$49 / month O.A.C Including Install
$49 / month O.A.C Including Install

A Simple Guide to Furnace Ignition Failure

24 / 7 Emergency Service Available. Call Us Now: 1.844.894.6832


[BACK]
A Simple Guide to Furnace Ignition Failure

Posted On: November 4, 2024

A Simple Guide to Furnace Ignition Failure

Here’s a straightforward guide to help you troubleshoot furnace ignition failure, a common issue that can lead to a cold house in the winter. Furnace ignition failure can have multiple causes, and identifying them early can save time, energy, and repair costs.


1. Check the Thermostat

  • Ensure it’s set to “Heat”: The thermostat should be set to “heat” and at a temperature higher than the current room temperature.
  • Inspect the Batteries: Some thermostats use batteries, so replace them if necessary. This could resolve the issue without further troubleshooting.

2. Inspect the Air Filter

  • Replace Dirty Filters: A dirty air filter can restrict airflow, causing the furnace to overheat and shut down as a safety precaution. A fresh filter can allow your furnace to work efficiently and prevent ignition issues.

3. Look for Power Issues

  • Circuit Breaker: Check the furnace’s circuit breaker in your electrical panel. If it’s tripped, reset it once. If it trips again, you may have a larger electrical issue that requires a professional.
  • Furnace Switch: Make sure the power switch, which usually looks like a light switch near the furnace, is in the “on” position.

4. Verify Gas Supply

  • Gas Valve: If you have a gas furnace, check that the gas valve near the furnace is open. The lever should be parallel to the gas line when it’s open.
  • Gas Line and Supply: Sometimes, the gas company may have shut off the supply for maintenance. If you suspect an issue with gas flow, contact your gas provider.

5. Inspect the Igniter

  • Hot Surface Igniter: Many modern furnaces use an electric igniter, which can fail over time. A visible crack or wear on the igniter usually indicates it needs replacement. This repair often requires professional assistance.
  • Pilot Light: For furnaces with a pilot light, check that it’s lit. If not, relight it if you feel comfortable, or call a technician if you have trouble with it.

6. Examine the Flame Sensor

  • Clean the Flame Sensor: Over time, the flame sensor can become dirty, which prevents it from sensing the flame. Use a fine-grit sandpaper or a cloth to gently clean the sensor. This can often restore normal furnace function.

7. Check for Error Codes

  • Error Lights: Most modern furnaces have a diagnostic light that flashes in a particular pattern if there’s an issue. Refer to the furnace manual to interpret these error codes, which can help pinpoint the problem.

8. Assess the Blower Motor and Vents

  • Vent Blockages: Ensure nothing blocks air vents and ducts. Restricted airflow can also cause safety switches to trigger.
  • Blower Motor Reset: Some furnaces have a reset button on the blower motor. Press this if your furnace isn’t responding.

When to Call a Professional

If these steps don’t resolve the issue, it’s best to contact a licensed HVAC technician. Attempting to fix more complex problems on your own can be unsafe and may lead to further damage.


Following these steps can often solve simple ignition issues and get your furnace running smoothly again!



[BACK]

See What Our Customers Are Saying:

by Peter, Pickering on Twintech Heating and Cooling

On coldest night of the year our furnace quit. At 8:40 in the morning Greg arrived and gave us a diagnosis and a recommendation. By 2:30 we had a new furnace and were warm again. Great company. Great customer service. Good reasonable price.

Peter, Pickering

by New Furnace Installed on Twintech Heating and Cooling

Twin tech team was very efficient and prompt. They provided a quote within hours of request and got the job done on time. No disruption to home function. We would highly recommend this team. Job well done.

by John from Toronto on Twintech Heating and Cooling

Our furnace bit the dust, and Twintech came out to troubleshoot and diagnose the problem within a couple of hours. Mitch was super helpful, patient, and answered all of our questions. When we decided to get the furnace replaced, the crew was over first thing the next morning and did a fantastic job. Not only did they complete the job in a few hours, but they cleaned up and respected our house as they went, and answered all of our follow-up questions. I've used Twintech for our HVAC needs in the past and will continue to do so. I'd recommend them to anyone, and it feels good to support a local, family-owned business.

by Ryan k on Twintech Heating and Cooling

Dave and the Twintech team were fabulous from day 1 and helped us through the process to identifying a new furnace and AC unit. This was our first time through this process and Dave did a thorough job explaining all the components and was very patience answering all our questions. Dave provided great insights and fair pricing.

The Twintech team did an awesome installation. Very clean and efficient. I would highly recommended their service.

by Louise in Scarborough on Twintech Heating and Cooling

We had a new Amana furnace installed by Twintech and we were very pleased with the installation. It is nice to have a warm house again.

by Private User on Twintech Heating and Cooling

Excellent job. Excellent service. Competitive price. Its rare to find a company with the knowledge and professional results we have experienced with Twintech. The clean and neat installation with attention to detail and drop sheers to respect our property is a clear indication of Twintechs high level of integrity. The 1-1/2 gas line upgrade they did for our pool 3 years ago was awesome. Can't say enough. Thank-you Twintech.

by Private User on Twintech Heating and Cooling

Twitch did a great job with the installation of our new furnace. I really appreciated their honesty and I could trust what they were telling me. Another company tried to suggest significantly more work at a greater cost claiming it was necessary to meet current building code. Twintech is very fair. All staff I meet were friendly, polite and trustworthy. I would recommend Twitch for a furnace.

by Private User on Twintech Heating and Cooling

This is a professional team that's easy to deal with. I would strongly recommend them

by hj.taggart in OSHAWA on Twintech Heating and Cooling

Very professional firm from start to finish!
They removed the old oil tank and furnace. They installed air conditioning and a new propane furnace.
Professional installation, on time and no mess.
Very pleased with their work and would highly recommend the company. Our house is three stories so they spent the time to do all the calculations to make sure we would have great performance on each floor.
Thank you again!

by susieschoeppler in Oshawa on Twintech Heating and Cooling

Upon a routine yearly maintenance, it was discovered there was a leak in the heat exchanger and a I needed a new furnace. I know nothing about these things and was completely stressed out. The company I had the maintenance plan with quoted me a huge number to rent a furnace, I just wanted to cry. Then I spoke to Dave at Twintech. He was so knowledgeable and calming, provided me a fair quote and within a few days I had an amazing crew show up to my house and install my new energy efficient furnace! I have already recommended these wonderful people at Twintech to a good friend of mine. Thank you Twintech!!

Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,


See What Our Customers Are Saying:

by Aaron on Twintech Heating and Cooling

We are very happy to recommend this company to everyone. Our furnace broke down on Sunday morning. We phoned them and before noon Grant the owner showed up. He worked on the furnace for about a hour not wanting to give up to fix the problem. The furnace was 17 years old. I was the one talking about replacing it. End result was the next day it was all done. On the Sunday Bob came over with heaters to warm up the house. We decided to replace the water heater at the same time. Thanks Grant for the excellent work. Thumbs up.

by Linda on Twintech Heating and Cooling

Right on time. Explained how to work the HRV in a different way so the house would not be so dry. Changed my whole house water filter for me as well. Friendly, helpful, caring service!

by Robert Rogers on Twintech Heating and Cooling

Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.

by Robert Mizuno on Twintech Heating and Cooling

We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!

by Ruth on Twintech Heating and Cooling

TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!

Do Furnaces Need to be Maintained?

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - February 8, 2024

Yes, furnaces do require regular maintenance to ensure they operate efficiently, safely, and reliably. Routine maintenance helps prevent breakdowns, extends the lifespan of the furnace, and ensures it operates at peak performance. Here are some

Read More

Why Does My A/C Unit Keep Freezing?

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - April 4, 2023

Question from user Topher1326 at AirConditioners at reddit. Answer: If your A/C unit keeps freezing, there are a few possible reasons why this may be happening: Dirty air filter: A dirty air filter can restrict airflow over the evaporator co

Read More

4 Safety Tips To Keep in Mind When Using a Space Heater

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - February 15, 2019

Modern homeowners are constantly looking for thrifty ways to make their homes more comfortable; especially in the cold winter months like January and February. Many of these homeowners have learned that space heaters are great tools for efficien

Read More

My AC is Not Blowing Cold Air

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - May 7, 2024

There could be several reasons why your air conditioner isn't blowing cold air. Here are a few common issues and troubleshooting steps: Thermostat Settings: Make sure your thermostat is set to "cool" mode and the temperature is

Read More