Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
What Should I Do When My Amana Furnace Shuts Off?
Posted On: September 27, 2023
If your Amana furnace has shut off and you're experiencing heating issues, here are some specific steps you can take to troubleshoot the problem:
-
Check the Thermostat:
- Ensure that the thermostat is set to the desired temperature.
- Confirm that the mode is set to heating and the fan setting is appropriate.
-
Inspect the Furnace Switch:
- Locate the furnace switch on or near the unit and make sure it's in the "on" position.
-
Check the Circuit Breaker:
- Verify that the circuit breaker for the furnace hasn't tripped. If it has, reset it.
-
Inspect the Air Filter:
- A clogged air filter can cause the furnace to overheat and shut off. Check and replace the air filter if necessary.
-
Check for Error Codes:
- If your Amana furnace is equipped with a diagnostic display or LED codes, check for any error codes. Refer to your furnace's manual to interpret these codes and take appropriate action.
-
Inspect the Flame Sensor:
- The flame sensor is a crucial component that detects the presence of a flame. If it's dirty or malfunctioning, it may cause the furnace to shut off. Carefully clean the flame sensor with a fine abrasive pad or replace it if needed.
-
Inspect the Igniter (for Gas Furnaces):
- If you have a gas furnace, check the igniter. A faulty igniter can prevent the furnace from lighting. If you're not familiar with this component, it's advisable to seek professional help.
-
Check the Venting System:
- Ensure that the venting system is clear of obstructions. Blocked vents can cause the furnace to shut off for safety reasons.
-
Inspect the Condensate Line (for High-Efficiency Furnaces):
- If you have a high-efficiency furnace, check the condensate line for clogs. Clear any obstructions to ensure proper drainage.
-
Verify Gas Supply (for Gas Furnaces):
- Check that the gas supply to the furnace is sufficient and not interrupted.
If you've gone through these troubleshooting steps and the issue persists, it's recommended to contact a professional HVAC technician. Amana furnaces, like any heating system, may have specific components or features that require expert attention for diagnosis and repair. Attempting to fix complex issues without the necessary expertise could lead to further problems or safety hazards. Regular professional maintenance is also advisable to keep your furnace in optimal condition.
[BACK]
See What Our Customers Are Saying:
Feb 1, 2021
Dave was very pleasant to deal with and Twintech responded quickly when our furnace needed to be replaced ASAP. Installation was done on time and the crew were neat and tidy. We now have a great furnace that suits the needs of our family.
Feb 1, 2021
When your furnace kicks in over the holidays and you're not sure where to turn.. I'm so thankful that this company returned my phone call. I appreciated their transparency and clarity which allowed me to make an informed decision. With various quotes thrown at you, it can be difficult to make the right decision and trust the solutions offered by different companies. TwinTech spoke the truth and delivered on their word. Neat, timely and clean service; the peace of mind I needed during a very cold holiday season. I highly recommend them!
Feb 1, 2021
Pulling a old unit out and installing a modern heating system! Required drilling holes in the wall for the newer pipes. We went from 70% (I am willing to bet it was far less due to lack of maintenance and just old) to 96% newer . It now feels warmer and more pressure and we use to run extra heaters and feel as though they are not necessary!
Feb 1, 2021
I received three quotes before deciding to choose Twintech. Dave's prices was much more reasonable than the competitors. I most appreciated their honest recommendations. Others tried to oversell their products and services. Thank you Dave!
Feb 1, 2021
They had the best price and did a great job on the installation. Recommend them to anyone.
Feb 1, 2021
It was a amazing and professional high quality job
Friendly and very helpful representatives
Thank you for understanding my concern
And explain very well
Overall we pleased with your service
Tanks
May 15, 2020
My 19 year old furnace stopped working when the cold weather hit in November, and I was left without heat. I interviewed several companies and found TWINTECH HEATING and COOLING to be very knowledgeable, quick to respond to my inquiries and very competitively priced.
Dave provided all of the information and pricing ahead of time and set up the appointment for the installation. Greg and Mitch arrived on time to do the installation and worked quickly and efficiently to complete the job.
After the completion of the installation, Dave followed up to ensure that everything was working well and that I didn't have any concerns.
Overall, this was a low-stress and flawless experience from start to finish. I would highly recommend TWINTECH HEATING and COOLING to anyone that requires a new furnace.
May 14, 2020
Our 20 year old furnace broke down during the first cold weekend this past November and our usual HVAC company never returned our phone call. Their loss, missing out on a sale since we didn't want to spend much fixing an old furnace and our 40 year old air conditioner was also long overdue for replacement. We proceeded in obtaining three different quotes for furnace and air conditioner replacement, and proceeded with the one we received from Twintech.
Dave was friendly, knowledgable and accommodating to our schedule and provided with us with a price that fell in the middle of the three quotes that we had. We felt that the Amana furnace and air conditioner he quoted us on were the best products and value offered to us and felt most comfortable with the professionalism and reputation of Twintech.
Greg, Grant and Mitch were at our house for installation the day after we decided to proceed. The guys were friendly and informative, the job was completed efficiently and workmanship appears excellent. Our house is certainly much more comfortable with the new two-stage variable speed Amana furnace compared to the old clunker! And, we're looking forward to enjoying the new air conditioner once summer rolls around again. Thanks Twintech!
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,