Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Differences Between Furnace and Heat Pump Heating
Posted On: September 30, 2023
Furnaces and heat pumps are both common heating systems, but they operate in different ways. Here are the key differences between furnace and heat pump heating:
-
Heat Source:
- Furnace: A furnace generates heat by burning a fuel, typically natural gas, propane, or oil. The combustion process produces hot air, which is then distributed throughout the house via ductwork.
- Heat Pump: A heat pump, on the other hand, does not generate heat but moves it from one place to another. It extracts heat from the air or ground outside the home and transfers it inside during the heating season. In cooling mode, the process is reversed, and it extracts heat from inside and releases it outside.
-
Energy Efficiency:
- Furnace: Traditional furnaces have efficiency ratings, and newer models can be highly efficient. However, they still burn fuel to produce heat, and some energy is lost through the combustion process.
- Heat Pump: Heat pumps are known for their energy efficiency because they transfer heat rather than generate it. They can provide more energy-efficient heating in moderate climates. However, their efficiency can decrease in extremely cold climates.
-
Climate Suitability:
- Furnace: Furnaces are well-suited for colder climates where temperatures frequently drop below freezing. They can provide reliable and efficient heating even in extremely cold conditions.
- Heat Pump: Heat pumps are more effective in milder climates. In extremely cold temperatures, especially below freezing, the efficiency of a heat pump decreases, and supplementary heating may be required.
-
Initial Cost and Installation:
- Furnace: Furnaces generally have lower upfront costs, especially for homes with existing ductwork. Installation is often straightforward, especially if the infrastructure is already in place.
- Heat Pump: Heat pumps may have higher upfront costs, and the installation can be more complex, especially if ductwork is not already in place. However, they can be more cost-effective in the long run due to their energy efficiency.
-
Maintenance:
- Furnace: Furnaces require regular maintenance, including cleaning of burners, inspection of the combustion system, and changing air filters. Combustion-based systems may also involve safety considerations such as checking for gas leaks.
- Heat Pump: Heat pumps generally require less maintenance. Regular tasks may include cleaning the coils and filters, but there is no combustion process to monitor.
-
Cooling Capability:
- Furnace: Furnaces do not provide cooling. A separate air conditioning system is needed for cooling purposes.
- Heat Pump: Heat pumps have a dual function; they can provide both heating and cooling by reversing the refrigeration cycle. This dual functionality can be an advantage in regions with moderate climates.
In summary, the choice between a furnace and a heat pump depends on factors such as climate, energy efficiency goals, upfront costs, and existing infrastructure in the home. Each system has its advantages and limitations, and homeowners should consider their specific needs and circumstances when selecting a heating system.
[BACK]
See What Our Customers Are Saying:
Jul 2, 2017
Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!
Jun 29, 2017
Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.
Jun 28, 2017
Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.
Jun 28, 2017
We had Grant and Greg Dainty quote to replace our 20 yr old furnace. I have known them for years and have had other jobs done by them ( AC and Pool Htr). The price was very reasonable and the job was completed in one day.
Jun 23, 2017
TwinTech was the right choice. Our consultation with Dave set the tone. Professional and knowledgeable, we even received a follow-up call within hours of our install completion, wow! TwinTech arrived as scheduled to install our A/C unit. Within minutes of arrival Greg noted and explained a few out of code faults on our furnace installed by another company, problems fixed, thanks TwinTech. Greg, Grant and "Subaru" Pete were meticulous start to finish. Highly recommended!
Jun 13, 2017
Twintech replaced our aging +20 yrs old Furnace & AC with the variable high efficiency Napoleon Furnace matched with the Goodman AC. Sales guy ,Dave was great, gave a no pressure estimate, explained about the Government Rebate program which they took care of completely including arranging the home energy audit. On the scheduled day Greg and his team arrived on time, did a great job and completed the same day , extremely professional and courteous, cleaned up everything , tested the system, Greg took his time to explain the setup. Very impressed with the Napoleon Furnace 9600 which did a great job in maintaining a comfortable temperature last winter and now with the hot weather the Goodman AC cooled the house in much less time than the old AC unit could ever. From start to finish Twintech were great and have no hesitation in recommending them 100%.
Jun 13, 2017
The Twintech team did an excellent job installing our new Goodman air conditioner. They were polite and professional. Greg was knowledgeable and clearly experienced. Thank you Twintech for bringing our cooling system up to current regulations. Job well done!
Jun 11, 2017
Dave from TwinTech was very knowledgeable, professional and thorough in the buying process. He helped us to identify the best furnace for our home and our budget. When we needed a new filter a year later and seemed to have a problem finding the right one, I called Dave up and he delivered a filter to me the next day! The cost was on par with other retailers, but it was this unexpected personal service that really was impressive. The furnace? Works like a charm.
May 27, 2017
Imagine, it's 5 minutes after the midnight countdown New Year's eve and the furnace quits. We called TwinTech fully expecting to leave a message and actually spoke with Greg, one of the owners! We had an immediate repair early the next morning & a new furnace within the week. We have entrusted TwinTech with all our home HVAC service needs for over 6 years. That's why this week with an opportunity to purchase a new BBQ, we called them 1st to see about a gas line install. It's chicken on the grill tonight! They are efficient, reliable, honest, hard working, and -- attentive is an understatement.
Jan 19, 2016
Wonderful customer service, starting from the job quote (Dave), to the clean install, to the follow-up. Twintech is a small company which installed my Napoleon furnace, A/C, John Wood tank, and ran the line for my gas dryer. The installation was completed as promised in one day. The work area was kept very clean, and they even took care of my old rental tank. The professionalism and wonderful customer service is second to none. They completed all of my rebate paperwork, and now I'm getting $2000 back! You will not be disappointed if you hire this company for your project.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,