[BACK]
Ignition Issues With Your Furnace
If your furnace isn’t turning on or staying lit, it may be experiencing ignition problems. Ignition issues can be frustrating, especially during colder months when you rely on your heating system to function properly. Understanding the possible causes can help you identify and solve the problem before calling in a professional. Here's a guide to common furnace ignition issues and potential solutions.
Pilot Light Issues: Older furnaces typically use a pilot light for ignition. If the pilot light is out, the furnace won’t ignite. This can be due to a draft, a dirty pilot light, or a malfunctioning thermocouple.
Solution: If the pilot light is out, try relighting it according to the manufacturer’s instructions. If it won’t stay lit, check for drafts or clean the pilot light assembly. You may also need to replace the thermocouple, which detects whether the pilot light is on.
Faulty Ignition Sensor: For newer furnaces with electronic ignition, the ignition sensor can sometimes malfunction. Over time, dirt and grime can accumulate on the sensor, causing it to fail in detecting the flame.
Solution: Cleaning the ignition sensor often resolves this issue. Turn off the furnace, remove the sensor, clean it with fine sandpaper or a brush, and reinstall it.
Ignitor Failure: Furnaces equipped with hot surface ignitors rely on a small electrical component to create heat for ignition. If the ignitor fails, the furnace won’t start.
Solution: Ignitors can wear out over time, and a replacement is usually necessary. This part is fragile, so it's best to have a professional technician handle the replacement.
Gas Supply Issues: If your furnace isn't getting enough gas, it won’t ignite. This could be due to a closed gas valve, low gas pressure, or an issue with the gas line.
Solution: Ensure that the gas valve is open and check your home's gas supply. If the issue persists, contact your gas company or a technician to inspect the gas lines.
Dirty Burners: Over time, the burners in your furnace can become clogged with dust and debris. Dirty burners can prevent proper ignition and cause the furnace to operate inefficiently.
Solution: Cleaning the burners can restore normal operation. This task is often best left to a professional, as improper cleaning can damage the components.
Blocked Air Intake or Exhaust: Modern furnaces have a safety feature that prevents ignition if the air intake or exhaust vent is blocked. This is a safety precaution to avoid dangerous gases from building up.
Solution: Check that the vents are clear of obstructions like leaves, snow, or debris. Clearing these blockages should allow the furnace to ignite properly.
While some furnace ignition issues can be resolved with basic troubleshooting, others require the expertise of an HVAC professional. If you're unsure or uncomfortable handling any components, it's best to contact a certified technician to ensure safety and proper repairs. Regular maintenance can also help prevent ignition problems, keeping your furnace running smoothly throughout the winter.
By addressing furnace ignition issues early, you can avoid more significant problems and ensure your home stays warm and comfortable.
Twintech promptly responded to request for quotation. They were thorough and helpful in explaining options. The quote was very competitive. Installation of new furnace was very professionally completed. Excellent work.
When our old oil furnace finally broke down we decided it was time to finally convert to natural gas and finally install central air conditioning at the same time. Knowing it was going to be a significant investment for us, we wanted to make the right choice. Twintech came highly recommended by a friend and we were not disappointed. From the first contact with the salesperson, until the final touches on the installation, we were so pleased with their service. Everyone from the company was so friendly, efficient and a pleasure to deal with. Best of all, the cost was very competitive. We would certainly recommend Twintech to anyone requiring HVAC work in their home.
Mitch from Twintech came out for our annual furnace inspection. We found him to be friendly, conscientious & he left the work area clean. We were also very impressed with the thoroughness of the job he did. This is the 2nd job weve had Twintech do for us & have been very happy with the results for each. We highly recommend this company. Thank you, Mitch, Dave & Greg.
Work was done on schedule, professionally, according to quote and with minimal inconvenience to building users. Very happy with the end result. The only area for improvement from my experience - need more timely quoting process.
The team was great! Very knowledgeable, professional and extremely helpful. A few days after install the unit didnt seem to be working, user error, but within minutes of contacting them..on a Saturday.. a tech was on the phone troubleshooting with us. I highly recommend Twintech for your cooling or heating needs. They stand by their products and a pleasure to deal with.
During the hottest week in the summer our old A/C decided to call it quits. I called Twintech Heating & Cooling after receiving a referral from a family member; came highly rated for being an honest, family-run business, who appreciates their customers. Dave was able to accommodate my hectic schedule and book a late evening appointment to walk through the specifics. Greg and Mitch arrived exactly on time a few days later, were very polite and friendly, and within a couple of hours had a new unit up and running. I also received a follow-up call to ensure we were happy with the Amana.
They were on time and very professional. I'm so glad I decided to go with Twintech, thanks!
Timely and appreciated - this was during the hottest days this year when our Air and Furnace way.
Efficient. Professional. No BS or overselling. What was promised, was delivered at a cost-effective price point.
Down to earth.
Professionally done and took care to cover all entry floors to the house for the installers to remove the old furnace and install a new furnace.
I also made recommendations of the tankless water heater that we had installed and items to address. We did not know they also installed tankless water heaters.
Price was not the cheapest nor the most expensive of my quotes. It's the quality of the installation that makes for a good AC system. The twins' knowledge & professionalism was evident in the small details:
Very clean work. Greg made sure that the refrigerant level & temperature were correct. They reinstall the insulation & vapor barrier around the wall. The outside electrical cords were secured to the wall. Proud to support this local company. Thank you.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Amazing experience with TwinTech Heating & Cooling! Their team was professional, knowledgeable, and efficient from start to finish. They installed my new furnace quickly and left everything spotless. The technicians took the time to explain everything and made sure I was comfortable with the system before they left. Great customer service and fair pricing. I highly recommend them for anyone needing HVAC services!
Great experience all around. Bob was sharp and easy to talk to, and Greg handled the installation perfectly. Would hire them again in a heartbeat.
If you suspect your air conditioner is miswired, it could lead to improper functioning, electrical issues, or potential damage. Here are some signs that your air conditioner might be miswired: 1. Unit Not Turning On Issue: If your air condit
Read MoreBuying a heat pump is a significant decision that can impact your home's comfort and energy efficiency. Here are key factors to consider before purchasing a heat pump: Climate and Region: Heat pumps are most effective in moderate
Read MoreMy Furnace has been giving me this issue for over 2 winters and Goodman cannot figure out the issue. This is a new system in a new house. The following is a history of work that has been done by contractors who have come out. There is a constant red
Read MoreThe lifespan of an air conditioning (AC) unit and how long it can run continuously without breaking depends on several factors, including the type and quality of the unit, how well it is maintained, the conditions in which it operates, and usage patt
Read More