Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Ignition Issues With Your Furnace
Posted On: October 11, 2024
If your furnace isn’t turning on or staying lit, it may be experiencing ignition problems. Ignition issues can be frustrating, especially during colder months when you rely on your heating system to function properly. Understanding the possible causes can help you identify and solve the problem before calling in a professional. Here's a guide to common furnace ignition issues and potential solutions.
Common Causes of Furnace Ignition Problems
-
Pilot Light Issues: Older furnaces typically use a pilot light for ignition. If the pilot light is out, the furnace won’t ignite. This can be due to a draft, a dirty pilot light, or a malfunctioning thermocouple.
Solution: If the pilot light is out, try relighting it according to the manufacturer’s instructions. If it won’t stay lit, check for drafts or clean the pilot light assembly. You may also need to replace the thermocouple, which detects whether the pilot light is on.
-
Faulty Ignition Sensor: For newer furnaces with electronic ignition, the ignition sensor can sometimes malfunction. Over time, dirt and grime can accumulate on the sensor, causing it to fail in detecting the flame.
Solution: Cleaning the ignition sensor often resolves this issue. Turn off the furnace, remove the sensor, clean it with fine sandpaper or a brush, and reinstall it.
-
Ignitor Failure: Furnaces equipped with hot surface ignitors rely on a small electrical component to create heat for ignition. If the ignitor fails, the furnace won’t start.
Solution: Ignitors can wear out over time, and a replacement is usually necessary. This part is fragile, so it's best to have a professional technician handle the replacement.
-
Gas Supply Issues: If your furnace isn't getting enough gas, it won’t ignite. This could be due to a closed gas valve, low gas pressure, or an issue with the gas line.
Solution: Ensure that the gas valve is open and check your home's gas supply. If the issue persists, contact your gas company or a technician to inspect the gas lines.
-
Dirty Burners: Over time, the burners in your furnace can become clogged with dust and debris. Dirty burners can prevent proper ignition and cause the furnace to operate inefficiently.
Solution: Cleaning the burners can restore normal operation. This task is often best left to a professional, as improper cleaning can damage the components.
-
Blocked Air Intake or Exhaust: Modern furnaces have a safety feature that prevents ignition if the air intake or exhaust vent is blocked. This is a safety precaution to avoid dangerous gases from building up.
Solution: Check that the vents are clear of obstructions like leaves, snow, or debris. Clearing these blockages should allow the furnace to ignite properly.
When to Call a Professional
While some furnace ignition issues can be resolved with basic troubleshooting, others require the expertise of an HVAC professional. If you're unsure or uncomfortable handling any components, it's best to contact a certified technician to ensure safety and proper repairs. Regular maintenance can also help prevent ignition problems, keeping your furnace running smoothly throughout the winter.
By addressing furnace ignition issues early, you can avoid more significant problems and ensure your home stays warm and comfortable.
[BACK]
See What Our Customers Are Saying:
Jul 2, 2017
Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!
Jun 29, 2017
Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.
Jun 28, 2017
Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.
Jun 28, 2017
We had Grant and Greg Dainty quote to replace our 20 yr old furnace. I have known them for years and have had other jobs done by them ( AC and Pool Htr). The price was very reasonable and the job was completed in one day.
Jun 23, 2017
TwinTech was the right choice. Our consultation with Dave set the tone. Professional and knowledgeable, we even received a follow-up call within hours of our install completion, wow! TwinTech arrived as scheduled to install our A/C unit. Within minutes of arrival Greg noted and explained a few out of code faults on our furnace installed by another company, problems fixed, thanks TwinTech. Greg, Grant and "Subaru" Pete were meticulous start to finish. Highly recommended!
Jun 13, 2017
Twintech replaced our aging +20 yrs old Furnace & AC with the variable high efficiency Napoleon Furnace matched with the Goodman AC. Sales guy ,Dave was great, gave a no pressure estimate, explained about the Government Rebate program which they took care of completely including arranging the home energy audit. On the scheduled day Greg and his team arrived on time, did a great job and completed the same day , extremely professional and courteous, cleaned up everything , tested the system, Greg took his time to explain the setup. Very impressed with the Napoleon Furnace 9600 which did a great job in maintaining a comfortable temperature last winter and now with the hot weather the Goodman AC cooled the house in much less time than the old AC unit could ever. From start to finish Twintech were great and have no hesitation in recommending them 100%.
Jun 13, 2017
The Twintech team did an excellent job installing our new Goodman air conditioner. They were polite and professional. Greg was knowledgeable and clearly experienced. Thank you Twintech for bringing our cooling system up to current regulations. Job well done!
Jun 11, 2017
Dave from TwinTech was very knowledgeable, professional and thorough in the buying process. He helped us to identify the best furnace for our home and our budget. When we needed a new filter a year later and seemed to have a problem finding the right one, I called Dave up and he delivered a filter to me the next day! The cost was on par with other retailers, but it was this unexpected personal service that really was impressive. The furnace? Works like a charm.
May 27, 2017
Imagine, it's 5 minutes after the midnight countdown New Year's eve and the furnace quits. We called TwinTech fully expecting to leave a message and actually spoke with Greg, one of the owners! We had an immediate repair early the next morning & a new furnace within the week. We have entrusted TwinTech with all our home HVAC service needs for over 6 years. That's why this week with an opportunity to purchase a new BBQ, we called them 1st to see about a gas line install. It's chicken on the grill tonight! They are efficient, reliable, honest, hard working, and -- attentive is an understatement.
Jan 19, 2016
Wonderful customer service, starting from the job quote (Dave), to the clean install, to the follow-up. Twintech is a small company which installed my Napoleon furnace, A/C, John Wood tank, and ran the line for my gas dryer. The installation was completed as promised in one day. The work area was kept very clean, and they even took care of my old rental tank. The professionalism and wonderful customer service is second to none. They completed all of my rebate paperwork, and now I'm getting $2000 back! You will not be disappointed if you hire this company for your project.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,