Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
What Should I Do When My Amana Furnace Shuts Off?
Posted On: September 27, 2023
If your Amana furnace has shut off and you're experiencing heating issues, here are some specific steps you can take to troubleshoot the problem:
-
Check the Thermostat:
- Ensure that the thermostat is set to the desired temperature.
- Confirm that the mode is set to heating and the fan setting is appropriate.
-
Inspect the Furnace Switch:
- Locate the furnace switch on or near the unit and make sure it's in the "on" position.
-
Check the Circuit Breaker:
- Verify that the circuit breaker for the furnace hasn't tripped. If it has, reset it.
-
Inspect the Air Filter:
- A clogged air filter can cause the furnace to overheat and shut off. Check and replace the air filter if necessary.
-
Check for Error Codes:
- If your Amana furnace is equipped with a diagnostic display or LED codes, check for any error codes. Refer to your furnace's manual to interpret these codes and take appropriate action.
-
Inspect the Flame Sensor:
- The flame sensor is a crucial component that detects the presence of a flame. If it's dirty or malfunctioning, it may cause the furnace to shut off. Carefully clean the flame sensor with a fine abrasive pad or replace it if needed.
-
Inspect the Igniter (for Gas Furnaces):
- If you have a gas furnace, check the igniter. A faulty igniter can prevent the furnace from lighting. If you're not familiar with this component, it's advisable to seek professional help.
-
Check the Venting System:
- Ensure that the venting system is clear of obstructions. Blocked vents can cause the furnace to shut off for safety reasons.
-
Inspect the Condensate Line (for High-Efficiency Furnaces):
- If you have a high-efficiency furnace, check the condensate line for clogs. Clear any obstructions to ensure proper drainage.
-
Verify Gas Supply (for Gas Furnaces):
- Check that the gas supply to the furnace is sufficient and not interrupted.
If you've gone through these troubleshooting steps and the issue persists, it's recommended to contact a professional HVAC technician. Amana furnaces, like any heating system, may have specific components or features that require expert attention for diagnosis and repair. Attempting to fix complex issues without the necessary expertise could lead to further problems or safety hazards. Regular professional maintenance is also advisable to keep your furnace in optimal condition.
[BACK]
See What Our Customers Are Saying:
Apr 10, 2019
Had new furnace installed and ran into some difficulties but the contractor responded in a timely and efficient manner - after further service calls were made, a reasonable resolution was found.
Apr 8, 2019
The work was done quickly efficiently neatly and professionally. Pleased with the service, information, product, and the company.
Apr 1, 2019
Great sales member named Dave came in told us some amazing items and how they would be priced installed an all. We couldnt believe it! The next day the ac was installed, that day one employee named Greg told us that our furnace was working way to hard and was causing us to use way too much gas. So two days later they came in an installed a new furnace!
Apr 1, 2019
Installation was done quickly and professionally. The new furnace is quiet and provides even heat.
Mar 3, 2019
They removed and discarded old furnace. Installed new furnace. Installed air intake pipe, that had never been installed by builder, no charge. Replaced loose hose on floor with hard pipe and rerouted it to drain, no charge. Almost 33% cheaper then quote from Enercare, which was the company we dealt with and had insurance with for 8 years. No yearly fee for cleaning/insurance, saves 300 a year. Courteous, professional, fast, and friendly. My wife and I have been recommending them to everyone we know and meet, and will continue to do so. Thanks for everything, Twintech!!!
Mar 4, 2019
This company was great to deal with. Our furnace went down and they installed a new furnace the next day with a lot of professionalism!
Feb 22, 2019
Finally! An honest company with highly knowledgeable and informative staff. Had a furnace service and found multiply errors in our system from an amateur installer. Very fair price to correct problems and will definitely use again.
Feb 16, 2019
Had to replace the heating & a/c unit in a condo apartment dwelling. this company recommended by the property manager and president of the condo building. found their workmanship and attention to details very good and very thorough. were able to resolve small problems and situations and happy to feel the heat in my unit. it's pricey, but happy was done by a very professional service. thank you.
Feb 13, 2019
Fantastic team. Completed the job as per the specifications and in under 3 hours. Highly recommended Twintech.
Jan 30, 2019
During the summer, I previously hired TwinTech to replace my air conditioner when it failed. They did an excellent job so when I decided to proactively replace the furnace I contacted them. The furnace I had was 22 years old and showed signs of internal leakage. It still worked but rather than wait to have it fail in cold weather, I decided to purchase a higher efficiency model before it failed and take advantage of energy efficiency rebates. TwinTech offered very useful advice on the make and model of furnace to choose including high efficiency and variable speed motor. The price was reasonable, TwinTech arrived at the allotted time, installed the new furnace (including some re-routing of exhaust lines since the existing ones were too close to other vents), removed the old furnace, tested the installation and cleaned everything up. Overall, it was a good experience, they did a great job and the new furnace is working well.
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,