[BACK]
Ignition Issues With Your Furnace
If your furnace isn’t turning on or staying lit, it may be experiencing ignition problems. Ignition issues can be frustrating, especially during colder months when you rely on your heating system to function properly. Understanding the possible causes can help you identify and solve the problem before calling in a professional. Here's a guide to common furnace ignition issues and potential solutions.
Pilot Light Issues: Older furnaces typically use a pilot light for ignition. If the pilot light is out, the furnace won’t ignite. This can be due to a draft, a dirty pilot light, or a malfunctioning thermocouple.
Solution: If the pilot light is out, try relighting it according to the manufacturer’s instructions. If it won’t stay lit, check for drafts or clean the pilot light assembly. You may also need to replace the thermocouple, which detects whether the pilot light is on.
Faulty Ignition Sensor: For newer furnaces with electronic ignition, the ignition sensor can sometimes malfunction. Over time, dirt and grime can accumulate on the sensor, causing it to fail in detecting the flame.
Solution: Cleaning the ignition sensor often resolves this issue. Turn off the furnace, remove the sensor, clean it with fine sandpaper or a brush, and reinstall it.
Ignitor Failure: Furnaces equipped with hot surface ignitors rely on a small electrical component to create heat for ignition. If the ignitor fails, the furnace won’t start.
Solution: Ignitors can wear out over time, and a replacement is usually necessary. This part is fragile, so it's best to have a professional technician handle the replacement.
Gas Supply Issues: If your furnace isn't getting enough gas, it won’t ignite. This could be due to a closed gas valve, low gas pressure, or an issue with the gas line.
Solution: Ensure that the gas valve is open and check your home's gas supply. If the issue persists, contact your gas company or a technician to inspect the gas lines.
Dirty Burners: Over time, the burners in your furnace can become clogged with dust and debris. Dirty burners can prevent proper ignition and cause the furnace to operate inefficiently.
Solution: Cleaning the burners can restore normal operation. This task is often best left to a professional, as improper cleaning can damage the components.
Blocked Air Intake or Exhaust: Modern furnaces have a safety feature that prevents ignition if the air intake or exhaust vent is blocked. This is a safety precaution to avoid dangerous gases from building up.
Solution: Check that the vents are clear of obstructions like leaves, snow, or debris. Clearing these blockages should allow the furnace to ignite properly.
While some furnace ignition issues can be resolved with basic troubleshooting, others require the expertise of an HVAC professional. If you're unsure or uncomfortable handling any components, it's best to contact a certified technician to ensure safety and proper repairs. Regular maintenance can also help prevent ignition problems, keeping your furnace running smoothly throughout the winter.
By addressing furnace ignition issues early, you can avoid more significant problems and ensure your home stays warm and comfortable.
I first met Greg and Grant (The Twin Brothers from Twin Tech - yup -it's not just a cool company name) back in 2014 when our furnace broke down and they installed our Carrier Furnace and AC that we purchased through Sears. I liked them instantly when I met them due to their friendly and professional service, and the fact that they didn't mind taking a little extra time to explain things in terms I could understand. Since that time they have reached out to me at least once a year to ensure that everything was running smoothly with my system and to keep me appraised of their evolving services. Due to this high level of proactive customer service I didn't hesitate to call and obtain their help for a Gas Stove removal and installation. When I scheduled the call Greg and Grant let me know that they would arrive the morning of the appliance delivery to disconnect the old gas stove, and then return in the afternoon to connect the new stove. Sure enough, they did just that as promised. Where they exceeded my expectations is with the extra level of support helping to assemble the burners and grills on the stove and in the oven. This may seem like a small thing to some but to my wife who was at home during this entire process it meant a stress free transition to the meal prep for the day. When I called home to ask about the install she commented that, "they left the place cleaner than it was when they arrived and they setup all the grills on top of the stove and in the oven... they didn't have to do all that -Wow!". You know what they say, Happy Wife, Happy Life. So in summary, I am recommending Twintech Heating & Cooling for all of your Furnace, Air Conditioning, and Gas Line needs. I've even called on these guys to help swap out a leaky water valve. They are just so easy to reach and communicate with by phone, and they don't mind a text message to confirm the details. You can rest easy when you have the Twins on your side as an extension of your household maintenance plan.
First thing, they actually showed up for a quote. Other big name companies in the area didn't even return my call , job was done as expected and new equipment is quiet and installed very clean and professional. Would highly recommend these guys.
They removed our old furnace and replaced it with a new furnace and AC system.
Work was performed in a clean and timely manner. The furnace and metal work was performed by the Twintech team (did not require separate contractor to do the metal work). Energy audit was arranged and promised rebates were received. The overall price was very competitive. We have recommended Twintech to several of our friends and family. Awesome job.
Grant and Greg installed a heating and AC system in our new Linwood post and beam home. Post and beam can be challenging structures for running ductwork and their high ceilings and open concept frequently frustrate efforts at balancing air flow and controlling temperatures. But these guys did it and did it right the first time. Even the building inspector was impressed with what he saw. More importantly, the boys brought a high degree of trust and integrity to the job. Something in short supply these days.
Very polite and professional. They removed my o
ld furnace and A/C and installed my new ones. They were efficient and thoroughly cleaned up when they were done! I would highly recommend them!
Pro from start to finish. They were able to fix my gas fireplace at very little cost as well.
Excellent installation very knowledgeable gentlemen! Would highly recommend them to all my friends for any hvac work !
I have used Twintech many times over the years. They always arrive quickly and get the issue fixed. The most recent incident was when my air conditioner broke last week I called Greg at 11:30am and he was at my home by 2:30pm he had the unit fixed by 3:30pm. Twintech are very reliable and honest and they are experts in the field. I have already recommended them to many of my friends. I would not use anyone but them for my heating and air conditioning issues.
I would highly recommend these guys, professional, fast and competitive pricing. I moved into this place with no working AC unit with a 8 month baby, he was able to come with in a week to fix even in the busy summer days. He really values his customers , I am already recommending to my neighbors.
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Amazing experience with TwinTech Heating & Cooling! Their team was professional, knowledgeable, and efficient from start to finish. They installed my new furnace quickly and left everything spotless. The technicians took the time to explain everything and made sure I was comfortable with the system before they left. Great customer service and fair pricing. I highly recommend them for anyone needing HVAC services!
Great experience all around. Bob was sharp and easy to talk to, and Greg handled the installation perfectly. Would hire them again in a heartbeat.
You may be running your air conditioner or your heating system. Whichever it is, you certainly expect to get a certain amount of airflow when you have your hands up to the vents. When that airflow level drops and the temperature in your home cha
Read MoreA furnace is essential for keeping your home warm and comfortable, especially during cold months. While regular maintenance can prevent many problems, certain furnace issues are too complex or dangerous for DIY repairs. Here are some serious furnace
Read MoreIf your furnace keeps turning off unexpectedly, it's a sign of an underlying issue that needs attention. Here are some common reasons for this problem: 1. Overheating A furnace may turn off if it's overheating due to a clogged air filte
Read MoreThese look like they got burned out (not sure the correct terminology) but the AC is blowing only hot air since. Any ideas why Also, circuit breaker is making buzzing noise when AC breaker is flipped on. Makes a buzzing noise every 5-10min but
Read More