Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
Posted On: October 9, 2024
When addressing internal furnace issues, it's important to recognize common problems and their potential causes. Here’s a breakdown of some key internal furnace issues and how they can be resolved:
1. Clogged or Dirty Filters
- Cause: Filters trap dust, dirt, and allergens, but when they become clogged, it restricts airflow.
- Effect: This can cause the furnace to overheat, reduce efficiency, and increase energy bills.
- Solution: Regularly replace or clean filters every 1-3 months.
2. Ignition or Pilot Control Issues
- Cause: Problems with the ignition system (electronic ignition or pilot light) can prevent the furnace from properly heating.
- Effect: This can result in intermittent heating or the furnace not starting at all.
- Solution: Check for loose connections, gas flow issues, or malfunctioning pilot controls. If unsure, consult a technician.
3. Blower Motor Malfunctions
- Cause: The blower motor pushes warm air through the duct system, but wear and tear or dust buildup can affect its performance.
- Effect: The furnace may run but won’t circulate warm air properly, leading to cold spots in the home.
- Solution: Have the motor cleaned and serviced regularly. In some cases, the motor may need replacing.
4. Limit Switch Failure
- Cause: A malfunctioning limit switch can prevent the blower from turning off, causing the furnace to overheat.
- Effect: This not only increases energy usage but also poses a safety risk.
- Solution: Have the limit switch tested and replaced if necessary.
5. Cracked Heat Exchanger
- Cause: Over time, the heat exchanger can crack due to stress and temperature fluctuations.
- Effect: A cracked heat exchanger can leak carbon monoxide, a dangerous and potentially lethal gas.
- Solution: If a crack is detected, the heat exchanger must be replaced immediately.
6. Thermostat Malfunctions
- Cause: A faulty thermostat may fail to communicate with the furnace, leading to improper heating cycles.
- Effect: The furnace may not turn on or off at the desired temperature.
- Solution: Check thermostat settings, replace batteries, or consider upgrading to a programmable model.
7. Dirty Burners
- Cause: Burners that are dirty or misaligned can cause inefficient combustion.
- Effect: This reduces heat output and can lead to safety hazards like gas leaks or carbon monoxide emissions.
- Solution: Have a professional clean and inspect the burners.
8. Frequent Cycling
- Cause: If the furnace frequently turns on and off, it may be due to improper airflow, thermostat issues, or an oversized unit.
- Effect: Frequent cycling reduces efficiency and puts additional wear on furnace components.
- Solution: Address airflow problems, check thermostat calibration, or consult an expert to ensure the furnace is appropriately sized.
Conclusion
Preventative maintenance and regular inspections can help avoid many of these internal furnace issues. Scheduling annual furnace tune-ups will ensure your system runs efficiently and safely, especially during peak usage seasons.
[BACK]
See What Our Customers Are Saying:
May 11, 2020
We couldnt have been more impressed with Twintech - from our first service call with Mitch who took the time to thoroughly diagnose the issue with our furnace, to Dave who proposed a well thought out solution to meet our needs and finally Greg and team who acted quickly to install given we had no heat.
We did our due diligence by soliciting quotes from alternate providers and were shocked and disappointed by the aggressive and manipulative tactics used.
Twintech was honest in their approach, detailed in their product knowledge, reasonably priced, diligent in their follow-up and valued our business.
Well done Twintech! You made this a positive experience for us and our new furnace works beautifully!
May 10, 2020
We recently purchased an Amana high efficiency furnace and humdifier through Twintech. The work was completed very professionally and the quality of the workmanship was high. There was some additional sheet metal work required to complete the installation, which they were able to complete themselves. Overall I am very pleased with the work and would highly recommend Twintech for a furnace replacement.
May 9, 2020
We were very pleased with every aspect of the work that was done. They were very professional and polite. They arrived when they said they would and job was completed on estimated time
We would highly recommend them to whoever needed a recommendation
We have a very large dog and they were very understanding and respectful of him being around
May 8, 2020
The blower on our furnace stopped working leaving us with a cold house. Dave from TwinTech responded immediately to our HomeStars service request. From beginning to end Dave was nothing but helpful, friendly and professional, he did a great job of walking us through the quote and scope of work.
The replacement of the furnace went smoothly. The Guys did a great job, everyone was very friendly and polite. There were no hiccups, or unexpected costs. The only surprise was they left the work area cleaner than it was before they started.
Was a great experience with the whole TwinTech team. Its been a couple of months since the new furnace has been installed and its working great!
May 7, 2020
I heard about TwinTech when researching new furnaces at furnaceprices.ca. After contacting them about my broken down furnace, Dave came to my house the next day to assess my situation and requirements for a new furnace. He recommended one that had stainless steel heat exchangers which sold me since my previous furnace had issues with a rusted secondary heat exchanger that had to be replaced. Dave also set me up with an appointment with an energy audit company so that I could take advantage of a rebate to help improve the energy efficiency of my home and get some money back. A few days later, Greg, Grant, and Mitch came to install the new furnace and remove the old one. When delivering and removing the furnaces, they were very careful not to damage my floors and walls, and even laid out red carpeting to protect the floors. They were very friendly and professional. The installation was completed in the time they said it would take and they cleaned up their work areas. Within a week, Dave called to follow-up to see how everything was going. I have already recommended them to several friends and family members who may need new furnaces soon.
May 6, 2020
Twintech did a great job, from Dave the Sales Rep to the Office staff and The Professional Technicians who did the installation. They were professional, courteous, knowledgable and informative. From beginning to follow up we were completely satisfied with everything. Thanks Again. Sincerely The Laytons
May 5, 2020
Great product, great service, great follow-up. The Twintech Heating and Cooling arranged removal of my existing oil tank and they installed the new gas furnace Amana (made in USA). I am very happy with the final result and support I received throughout the process. My thanks go to the entire Twintech team for their professionalism, great communication and follow-up.
May 4, 2020
We've had Twintech provide us with work in the past, for an inground pool heater and required rough-in for a new gas stove. More recently they provided the same friendly, professional, timely and clean installation of our new furnace.
May 3, 2020
Reasonable price and the workmanship was prompt and timely and the employees were great to deal with.
May 2, 2020
The sales process was friendly, informative, and very consultative. They worked hard to earn our business by taking a careful look around our home to assess our needs, providing a lot of information about the product, and answering all our questions and finding the right solution for our home at a competitive price. They prepared us very well for what to expect on installation day, and the installation went very smoothly - no surprises, all very professional! They gave us a call after installation to ensure we were happy with the work. We're very happy that we chose to work with TwinTech to get our new furnace.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,