Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your napoleon air conditioner, look no further! Our comprehensive napoleon air conditioner repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
PROBLEM: Unit will not operate,
RESULT: Power disconnected or loose connection.
FIX: Check power supply to unit. Check voltage at contactor.
RESULT: Power disconnected or loose connection.
FIX: Check power supply to unit. Check voltage at contactor.
PROBLEM: Unit will not operate,
RESULT: Blown fuse / breaker tripped.
FIX: Replace fuses/reset breaker.
RESULT: Blown fuse / breaker tripped.
FIX: Replace fuses/reset breaker.
PROBLEM: Unit will not operate,
RESULT: Thermostat out of calibration is set too high.
FIX: Reset.
RESULT: Thermostat out of calibration is set too high.
FIX: Reset.
PROBLEM: Unit will not operate,
RESULT: Contactor defective.
FIX: Check for 24VAC at contactor coil - replace if open.
RESULT: Contactor defective.
FIX: Check for 24VAC at contactor coil - replace if open.
PROBLEM: Unit will not operate,
RESULT: Transformer defective.
FIX: Check wiring - replace transformer.
RESULT: Transformer defective.
FIX: Check wiring - replace transformer.
PROBLEM: Unit will not operate,
RESULT: High pressure control open (if provided).
FIX: Reset - see high pressure connection.
RESULT: High pressure control open (if provided).
FIX: Reset - see high pressure connection.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Run or start capacitor defective.
FIX: Replace.
RESULT: Run or start capacitor defective.
FIX: Replace.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Start relay defective.
FIX: Replace.
RESULT: Start relay defective.
FIX: Replace.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Loose wire.
FIX: Check for correct voltage at compressor - check and tighten all connections.
RESULT: Loose wire.
FIX: Check for correct voltage at compressor - check and tighten all connections.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Compressor stuck, grounded or open motor winding, open internal overload.
FIX: Wait at least 2 hours for overload to reset; if still open, replace the compressor.
RESULT: Compressor stuck, grounded or open motor winding, open internal overload.
FIX: Wait at least 2 hours for overload to reset; if still open, replace the compressor.
PROBLEM: Too little cooling.
RESULT: Low voltage condition.
FIX: Add start kit components.
RESULT: Low voltage condition.
FIX: Add start kit components.
PROBLEM: Too little cooling.
RESULT: Improperly sized unit.
FIX: Recalculate load.
RESULT: Improperly sized unit.
FIX: Recalculate load.
PROBLEM: Too little cooling.
RESULT: Improper indoor airflow.
FIX: Check-should be approximately 400 CFM per ton.
RESULT: Improper indoor airflow.
FIX: Check-should be approximately 400 CFM per ton.
PROBLEM: Too little cooling.
RESULT: Incorrect refrigerant charge.
FIX: Charge per procedure in installation manual.
RESULT: Incorrect refrigerant charge.
FIX: Charge per procedure in installation manual.
PROBLEM: Too little cooling.
RESULT: Air, non-condensables or moisture in system.
FIX: Recover refrigerant.
RESULT: Air, non-condensables or moisture in system.
FIX: Recover refrigerant.
PROBLEM: Compressor operates in short cycles.
RESULT: Incorrect voltage.
FIX: At compressor terminals, voltage must be +/10% of nameplate marking when unit is operating.
RESULT: Incorrect voltage.
FIX: At compressor terminals, voltage must be +/10% of nameplate marking when unit is operating.
PROBLEM: Compressor operates in short cycles.
RESULT: Defective overload protector.
FIX: Replace - check for correct voltage.
RESULT: Defective overload protector.
FIX: Replace - check for correct voltage.
PROBLEM: Compressor operates in short cycles.
RESULT: Refrigerant undercharge.
FIX: Add refrigerant.
RESULT: Refrigerant undercharge.
FIX: Add refrigerant.
PROBLEM: High head pressure; Low suction pressure.
RESULT: Restriction in liquid line, expansion device or filter drier.
FIX: Remove or replace defective component.
RESULT: Restriction in liquid line, expansion device or filter drier.
FIX: Remove or replace defective component.
PROBLEM: High head pressure; Low suction pressure.
RESULT: Lack of sufficient indoor airflow.
FIX: Clean/check filters, registers, or evaporator coil that may cause a restriction.
RESULT: Lack of sufficient indoor airflow.
FIX: Clean/check filters, registers, or evaporator coil that may cause a restriction.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Dirty outdoor coil.
FIX: Clean coil.
RESULT: Dirty outdoor coil.
FIX: Clean coil.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Refrigerant overcharge.
FIX: Correct system charge.
RESULT: Refrigerant overcharge.
FIX: Correct system charge.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Outdoor fan not running.
FIX: Repair or replace.
RESULT: Outdoor fan not running.
FIX: Repair or replace.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
PROBLEM: Low head pressure; High suction pressure.
RESULT: Expansion device stuck in open position.
FIX: Replace expansion device.
RESULT: Expansion device stuck in open position.
FIX: Replace expansion device.
PROBLEM: Low head pressure; High suction pressure.
RESULT: Defective compressor valves.
FIX: Replace compressor.
RESULT: Defective compressor valves.
FIX: Replace compressor.
PROBLEM: Low suction pressure; Compressor cool. Ice on indoor coil.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
PROBLEM: Low suction pressure; Compressor cool. Ice on indoor coil.
RESULT: Operating below 65F (18C) outdoors.
FIX: Add low ambient kit.
RESULT: Operating below 65F (18C) outdoors.
FIX: Add low ambient kit.
PROBLEM: Low suction pressure; Compressor cool. Ice on indoor coil.
RESULT: Moisture in system.
FIX: Recover refrigerant - evacuate and recharge - replace filter drier.
RESULT: Moisture in system.
FIX: Recover refrigerant - evacuate and recharge - replace filter drier.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: Excessive load.
FIX: Recheck load calculation.
RESULT: Excessive load.
FIX: Recheck load calculation.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: Defective compressor.
FIX: Replace.
RESULT: Defective compressor.
FIX: Replace.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: TXV hunting.
FIX: Check TXV bulb clamp - check air distribution on coil - replace TXV.
RESULT: TXV hunting.
FIX: Check TXV bulb clamp - check air distribution on coil - replace TXV.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
PROBLEM: Pulsing noise at expansion device or liquid line.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
PROBLEM: Registers sweat.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
See What Our Customers Are Saying:
Sep 28, 2017
Work was performed in a clean and timely manner. The furnace and metal work was performed by the Twintech team (did not require separate contractor to do the metal work). Energy audit was arranged and promised rebates were received. The overall price was very competitive. We have recommended Twintech to several of our friends and family. Awesome job.
Sep 20, 2017
Grant and Greg installed a heating and AC system in our new Linwood post and beam home. Post and beam can be challenging structures for running ductwork and their high ceilings and open concept frequently frustrate efforts at balancing air flow and controlling temperatures. But these guys did it and did it right the first time. Even the building inspector was impressed with what he saw. More importantly, the boys brought a high degree of trust and integrity to the job. Something in short supply these days.
Sep 13, 2017
Very polite and professional. They removed my o
ld furnace and A/C and installed my new ones. They were efficient and thoroughly cleaned up when they were done! I would highly recommend them!
Sep 13, 2017
Pro from start to finish. They were able to fix my gas fireplace at very little cost as well.
Aug 8, 2017
Excellent installation very knowledgeable gentlemen! Would highly recommend them to all my friends for any hvac work !
Jul 23, 2017
I have used Twintech many times over the years. They always arrive quickly and get the issue fixed. The most recent incident was when my air conditioner broke last week I called Greg at 11:30am and he was at my home by 2:30pm he had the unit fixed by 3:30pm. Twintech are very reliable and honest and they are experts in the field. I have already recommended them to many of my friends. I would not use anyone but them for my heating and air conditioning issues.
Jul 17, 2017
I would highly recommend these guys, professional, fast and competitive pricing. I moved into this place with no working AC unit with a 8 month baby, he was able to come with in a week to fix even in the busy summer days. He really values his customers , I am already recommending to my neighbors.
Jul 2, 2017
Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!
Jun 29, 2017
Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.
Jun 28, 2017
Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.