When you are looking around for a new furnace, you will come across three different types: single-stage, two-stage and modulating. You may probably ask, what are the differences between them, and which one is right for your home?
In this article, we will explain the differences between them and help you decide which furnace works best for you and your family.
Single-stage furnaces only have one setting, which is high heat. On a call for heat, they immediately start running at full capacity, no matter what the temperature is outside until the signal coming from the thermostat is turned off. These types of furnaces are best suited for budget-conscious consumers, so in the long run, the upfront cost savings are not realized.
A two-stage gas furnace has two settings, high fire and low fire, and here is how it works. Most of the time, on a typical heating cycle the furnace will start out running on low fire, consuming less gas and electricity, while at the same time providing heat and gaining inefficiency. After approximately 7- 10 minutes of operation, the furnace begins to operate very efficiently because it is fully warmed up. Then, it will jump up into high fire and finish out the heating cycle at full capacity. Control of the high and low burner timing are made by the installers, as part of a new furnace installation.
You could also control the 2 stage burner by using a 2 stage thermostat, the effect of either is similar. Two-stage furnaces are considered more energy-efficient than single-stage because they are not always running at a full heating capacity of the appliance and are often equipped with an ECM blower motor which will also save on your electricity costs.
Modulating gas furnaces are at the top end of the gas furnace spectrum and are considered to be the most energy-efficient of the three. But, at an added price over two-stage or single-stage furnaces. Heating from a modulating furnace ramps up in increments to maintain a consistent temperature and the ductwork is always warmed up so there is a little efficiency lost during the warming up process.
When buying a modulating furnace you will almost always need to invest in a new thermostat controller specifically designed for this type of furnace in order to get the most out of it. Always ask your salesman about this option, as it is often not mentioned (due to the added cost of the new thermostat). If you are planning to stay in your home for the long-term, a modulating gas furnace may be the right fit for you.
When you want to buy a new furnace, you should always consult your local HVAC experts before making a decision. A trained HVAC technician can come to your home, go over your situation with you and help you decide which furnace best suits your home.
When you are ready for a new furnace, contact the Twintech experts! Our technicians are experienced and knowledgeable in all types of furnaces and HVAC systems.
For more information about our services, visit our website or give us a call at 1-844-894-6832. Contact Twintech today!
Great product, great service, great follow-up. The Twintech Heating and Cooling arranged removal of my existing oil tank and they installed the new gas furnace Amana (made in USA). I am very happy with the final result and support I received throughout the process. My thanks go to the entire Twintech team for their professionalism, great communication and follow-up.
We've had Twintech provide us with work in the past, for an inground pool heater and required rough-in for a new gas stove. More recently they provided the same friendly, professional, timely and clean installation of our new furnace.
Reasonable price and the workmanship was prompt and timely and the employees were great to deal with.
The sales process was friendly, informative, and very consultative. They worked hard to earn our business by taking a careful look around our home to assess our needs, providing a lot of information about the product, and answering all our questions and finding the right solution for our home at a competitive price. They prepared us very well for what to expect on installation day, and the installation went very smoothly - no surprises, all very professional! They gave us a call after installation to ensure we were happy with the work. We're very happy that we chose to work with TwinTech to get our new furnace.
Twintech promptly responded to request for quotation. They were thorough and helpful in explaining options. The quote was very competitive. Installation of new furnace was very professionally completed. Excellent work.
When our old oil furnace finally broke down we decided it was time to finally convert to natural gas and finally install central air conditioning at the same time. Knowing it was going to be a significant investment for us, we wanted to make the right choice. Twintech came highly recommended by a friend and we were not disappointed. From the first contact with the salesperson, until the final touches on the installation, we were so pleased with their service. Everyone from the company was so friendly, efficient and a pleasure to deal with. Best of all, the cost was very competitive. We would certainly recommend Twintech to anyone requiring HVAC work in their home.
Mitch from Twintech came out for our annual furnace inspection. We found him to be friendly, conscientious & he left the work area clean. We were also very impressed with the thoroughness of the job he did. This is the 2nd job weve had Twintech do for us & have been very happy with the results for each. We highly recommend this company. Thank you, Mitch, Dave & Greg.
Work was done on schedule, professionally, according to quote and with minimal inconvenience to building users. Very happy with the end result. The only area for improvement from my experience - need more timely quoting process.
The team was great! Very knowledgeable, professional and extremely helpful. A few days after install the unit didnt seem to be working, user error, but within minutes of contacting them..on a Saturday.. a tech was on the phone troubleshooting with us. I highly recommend Twintech for your cooling or heating needs. They stand by their products and a pleasure to deal with.
During the hottest week in the summer our old A/C decided to call it quits. I called Twintech Heating & Cooling after receiving a referral from a family member; came highly rated for being an honest, family-run business, who appreciates their customers. Dave was able to accommodate my hectic schedule and book a late evening appointment to walk through the specifics. Greg and Mitch arrived exactly on time a few days later, were very polite and friendly, and within a couple of hours had a new unit up and running. I also received a follow-up call to ensure we were happy with the Amana.