[BACK]
Heating System: The Ultimate Maintenance Checklist
In some places, heating systems are in full force as they warm homes and keep families comfortable.
This is why for some families, the use of heating systems has been a part of their daily norm.
Maintaining your heating system regularly is essential if you want to keep your home comfortable during the cooler months, and even the warmer ones.
That is why we are here to help you give your heating system the maintenance it needs.
Check out our heating system maintenance checklist for all the maintenance items you should be doing to help keep your furnace or heat pump functioning properly: *Schedule a professional heating system maintenance.
If you haven’t done this already, then you should.
A licensed HVAC technician’s heating system maintenance checklist covers all technical items that most homeowners are not capable of dealing with by themselves.
*Change your furnace filter.
Having a fresh filter lets you have better indoor air quality and performance.
It also does a better job in terms of removing contaminants as the air circulates, and it allows your heating system to receive the airflow it needs to lower energy consumption.
*Clear the area that surrounds your heating equipment.
Keep in mind that proper airflow is essential to have a well-functioning furnace or heat pump.
When there are items near the heating system, the airflow to the unit is also reduced.
This makes your unit work harder just to achieve the proper airflow it needs, thus consuming more energy.
Storing flammable items such as gasoline and cleaners near your heating system is a fire hazard, so be sure to never do this.
You should leave a six-foot clear zone around your air handler or furnace to protect your system as well as your household.
For your heat pump system, you should also remove all debris and items surrounding your outdoor unit for proper airflow.
*Check carbon monoxide detectors.
If your home is not yet equipped with carbon monoxide detectors, then now is the perfect time to install them – one for each floor of your home.
You should take the time to check the power sources for all your units.
Replace old batteries with fresh ones, and you should also test hard-wired connections to your home’s electrical system.
*Clear vents and registers.
You should walk through your home and check each room.
See that no rugs, furniture, or other items are blocking your return and supply registers.
Make sure to move items away from the registers to allow air to move properly throughout the living areas of your home.
This helps keep rooms warmer and your heating system to operate more efficiently.
I had cold and hot spots all over my 70 yr old home. My furnace is quite new and Greg optimized the fan and furnace. The original installer just took it out of the box with factory settings and installed it- basically running at 50% of capacity. Greg also routed heat into my laundry room, yeah - so now I can renovate laundry room - thanks Greg. He is honest, professional and knowledgeable. I will be calling him back in the spring to optimize my AC as well.
Wonderful from beginning to end. I tend to fret and worry about home improvements but the excellent team at TwinTech put my mind as ease. They listen, they are patient and best of all ... the work they did is amazing! I chose the Goodman 80K BTU 2 stage furnace and the matching Goodman air conditioner. Greg, Grant and Poitr "Peter" arrived on time, took great care, explained everything to me and they answered all of my questions. They carefully adjusted the factory settings to optimize the furnace for my house and they also checked the duct work in the basement. Dave, the Sales Manager, came by to say "hello" and to see if I was happy. YES, I am happy with the work! The furnace is very quiet. I have it running on low just to circulate the air in the house and it's so much quieter than my old furnace. When I need new duct work for an upcoming basement renovation TwinTech will be my first choice. I highly recommend TwinTech. PS. They were even nice to my dogs.
Greg was prompt on the scheduled day of installation and the work was done well within the time estimated beforehand. Installation was neat and the equipment and scope of work was as specified in the quote. One item I must point out is that we were faced with a "No Heat" situation the day before the scheduled installation and Greg came out to address it free of charge. Not only that, but he also corrected an installation fault with our smart thermostat that was not part of the original job, again free of charge.
Greg came by to do a routine furnace checkup. He was very knowledgeable and professional, letting me know what's being checked/adjusted and giving me tips to ensure everything runs smooth. Very honest and upfront about what's working fine vs. what may need to be fixed/replaced. He didn't attempt to up sell anything that wasn't necessary. I'm glad to have finally found someone I can trust and rely on for all my HVAC needs - furnace, A/C, and hot water tank.
I'm very happy with the work that was done. Everyone from salesperson to the installers were friendly and professional. They were on time and cleaned up the job site after it was installed. They also answered all my follow up questions promptly. I wouldn't hesitate to work with them or recommend them again.
Thanks to the team at Twin Tech for a great job installing my new heat pump/ac unit. The guys were very polite and professional. When they left you would never have known they had been there except for the new Mitsubishi unit on the wall!! would highly recommend the Twin Tech team.
Installed professionally, no delays, no rework needed. Very reliable contractor and sales person. Also installed BBQ gas line and some duct work.
Greg and Grant are friendly, reliable, and knowledgeable HVAC professionals. The twins, Dave and the entire team provided efficient top quality service. Our family plns to use Twintech for all of our future HVAC needs.
Very impressed with this company. They show up on time , kept my place clean and after they left it looks like they were never there. Very professional team. Those people know what they doing . Their installation was on the highest standard. They are very knowledgeable especially they're worker Peter. I strongly recommend this company to everybody. After the installation I receive the call making sure I'm satisfied with their products and their job. Bravo!!!
Greg and his brother were referred to us by a friend. They arrived when they said they would, did an exceptional job and left the place as tidy or tidier then they found it. Their professionalism is only surpassed by their kind and friendly demeanor. Even after several calls to help me with my high tech thermostat I feel that I could always call with any concern (No one responds to my texts as quickly as Greg) and have a friendly helpful response. I found out their grandfather started the company and now as a 3rd generation company, they are doing their grandfather proud. I would highly recommend Twintech over any other hvac company out there.
Related Links:
heat pump system cost, oshawa heating technician, 5 ton heat pump, whitby air and heating, whitby heating and air, ajax heating technician, heating technician, heating technician, heating and cooling, indoor heat pumps, heating repair company, heat pump technology, emergency heating service, residential heat pump system, oshawa heating and cooling, heat pump hvac system, heating system installation, heating contractors near me whitby, heating contractors near me, heat pump, heating services near me, heating and cooling services, commercial heating and cooling,
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Amazing experience with TwinTech Heating & Cooling! Their team was professional, knowledgeable, and efficient from start to finish. They installed my new furnace quickly and left everything spotless. The technicians took the time to explain everything and made sure I was comfortable with the system before they left. Great customer service and fair pricing. I highly recommend them for anyone needing HVAC services!
Great experience all around. Bob was sharp and easy to talk to, and Greg handled the installation perfectly. Would hire them again in a heartbeat.
Improving the efficiency of your air conditioning (AC) unit can lead to lower energy bills and a more comfortable indoor environment. Here are some steps you can take to increase your AC unit's efficiency: Regular Maintenance: Schedule a
Read MoreIf you suspect that your heat pump is frozen, there are several signs and steps you can take to address the issue. Here are some indications that your heat pump may be frozen and what you can do about it: Signs that Your Heat Pump is Frozen:
Read MoreYes, a furnace can experience a reduction in efficiency as it ages. Several factors contribute to this decline. Wear and Tear: Over time, the components of a furnace, such as the heat exchanger, blower motor, and igniter, can wear out or become
Read MoreIf you're wondering whether your furnace is having issues, here are some common signs to look for: 1. Unusual Noises Banging, clanking, or squealing sounds may indicate a mechanical issue. Rattling or vibrating can signal loose parts.
Read More