Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Why is My Furnace Not Heating Properly?
Posted On: October 29, 2023
However, here are some common reasons why a furnace may not be heating properly:
-
Thermostat Settings:
- Check if the thermostat is set to the desired temperature.
- Ensure that the thermostat is set to the "Heat" mode.
-
Clogged or Dirty Filters:
- A dirty or clogged air filter can restrict airflow, reducing the efficiency of the furnace. Replace or clean the air filter regularly, typically every 1-3 months.
-
Pilot Light/Ignition Issues:
- If your furnace has a pilot light, ensure it is lit. For newer models with electronic ignition, check for error codes or ignition issues.
-
Gas Supply Issues:
- Verify that the gas supply to the furnace is turned on. If you suspect a gas supply issue, contact a professional immediately for assistance.
-
Thermocouple Problems:
- A faulty thermocouple may cause the gas supply to the furnace to be shut off. This is a safety feature to prevent gas leaks. A technician can check and replace a faulty thermocouple.
-
Burner Issues:
- Dirty or malfunctioning burners can affect the heating efficiency. If the burners are not lighting or staying lit, it may require cleaning or adjustment.
-
Blower Motor Problems:
- If the blower motor is not working correctly, it can result in inadequate heat distribution. Check for unusual noises or lack of airflow.
-
Ductwork Issues:
- Leaks or blockages in the ductwork can reduce the efficiency of your furnace. Inspect the ducts for any visible issues.
-
Dirty or Blocked Vents:
- Ensure that all vents and registers are open and not blocked by furniture or other obstacles. Clean any dust or debris around the vents.
-
Electrical Issues:
- Check for tripped circuit breakers or blown fuses in the electrical panel that powers the furnace.
If you have checked these common issues and your furnace still isn't functioning properly, it's recommended to contact a licensed HVAC professional to diagnose and address the problem. Working with gas appliances and furnaces can be dangerous, so it's crucial to prioritize safety and seek professional assistance when needed.
[BACK]
See What Our Customers Are Saying:
Jun 5, 2018
All interactions from sales to installation were Courteous and professional. The installation was seamless and the attention to detail including clean up was outstanding. I highly recommend TwinTech Heating and Cooling.
May 17, 2018
Twintech's Salesman Dave arrived promptly was friendly and courteous, listened and assured us the installation would be completed according to our requests. The crew arrived early morning on May 11th, 2018 and worked through till late afternoon non-stop. They were very friendly, very professional, their expertise was excellent, their workmanship outstanding and the installation was completed in a timely and efficient manner. We were completely satisfied and happy with the quality of the work.
May 9, 2018
I had cold and hot spots all over my 70 yr old home. My furnace is quite new and Greg optimized the fan and furnace. The original installer just took it out of the box with factory settings and installed it- basically running at 50% of capacity. Greg also routed heat into my laundry room, yeah - so now I can renovate laundry room - thanks Greg. He is honest, professional and knowledgeable. I will be calling him back in the spring to optimize my AC as well.
May 8, 2018
Wonderful from beginning to end. I tend to fret and worry about home improvements but the excellent team at TwinTech put my mind as ease. They listen, they are patient and best of all ... the work they did is amazing! I chose the Goodman 80K BTU 2 stage furnace and the matching Goodman air conditioner. Greg, Grant and Poitr "Peter" arrived on time, took great care, explained everything to me and they answered all of my questions. They carefully adjusted the factory settings to optimize the furnace for my house and they also checked the duct work in the basement. Dave, the Sales Manager, came by to say "hello" and to see if I was happy. YES, I am happy with the work! The furnace is very quiet. I have it running on low just to circulate the air in the house and it's so much quieter than my old furnace. When I need new duct work for an upcoming basement renovation TwinTech will be my first choice. I highly recommend TwinTech. PS. They were even nice to my dogs.
Apr 21, 2018
Greg was prompt on the scheduled day of installation and the work was done well within the time estimated beforehand. Installation was neat and the equipment and scope of work was as specified in the quote. One item I must point out is that we were faced with a "No Heat" situation the day before the scheduled installation and Greg came out to address it free of charge. Not only that, but he also corrected an installation fault with our smart thermostat that was not part of the original job, again free of charge.
Mar 16, 2018
Greg came by to do a routine furnace checkup. He was very knowledgeable and professional, letting me know what's being checked/adjusted and giving me tips to ensure everything runs smooth. Very honest and upfront about what's working fine vs. what may need to be fixed/replaced. He didn't attempt to up sell anything that wasn't necessary. I'm glad to have finally found someone I can trust and rely on for all my HVAC needs - furnace, A/C, and hot water tank.
Mar 4, 2018
I'm very happy with the work that was done. Everyone from salesperson to the installers were friendly and professional. They were on time and cleaned up the job site after it was installed. They also answered all my follow up questions promptly. I wouldn't hesitate to work with them or recommend them again.
Feb 28, 2018
Thanks to the team at Twin Tech for a great job installing my new heat pump/ac unit. The guys were very polite and professional. When they left you would never have known they had been there except for the new Mitsubishi unit on the wall!! would highly recommend the Twin Tech team.
Feb 28, 2018
Installed professionally, no delays, no rework needed. Very reliable contractor and sales person. Also installed BBQ gas line and some duct work.
Feb 19, 2018
Greg and Grant are friendly, reliable, and knowledgeable HVAC professionals. The twins, Dave and the entire team provided efficient top quality service. Our family plns to use Twintech for all of our future HVAC needs.
Related Links:
heat pump system cost, oshawa heating technician, 5 ton heat pump, whitby air and heating, whitby heating and air, ajax heating technician, heating technician, heating technician, heating and cooling, indoor heat pumps, heating repair company, heat pump technology, emergency heating service, residential heat pump system, oshawa heating and cooling, heat pump hvac system, heating system installation, heating contractors near me whitby, heating contractors near me, heat pump, heating services near me, heating and cooling services, commercial heating and cooling,