Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Ignition Issues With Your Furnace
Posted On: October 11, 2024
If your furnace isn’t turning on or staying lit, it may be experiencing ignition problems. Ignition issues can be frustrating, especially during colder months when you rely on your heating system to function properly. Understanding the possible causes can help you identify and solve the problem before calling in a professional. Here's a guide to common furnace ignition issues and potential solutions.
Common Causes of Furnace Ignition Problems
-
Pilot Light Issues: Older furnaces typically use a pilot light for ignition. If the pilot light is out, the furnace won’t ignite. This can be due to a draft, a dirty pilot light, or a malfunctioning thermocouple.
Solution: If the pilot light is out, try relighting it according to the manufacturer’s instructions. If it won’t stay lit, check for drafts or clean the pilot light assembly. You may also need to replace the thermocouple, which detects whether the pilot light is on.
-
Faulty Ignition Sensor: For newer furnaces with electronic ignition, the ignition sensor can sometimes malfunction. Over time, dirt and grime can accumulate on the sensor, causing it to fail in detecting the flame.
Solution: Cleaning the ignition sensor often resolves this issue. Turn off the furnace, remove the sensor, clean it with fine sandpaper or a brush, and reinstall it.
-
Ignitor Failure: Furnaces equipped with hot surface ignitors rely on a small electrical component to create heat for ignition. If the ignitor fails, the furnace won’t start.
Solution: Ignitors can wear out over time, and a replacement is usually necessary. This part is fragile, so it's best to have a professional technician handle the replacement.
-
Gas Supply Issues: If your furnace isn't getting enough gas, it won’t ignite. This could be due to a closed gas valve, low gas pressure, or an issue with the gas line.
Solution: Ensure that the gas valve is open and check your home's gas supply. If the issue persists, contact your gas company or a technician to inspect the gas lines.
-
Dirty Burners: Over time, the burners in your furnace can become clogged with dust and debris. Dirty burners can prevent proper ignition and cause the furnace to operate inefficiently.
Solution: Cleaning the burners can restore normal operation. This task is often best left to a professional, as improper cleaning can damage the components.
-
Blocked Air Intake or Exhaust: Modern furnaces have a safety feature that prevents ignition if the air intake or exhaust vent is blocked. This is a safety precaution to avoid dangerous gases from building up.
Solution: Check that the vents are clear of obstructions like leaves, snow, or debris. Clearing these blockages should allow the furnace to ignite properly.
When to Call a Professional
While some furnace ignition issues can be resolved with basic troubleshooting, others require the expertise of an HVAC professional. If you're unsure or uncomfortable handling any components, it's best to contact a certified technician to ensure safety and proper repairs. Regular maintenance can also help prevent ignition problems, keeping your furnace running smoothly throughout the winter.
By addressing furnace ignition issues early, you can avoid more significant problems and ensure your home stays warm and comfortable.
[BACK]
See What Our Customers Are Saying:
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
May 11, 2020
We couldnt have been more impressed with Twintech - from our first service call with Mitch who took the time to thoroughly diagnose the issue with our furnace, to Dave who proposed a well thought out solution to meet our needs and finally Greg and team who acted quickly to install given we had no heat.
We did our due diligence by soliciting quotes from alternate providers and were shocked and disappointed by the aggressive and manipulative tactics used.
Twintech was honest in their approach, detailed in their product knowledge, reasonably priced, diligent in their follow-up and valued our business.
Well done Twintech! You made this a positive experience for us and our new furnace works beautifully!
May 10, 2020
We recently purchased an Amana high efficiency furnace and humdifier through Twintech. The work was completed very professionally and the quality of the workmanship was high. There was some additional sheet metal work required to complete the installation, which they were able to complete themselves. Overall I am very pleased with the work and would highly recommend Twintech for a furnace replacement.
May 9, 2020
We were very pleased with every aspect of the work that was done. They were very professional and polite. They arrived when they said they would and job was completed on estimated time
We would highly recommend them to whoever needed a recommendation
We have a very large dog and they were very understanding and respectful of him being around
May 8, 2020
The blower on our furnace stopped working leaving us with a cold house. Dave from TwinTech responded immediately to our HomeStars service request. From beginning to end Dave was nothing but helpful, friendly and professional, he did a great job of walking us through the quote and scope of work.
The replacement of the furnace went smoothly. The Guys did a great job, everyone was very friendly and polite. There were no hiccups, or unexpected costs. The only surprise was they left the work area cleaner than it was before they started.
Was a great experience with the whole TwinTech team. Its been a couple of months since the new furnace has been installed and its working great!
May 7, 2020
I heard about TwinTech when researching new furnaces at furnaceprices.ca. After contacting them about my broken down furnace, Dave came to my house the next day to assess my situation and requirements for a new furnace. He recommended one that had stainless steel heat exchangers which sold me since my previous furnace had issues with a rusted secondary heat exchanger that had to be replaced. Dave also set me up with an appointment with an energy audit company so that I could take advantage of a rebate to help improve the energy efficiency of my home and get some money back. A few days later, Greg, Grant, and Mitch came to install the new furnace and remove the old one. When delivering and removing the furnaces, they were very careful not to damage my floors and walls, and even laid out red carpeting to protect the floors. They were very friendly and professional. The installation was completed in the time they said it would take and they cleaned up their work areas. Within a week, Dave called to follow-up to see how everything was going. I have already recommended them to several friends and family members who may need new furnaces soon.
May 6, 2020
Twintech did a great job, from Dave the Sales Rep to the Office staff and The Professional Technicians who did the installation. They were professional, courteous, knowledgable and informative. From beginning to follow up we were completely satisfied with everything. Thanks Again. Sincerely The Laytons
May 5, 2020
Great product, great service, great follow-up. The Twintech Heating and Cooling arranged removal of my existing oil tank and they installed the new gas furnace Amana (made in USA). I am very happy with the final result and support I received throughout the process. My thanks go to the entire Twintech team for their professionalism, great communication and follow-up.
May 4, 2020
We've had Twintech provide us with work in the past, for an inground pool heater and required rough-in for a new gas stove. More recently they provided the same friendly, professional, timely and clean installation of our new furnace.
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,