were able to fix my gas fireplace at very little cost as well.
Aug 8, 2017
Excellent installation very knowledgeable gentlemen! Would highly recommend them to all my friends for any hvac work !
Jul 23, 2017
I have used Twintech many times over the years. They always arrive quickly and get the issue fixed. The most recent incident was when my air conditioner broke last week I called Greg at 11:30am and he was at my home by 2:30pm he had the unit fixed by 3:30pm. Twintech are very reliable and honest and they are experts in the field. I have already recommended them to many of my friends. I would not use anyone but them for my heating and air conditioning issues.
Jul 17, 2017
I would highly recommend these guys, professional, fast and competitive pricing. I moved into this place with no working AC unit with a 8 month baby, he was able to come with in a week to fix even in the busy summer days. He really values his customers , I am already recommending to my neighbors.
Jul 2, 2017
Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!
Jun 29, 2017
Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.
Jun 28, 2017
Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.