24 / 7 Emergency Service Available. Call Us Now: 1.844.894.6832

Durham Region Air Conditioning Repair, Service and Installation

CLICK HERE FOR A FREE QUOTATION

If you're looking for help fixing your coleman furnace, look no further! Our comprehensive coleman furnace repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.


CODE: Slow green flashing.
RESULT: Coleman furnace is operating normally.
FIX: N/A.

CODE: Slow amber flashing.
RESULT: Normal operation with a call for heat.
FIX: N/A.

CODE: Steady on red.
RESULT: There's a control failure.
FIX: Check Control Unit.

CODE: Rapid red flashing.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.

CODE: Rapid amber flashing.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.

CODE: One red flash.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.

CODE: Two red flashes.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.

CODE: Three red flashes.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.

CODE: Four red flashes.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.

CODE: Five red flashes.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.

CODE: Six red flashes.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.

CODE: Seven red flashes.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.

CODE: Eight red flashes.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.

CODE: Nine red flashes.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.

CODE: Ten red flashes.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.


See What Our Customers Are Saying:

by Brent L on Twintech Heating and Cooling

Work was done on schedule, professionally, according to quote and with minimal inconvenience to building users. Very happy with the end result. The only area for improvement from my experience - need more timely quoting process.

by Karen on Twintech Heating and Cooling

The team was great! Very knowledgeable, professional and extremely helpful. A few days after install the unit didn’t seem to be working, user error, but within minutes of contacting them..on a Saturday.. a tech was on the phone troubleshooting with us. I highly recommend Twintech for your cooling or heating needs. They stand by their products and a pleasure to deal with.

by Rob on Twintech Heating and Cooling

During the hottest week in the summer our old A/C decided to call it quits. I called Twintech Heating & Cooling after receiving a referral from a family member; came highly rated for being an honest, family-run business, who appreciates their customers. Dave was able to accommodate my hectic schedule and book a late evening appointment to walk through the specifics. Greg and Mitch arrived exactly on time a few days later, were very polite and friendly, and within a couple of hours had a new unit up and running. I also received a follow-up call to ensure we were happy with the Amana.

by Linda Robinson on Twintech Heating and Cooling

They were on time and very professional. I'm so glad I decided to go with Twintech, thanks!

by Famcam1953 on Twintech Heating and Cooling

Timely and appreciated - this was during the hottest days this year when our Air and Furnace way.
Efficient. Professional. No BS or overselling. What was promised, was delivered at a cost-effective price point.
Down to earth.

by DG Sellers on Twintech Heating and Cooling

Professionally done and took care to cover all entry floors to the house for the installers to remove the old furnace and install a new furnace.
I also made recommendations of the tankless water heater that we had installed and items to address. We did not know they also installed tankless water heaters.

by Bill, Pickering on Twintech Heating and Cooling

Price was not the cheapest nor the most expensive of my quotes. It's the quality of the installation that makes for a good AC system. The twins' knowledge & professionalism was evident in the small details:
Very clean work. Greg made sure that the refrigerant level & temperature were correct. They reinstall the insulation & vapor barrier around the wall. The outside electrical cords were secured to the wall. Proud to support this local company. Thank you.

by Taz on Twintech Heating and Cooling

Great team of guys came to do the work. Very professional. Arrived on time worked very efficiently and were very clean. They answered any questions we had without hesitation. The air conditioner works great and is so quiet. I highly recommend them and they don't try to up-sell anything right from the start.

by Jordan on Twintech Heating and Cooling

The service was prompt, professional and very courteous. Competitive price. Would highly recommend this company.

by David on Twintech Heating and Cooling

Excellent workmanship, and quick response. Would recommend Twintech to anyone.