Durham Region Air Conditioning Repair, Service and Installation
If you are an owner of Ruud furnace or operate it at your work, you may encounter with Ruud furnace error codes appearing in the operation process. The tables on the page describe the codes, flashes, blinks and other problem signals and let you understand what is going on with the equipment at a certain moment.
Ruud R801T Furnace Error Code
CODE: 0.
RESULT: Standby.
RESULT: Standby.
CODE: C.
RESULT: Compressor on (cooling or heat-pump heat).
RESULT: Compressor on (cooling or heat-pump heat).
CODE: H.
RESULT: Gas heat on.
RESULT: Gas heat on.
CODE: F.
RESULT: Continuous fan on.
RESULT: Continuous fan on.
CODE: 10.
RESULT: 1 hour lockout.
RESULT: 1 hour lockout.
CODE: 11.
RESULT: Failed ignition.
RESULT: Failed ignition.
CODE: 12.
RESULT: Low flame sense.
RESULT: Low flame sense.
CODE: 13.
RESULT: Flame lost.
RESULT: Flame lost.
CODE: 14.
RESULT: Unexpected flame.
RESULT: Unexpected flame.
CODE: 20.
RESULT: Twinning fault.
RESULT: Twinning fault.
CODE: 22.
RESULT: Main limit open.
RESULT: Main limit open.
CODE: 26.
RESULT: Line and neutral reversed.
RESULT: Line and neutral reversed.
CODE: 33.
RESULT: Mrlc (manual reset limit control) (aka roll-out) open.
RESULT: Mrlc (manual reset limit control) (aka roll-out) open.
CODE: 55.
RESULT: Pressure switch stuck closed when should be open.
RESULT: Pressure switch stuck closed when should be open.
CODE: 57.
RESULT: Press switch stuck open when should be closed.
RESULT: Press switch stuck open when should be closed.
CODE: 61.
RESULT: Blower fault-blower unable to run.
RESULT: Blower fault-blower unable to run.
CODE: 93.
RESULT: Internal control fault.
RESULT: Internal control fault.
Ruud U98V Furnace Error Code
FLAME LED: OFF.
RESULT: No flame is detected.
RESULT: No flame is detected.
FLAME LED: Rapid blink.
RESULT: Unexpected flame.
RESULT: Unexpected flame.
FLAME LED: Slow blink.
RESULT: Marginal flame sense.
RESULT: Marginal flame sense.
FLAME LED: Steady ON.
RESULT: Normal flame detected.
RESULT: Normal flame detected.
STATUS LED: Steady ON.
RESULT: Furnace.
RESULT: Furnace.
STATUS LED: 1 Blink.
RESULT: Ignition failure, 1 HR lockout.
FIX: Reboot system.
RESULT: Ignition failure, 1 HR lockout.
FIX: Reboot system.
STATUS LED: 2 Blinks.
RESULT: Pressure switch stuck open, switch will not close when inducer is on.
FIX: Try to manually close the switch, replace the switch, or check blowers and vents for air pressure.
RESULT: Pressure switch stuck open, switch will not close when inducer is on.
FIX: Try to manually close the switch, replace the switch, or check blowers and vents for air pressure.
STATUS LED: 3 Blinks.
RESULT: Limit switch open, main limit or roll out control
FIX: Check for a restricted air vent, loose blower wheel, a defective blower, or a dirty air filter.
RESULT: Limit switch open, main limit or roll out control
FIX: Check for a restricted air vent, loose blower wheel, a defective blower, or a dirty air filter.
STATUS LED: 4 Blinks.
RESULT: Pressure switch stuck closed, switch will not open.
FIX: Check for an obstruction in the pressure tubing.
RESULT: Pressure switch stuck closed, switch will not open.
FIX: Check for an obstruction in the pressure tubing.
STATUS LED: 5 Blinks.
RESULT: Not applicable.
RESULT: Not applicable.
STATUS LED: 6 Blinks.
RESULT: Line and neutral reversed.
FIX: Control board or the furnace's ground could be defective.
RESULT: Line and neutral reversed.
FIX: Control board or the furnace's ground could be defective.
POWER LED: OFF.
RESULT: No power (24 VAC) to control board.
RESULT: No power (24 VAC) to control board.
POWER LED: ON.
RESULT: Control is powered.
RESULT: Control is powered.
Ruud R802P Furnace Error Code
FLAME LED: OFF.
RESULT: No flame is detected.
RESULT: No flame is detected.
FLAME LED: Rapid Blink.
RESULT: Unexpected Flame.
RESULT: Unexpected Flame.
FLAME LED: Slow Blink.
RESULT: Marginal Flame Sense.
RESULT: Marginal Flame Sense.
FLAME LED: Steady ON.
RESULT: Normal Flame Detected.
RESULT: Normal Flame Detected.
STATUS LED: Steady ON.
RESULT: Normal Fault detected.
RESULT: Normal Fault detected.
STATUS LED: 1 Blink.
RESULT: Ignition failure, 1 HR lockout.
RESULT: Ignition failure, 1 HR lockout.
STATUS LED: 2 Blinks.
RESULT: Pressure switch stuck open switch will not close when inducer is on.
RESULT: Pressure switch stuck open switch will not close when inducer is on.
STATUS LED: 3 Blinks.
RESULT: Limit switch open main limit or roll-out control.
RESULT: Limit switch open main limit or roll-out control.
STATUS LED: 4 Blinks.
RESULT: Pressure switch stuck closed. Switch will not open.
RESULT: Pressure switch stuck closed. Switch will not open.
STATUS LED: 5 Blinks.
RESULT: Not applicable.
RESULT: Not applicable.
STATUS LED: 6 Blinks.
RESULT: Line and Neutral reversed.
RESULT: Line and Neutral reversed.
POWER LED: OFF.
RESULT: No power (24VAC) to control board.
RESULT: No power (24VAC) to control board.
POWER LED: ON.
RESULT: Control is powered.
RESULT: Control is powered.
Ruud R96P Furnace Error Code
GREEN LED: ON.
RESULT: Normal operation.
RESULT: Normal operation.
GREEN LED: 1 Flash.
RESULT: Ignition failure (4 trials).
RESULT: Ignition failure (4 trials).
GREEN LED: 2 Flashes.
RESULT: Pressure switch stuck open.
RESULT: Pressure switch stuck open.
GREEN LED: 3 Flashes.
RESULT: Limit switches open.
RESULT: Limit switches open.
GREEN LED: 4 Flashes.
RESULT: Pressure switch stuck closed.
RESULT: Pressure switch stuck closed.
GREEN LED: 5 Flashes.
RESULT: Twin fault.
RESULT: Twin fault.
GREEN LED: 6 Flashes.
RESULT: Brownout voltage.
RESULT: Brownout voltage.
GREEN LED: 7 Flashes.
RESULT: Hot and neutral reversed or no ground.
RESULT: Hot and neutral reversed or no ground.
GREEN LED: Continuous.
RESULT: Gas valve relay short.
RESULT: Gas valve relay short.
YELLOW LED: Rapid Blink.
RESULT: Flame out of sequence.
RESULT: Flame out of sequence.
YELLOW LED: Slow Blink.
RESULT: Low flame or no flame.
RESULT: Low flame or no flame.
YELLOW LED: ON.
RESULT: Flame present.
RESULT: Flame present.
See What Our Customers Are Saying:
Feb 1, 2021
I received three quotes before deciding to choose Twintech. Dave's prices was much more reasonable than the competitors. I most appreciated their honest recommendations. Others tried to oversell their products and services. Thank you Dave!
Feb 1, 2021
They had the best price and did a great job on the installation. Recommend them to anyone.
Feb 1, 2021
It was a amazing and professional high quality job
Friendly and very helpful representatives
Thank you for understanding my concern
And explain very well
Overall we pleased with your service
Tanks
May 15, 2020
My 19 year old furnace stopped working when the cold weather hit in November, and I was left without heat. I interviewed several companies and found TWINTECH HEATING and COOLING to be very knowledgeable, quick to respond to my inquiries and very competitively priced.
Dave provided all of the information and pricing ahead of time and set up the appointment for the installation. Greg and Mitch arrived on time to do the installation and worked quickly and efficiently to complete the job.
After the completion of the installation, Dave followed up to ensure that everything was working well and that I didn't have any concerns.
Overall, this was a low-stress and flawless experience from start to finish. I would highly recommend TWINTECH HEATING and COOLING to anyone that requires a new furnace.
May 14, 2020
Our 20 year old furnace broke down during the first cold weekend this past November and our usual HVAC company never returned our phone call. Their loss, missing out on a sale since we didn't want to spend much fixing an old furnace and our 40 year old air conditioner was also long overdue for replacement. We proceeded in obtaining three different quotes for furnace and air conditioner replacement, and proceeded with the one we received from Twintech.
Dave was friendly, knowledgable and accommodating to our schedule and provided with us with a price that fell in the middle of the three quotes that we had. We felt that the Amana furnace and air conditioner he quoted us on were the best products and value offered to us and felt most comfortable with the professionalism and reputation of Twintech.
Greg, Grant and Mitch were at our house for installation the day after we decided to proceed. The guys were friendly and informative, the job was completed efficiently and workmanship appears excellent. Our house is certainly much more comfortable with the new two-stage variable speed Amana furnace compared to the old clunker! And, we're looking forward to enjoying the new air conditioner once summer rolls around again. Thanks Twintech!
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
May 11, 2020
We couldnt have been more impressed with Twintech - from our first service call with Mitch who took the time to thoroughly diagnose the issue with our furnace, to Dave who proposed a well thought out solution to meet our needs and finally Greg and team who acted quickly to install given we had no heat.
We did our due diligence by soliciting quotes from alternate providers and were shocked and disappointed by the aggressive and manipulative tactics used.
Twintech was honest in their approach, detailed in their product knowledge, reasonably priced, diligent in their follow-up and valued our business.
Well done Twintech! You made this a positive experience for us and our new furnace works beautifully!
May 10, 2020
We recently purchased an Amana high efficiency furnace and humdifier through Twintech. The work was completed very professionally and the quality of the workmanship was high. There was some additional sheet metal work required to complete the installation, which they were able to complete themselves. Overall I am very pleased with the work and would highly recommend Twintech for a furnace replacement.
May 9, 2020
We were very pleased with every aspect of the work that was done. They were very professional and polite. They arrived when they said they would and job was completed on estimated time
We would highly recommend them to whoever needed a recommendation
We have a very large dog and they were very understanding and respectful of him being around