Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Amana Furnace Troubleshooting Tips
Posted On: November 23, 2023
If you're experiencing issues with your Amana furnace, there are several troubleshooting tips you can try before calling a professional technician. Keep in mind that furnace troubleshooting can be complex, and if you are unsure or uncomfortable with any step, it's best to contact a qualified HVAC technician. Here are some general troubleshooting tips for Amana furnaces:
-
Check the Thermostat:
- Ensure the thermostat is set to the desired temperature.
- Replace the thermostat batteries if applicable.
- Make sure the thermostat is in the heating mode.
-
Inspect the Air Filter:
- A dirty or clogged air filter can restrict airflow and affect furnace performance.
- Check and replace the air filter if it's dirty or clogged.
-
Inspect the Furnace Power:
- Make sure the furnace is receiving power. Check the circuit breaker and reset it if necessary.
- Ensure the furnace switch (usually located on or near the furnace) is in the "ON" position.
-
Check the Gas Supply:
- Ensure that the gas supply to the furnace is turned on.
- If you suspect a gas leak, immediately leave your home and contact your gas company.
-
Inspect the Pilot Light or Ignitor:
- For older furnaces with a pilot light, make sure it is lit.
- For newer furnaces with electronic ignitors, check for any error codes and refer to the manual for troubleshooting.
-
Reset the Furnace:
- Some furnaces have a reset button. Refer to your furnace manual to locate and use the reset button.
-
Inspect Ventilation System:
- Ensure that vents and registers are not blocked or closed.
- Check for any obstructions in the flue or vent pipe.
-
Check for Error Codes:
- If your furnace has a diagnostic system with error codes, refer to the manual to interpret the codes and take appropriate action.
-
Schedule Regular Maintenance:
- Regular professional maintenance can prevent many issues. If it's been a while since your last maintenance visit, consider scheduling one.
-
Contact Amana Customer Support:
- If you're unable to resolve the issue, contact Amana customer support or a qualified HVAC technician for assistance.
Remember, safety is a top priority when dealing with furnaces. If you are unsure about any troubleshooting step or if you smell gas, it's crucial to evacuate your home immediately and contact a professional for assistance.
[BACK]
See What Our Customers Are Saying:
Jul 23, 2017
I have used Twintech many times over the years. They always arrive quickly and get the issue fixed. The most recent incident was when my air conditioner broke last week I called Greg at 11:30am and he was at my home by 2:30pm he had the unit fixed by 3:30pm. Twintech are very reliable and honest and they are experts in the field. I have already recommended them to many of my friends. I would not use anyone but them for my heating and air conditioning issues.
Jul 17, 2017
I would highly recommend these guys, professional, fast and competitive pricing. I moved into this place with no working AC unit with a 8 month baby, he was able to come with in a week to fix even in the busy summer days. He really values his customers , I am already recommending to my neighbors.
Jul 2, 2017
Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!
Jun 29, 2017
Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.
Jun 28, 2017
Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.
Jun 28, 2017
We had Grant and Greg Dainty quote to replace our 20 yr old furnace. I have known them for years and have had other jobs done by them ( AC and Pool Htr). The price was very reasonable and the job was completed in one day.
Jun 23, 2017
TwinTech was the right choice. Our consultation with Dave set the tone. Professional and knowledgeable, we even received a follow-up call within hours of our install completion, wow! TwinTech arrived as scheduled to install our A/C unit. Within minutes of arrival Greg noted and explained a few out of code faults on our furnace installed by another company, problems fixed, thanks TwinTech. Greg, Grant and "Subaru" Pete were meticulous start to finish. Highly recommended!
Jun 13, 2017
Twintech replaced our aging +20 yrs old Furnace & AC with the variable high efficiency Napoleon Furnace matched with the Goodman AC. Sales guy ,Dave was great, gave a no pressure estimate, explained about the Government Rebate program which they took care of completely including arranging the home energy audit. On the scheduled day Greg and his team arrived on time, did a great job and completed the same day , extremely professional and courteous, cleaned up everything , tested the system, Greg took his time to explain the setup. Very impressed with the Napoleon Furnace 9600 which did a great job in maintaining a comfortable temperature last winter and now with the hot weather the Goodman AC cooled the house in much less time than the old AC unit could ever. From start to finish Twintech were great and have no hesitation in recommending them 100%.
Jun 13, 2017
The Twintech team did an excellent job installing our new Goodman air conditioner. They were polite and professional. Greg was knowledgeable and clearly experienced. Thank you Twintech for bringing our cooling system up to current regulations. Job well done!
Jun 11, 2017
Dave from TwinTech was very knowledgeable, professional and thorough in the buying process. He helped us to identify the best furnace for our home and our budget. When we needed a new filter a year later and seemed to have a problem finding the right one, I called Dave up and he delivered a filter to me the next day! The cost was on par with other retailers, but it was this unexpected personal service that really was impressive. The furnace? Works like a charm.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,