Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Fine Tuning Your Furnace System
Posted On: March 3, 2024
Fine-tuning your gas furnace is an important aspect of home maintenance, especially before the onset of colder months when you'll rely on it for warmth.
Here's a step-by-step guide to help you:
Turn Off Power: Before performing any maintenance, turn off the power to your furnace.
You can typically do this by switching off the circuit breaker that controls the furnace.
Clean or Replace Air Filters: Dirty air filters restrict airflow, reducing the efficiency of your furnace.
Depending on the type of filter you have, clean or replace it according to the manufacturer's recommendations.
This is usually required every 1-3 months.
Inspect the Thermostat: Make sure your thermostat is functioning correctly.
Replace the batteries if necessary and ensure it's set to the desired temperature.
Check Air Vents and Registers: Ensure all air vents and registers throughout your home are open and unobstructed.
Blocked vents can hinder airflow and decrease the efficiency of your furnace.
Inspect the Flue: The flue is responsible for safely venting combustion gases out of your home.
Check for any obstructions or blockages in the flue pipe and make sure it's securely attached to the furnace and the exterior vent.
Inspect and Clean the Blower: The blower motor and fan are responsible for circulating heated air throughout your home.
Inspect the blower assembly for any dust or debris buildup and clean it if necessary.
Ensure the fan blades are clean and free of obstructions.
Check for Leaks: Inspect the furnace and its connections for any signs of gas leaks, such as hissing sounds or a sulfur-like odor.
If you detect a gas leak, immediately turn off the gas supply and contact a professional technician.
Inspect the Pilot Light or Ignition System: If your furnace has a pilot light, ensure it's lit and burning steadily.
If your furnace has an electronic ignition system, check for any error codes on the control panel.
Inspect the Burners: Inspect the burners for any signs of corrosion or debris buildup.
If necessary, clean the burners using a soft brush or compressed air.
Check the Furnace's Operation: After completing the above steps, turn on the power to your furnace and observe its operation.
Listen for any unusual noises and pay attention to the cycling of the furnace.
If you notice any issues, contact a professional technician for further inspection and repair.
Schedule Professional Maintenance: While performing these tasks can help keep your furnace running smoothly, it's also essential to schedule professional maintenance at least once a year.
A qualified technician can perform a thorough inspection, clean internal components, and identify any potential problems before they escalate.
By following these steps and maintaining your gas furnace regularly, you can ensure optimal performance, energy efficiency, and safety throughout the heating season.
Contact Twintech today at 1-844-894-6832
[BACK]
See What Our Customers Are Saying:
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
May 11, 2020
We couldnt have been more impressed with Twintech - from our first service call with Mitch who took the time to thoroughly diagnose the issue with our furnace, to Dave who proposed a well thought out solution to meet our needs and finally Greg and team who acted quickly to install given we had no heat.
We did our due diligence by soliciting quotes from alternate providers and were shocked and disappointed by the aggressive and manipulative tactics used.
Twintech was honest in their approach, detailed in their product knowledge, reasonably priced, diligent in their follow-up and valued our business.
Well done Twintech! You made this a positive experience for us and our new furnace works beautifully!
May 10, 2020
We recently purchased an Amana high efficiency furnace and humdifier through Twintech. The work was completed very professionally and the quality of the workmanship was high. There was some additional sheet metal work required to complete the installation, which they were able to complete themselves. Overall I am very pleased with the work and would highly recommend Twintech for a furnace replacement.
May 9, 2020
We were very pleased with every aspect of the work that was done. They were very professional and polite. They arrived when they said they would and job was completed on estimated time
We would highly recommend them to whoever needed a recommendation
We have a very large dog and they were very understanding and respectful of him being around
May 8, 2020
The blower on our furnace stopped working leaving us with a cold house. Dave from TwinTech responded immediately to our HomeStars service request. From beginning to end Dave was nothing but helpful, friendly and professional, he did a great job of walking us through the quote and scope of work.
The replacement of the furnace went smoothly. The Guys did a great job, everyone was very friendly and polite. There were no hiccups, or unexpected costs. The only surprise was they left the work area cleaner than it was before they started.
Was a great experience with the whole TwinTech team. Its been a couple of months since the new furnace has been installed and its working great!
May 7, 2020
I heard about TwinTech when researching new furnaces at furnaceprices.ca. After contacting them about my broken down furnace, Dave came to my house the next day to assess my situation and requirements for a new furnace. He recommended one that had stainless steel heat exchangers which sold me since my previous furnace had issues with a rusted secondary heat exchanger that had to be replaced. Dave also set me up with an appointment with an energy audit company so that I could take advantage of a rebate to help improve the energy efficiency of my home and get some money back. A few days later, Greg, Grant, and Mitch came to install the new furnace and remove the old one. When delivering and removing the furnaces, they were very careful not to damage my floors and walls, and even laid out red carpeting to protect the floors. They were very friendly and professional. The installation was completed in the time they said it would take and they cleaned up their work areas. Within a week, Dave called to follow-up to see how everything was going. I have already recommended them to several friends and family members who may need new furnaces soon.
May 6, 2020
Twintech did a great job, from Dave the Sales Rep to the Office staff and The Professional Technicians who did the installation. They were professional, courteous, knowledgable and informative. From beginning to follow up we were completely satisfied with everything. Thanks Again. Sincerely The Laytons
May 5, 2020
Great product, great service, great follow-up. The Twintech Heating and Cooling arranged removal of my existing oil tank and they installed the new gas furnace Amana (made in USA). I am very happy with the final result and support I received throughout the process. My thanks go to the entire Twintech team for their professionalism, great communication and follow-up.
May 4, 2020
We've had Twintech provide us with work in the past, for an inground pool heater and required rough-in for a new gas stove. More recently they provided the same friendly, professional, timely and clean installation of our new furnace.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,