[BACK]
5 Things You Should Know When Installing an Air Conditioner
With the heat of the summer approaching, you may be looking to buy a new Central air conditioner.
Here are some tips to help you get the job done right! Today’s residential air conditioning systems are not as simple to install as they may appear.
Merely connecting all the tubing and wiring is just the beginning.
Beyond that, there are several important steps in the installation that can either make it or break it for you!
Here are 5 very important things that need to be done properly for your new air conditioner to last a long time.
This is how we do it day in and day out.
Number 1 - The installation of the evaporator coil (usually above your furnace) is a crucial part of a good install.
It must be installed in a way that directs all the air flowing out of your furnace, through the new matching evaporator coil.
This ensures that no air is flowing around it.
Also, the air leaks in the sheet metal work should be sealed with tape or sealant made for this purpose.
In the field, we often see an installation where the coil is mounted so that much of the air is flowing around the coil, which was never right to begin with.
We use 26 Gage Galvanized Metal Angle for this purpose because we come prepared to do it right.
Number 2 - The airspeed needs to be set at approximately 350 to 400 CFM per ton for air conditioning to work as it was designed to.
This is a very important step that is needed later when testing the level of “charge in your new system.
" Also, be sure to know the type of restrictor device your system has.
Is it a piston-type or a TXV (THERMOSTATIC EXPANSION VALVE)? It is not unusual, on a service call, to see that an installer has left the furnace fan speed set in the factory position, which is usually too high and a good indication that the charge was never checked when the AC was installed.
There can be a more negative effect on piston-type systems if the airflow is too high or low.
Systems equipped with a TXV also need to have the “bulb” installed in the correct location and orientation.
So many times, when removing someone’s old system we see the bulb still sitting in the shipping location, which means it was never working right from day one.
Number 3 - With today’s systems running on R410a refrigerant, it is more important than ever to have inert gas such as NITROGEN flowing through the copper tubing.
This is used to move the refrigerant from the outside unit (condenser) through the inside unit (evaporator).
The reason for this is that oxides can occur from the brazing process, and they contaminate the new system before it even starts.
This result can result in poor performance and a short life span of your new air conditioner.
Number 4 - It is important to test your new system for leaks before starting it up for the first time.
This is a two-part process that we follow on every installation.
The first step in this process is to pressure test all the welded joints, and since we are using NITROGEN for brazing, we just leave it connected to your new system.
Then, we pressurize the evaporator and new copper line welds up to 200 PSI for a few minutes.
If there is a leak, it will show on the gauge, and you may even be able to hear it if it's big enough.
It's not uncommon to have a small leak at this time because sometimes the position of the joint is difficult to access.
So by using NITROGEN as a first step, the system can be pre-approved as leak-free.
Number 5 - The final step we take, for all new installations or on any repair calls, is to use a Micron gauge to prove that the new system is 100 percent leak-free.
We pull our vacuums down to 250 microns using a properly calibrated digital gauge.
You cannot pull a deep vacuum, such as this, with any kind of small leak or non-condensable in the lines.
Once we establish the deep vacuum, then and only then, do we release the refrigerant from the new AC condenser that comes with a factory charge, which is usually sufficient for installations.
The final part of the start-up process is to measure the charge to ensure it is within the manufacturers' specifications.
We use digital gauges, which measure all the important things needed to be certain the system is right on the money, such as using a superheat calculation for piston-type systems and sub-cooling for systems equipped with a TXV.
We usually end up either having to add a bit of refrigerant to the system or remove a bit of refrigerant depending on the length of the tubing or other variables to dial in the charge just right.
Sometimes it takes an extra bit of time but now you are ready to enjoy many years of trouble-free air conditioning to keep your home comfortable through the hottest days of the season.
I had them replace my furnace last year. When it came time for the air conditioner this year, I did not hesitate to call Twintech again. I will also have them perform regular maintenance on them.
We required a new HVAC replacement after running the old
system for 18 years.
Dave understood our requirements and gave us a quote that
covered all the necessary items.
Installation was fast and very tidy. Everything works as
it should. Our thanks to Greg, Mitch and others for their
excellent work. Recommend this family owned business to
anyone else, considering HVAC or other work.
I needed a new furnace and A/C to replace my 21 yr. old units, and went to the internet to view potential companies in May, I received 3 quotes,
and chose Twintech based on their salesman Dave who was very detailed and covered off everything on what Twintech was all about,
an extremely dedicated company with so many years of experience, and after reading the on line reviews I was sold on Twintech, who did not disappoint as the installation team were top notch with Greg leading,
I would highly recommend this company without any doubts, in my books they are first class all the way. Our new Amana furnace and A/C are working perfectly !
Flawless transaction. They did exactly what they promised, showed-up on time, cleaned-up, and were highly professional. Highly recommended.
Salesperson and 2 man installation team were all professional and
knew their stuff. All three were friendly and helpful, answering all
my questions. The quality of their work demonstrated their experience
and expertise in their field.
A dear late cousin of mine recommended this company and I have been happy with the service.
We are very pleased with the work done by Twintech. They were very professional from start to finish. Dave came to our home and gave us a very competitive quote for new high efficiency furnace and air conditioner. The installers were very courteous and professional. We would highly recommend them.
Great experience getting an old furnace replaced.
Sales Guy (Dave) was great - honest, responsive, and friendly.
The work itself was done quickly and we are very happy with the outcome, thank you! We recommend TwinTech!
This review is late coming so my apologies to the amazing Twin Tech team! I contacted Dave at Twin Tech for a quote this past Feb (as I was collecting a few) and his recommendation was excellent. From the first meeting with Dave to the team installing the new furnace, not once did i feel uncomfortable . The team were extremely professional yet personable and clean and tidy. Decent companies still exist!
The new furnace just purrs and its just amazing the difference it has made!
(PS my sibling ended up getting a furnace from them as well)
The service was Twintech was excellent.
Dave our salesperson was easy to talk to and was professional. The unit recommended meets our needs and budget.
Greg and his team arrived on time for the installation and even got rid of the garbage the contractors left in our furnace.
Would definitely recommend Twintech.
Related Links:
ac repair services, furnace repairs pickering, central air conditioner services, whitby air and heating, whitby heating and air, ajax hvac repair, air conditioner repair, hvac repairs, heating repair company, house air conditioner repair, ac repair and service, whitby air conditioning, residential air conditioner repair, residential ac repair, pickering air conditioners, oshawa air conditioners, nearby ac repair, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace repairs, furnace repair, hvac repair service, central air conditioner, ajax furnace repair, ajax air conditioners,
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Amazing experience with TwinTech Heating & Cooling! Their team was professional, knowledgeable, and efficient from start to finish. They installed my new furnace quickly and left everything spotless. The technicians took the time to explain everything and made sure I was comfortable with the system before they left. Great customer service and fair pricing. I highly recommend them for anyone needing HVAC services!
Great experience all around. Bob was sharp and easy to talk to, and Greg handled the installation perfectly. Would hire them again in a heartbeat.
Choosing the right furnace for your home depends on several factors, including climate, home size, energy efficiency, and budget. Here’s a guide to help you decide: 1. Fuel Type Gas Furnace – Most common and efficient for colder
Read MoreFrequent furnace cleaning is essential for several reasons, ranging from efficiency to safety. Here are the key benefits of regular furnace maintenance: 1. Improves Efficiency A clean furnace operates more efficiently. Over time, dirt, du
Read MoreWhen addressing internal furnace issues, it's important to recognize common problems and their potential causes. Here’s a breakdown of some key internal furnace issues and how they can be resolved: 1. Clogged or Dirty Filters Cause
Read MoreSeveral factors can impact the performance of your air conditioning (AC) system. Here are some key ones: Size of the AC Unit: If the AC unit is too small, it won't effectively cool the space. Conversely, an oversized unit may cool too qu
Read More