Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your Continental Air Conditioner, look no further! Our comprehensive Continental Air Conditioner repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
13, 14 & 16 SEER SPLIT SYSTEM AIR CONDITIONER
CODE: Unit will not operate.
RESULT: Power disconnected or loose connection.
FIX: Check voltage at contactor.
RESULT: Power disconnected or loose connection.
FIX: Check voltage at contactor.
CODE: Unit will not operate.
RESULT: Blown fuse / breaker tripped.
FIX: Replace fuses / reset breaker.
RESULT: Blown fuse / breaker tripped.
FIX: Replace fuses / reset breaker.
CODE: Unit will not operate.
RESULT: Thermostat out of calibration is set too high.
FIX: Reset.
RESULT: Thermostat out of calibration is set too high.
FIX: Reset.
CODE: Unit will not operate.
RESULT: Contactor defective.
FIX: Check for 24VAC at contactor coil, replace if open.
RESULT: Contactor defective.
FIX: Check for 24VAC at contactor coil, replace if open.
CODE: Unit will not operate.
RESULT: Transformer defective.
FIX: Check wiring - replace transformer.
RESULT: Transformer defective.
FIX: Check wiring - replace transformer.
CODE: Unit will not operate.
RESULT: High pressure control open (if provided).
FIX: Reset - see high pressure connection.
RESULT: High pressure control open (if provided).
FIX: Reset - see high pressure connection.
CODE: Outdoor fan on. Compressor off.
RESULT: Run or start capacitor defective.
FIX: Replace.
RESULT: Run or start capacitor defective.
FIX: Replace.
CODE: Outdoor fan on. Compressor off.
RESULT: Start relay defective.
FIX: Replace.
RESULT: Start relay defective.
FIX: Replace.
CODE: Outdoor fan on. Compressor off.
RESULT: Loose wire.
FIX: Check for correct voltage at compressor - check and tighten all connections.
RESULT: Loose wire.
FIX: Check for correct voltage at compressor - check and tighten all connections.
CODE: Outdoor fan on. Compressor off.
RESULT: Compressor stuck, grounded or open motor winding, open internal overload.
FIX: Wait at least 2 hours for overload to reset; if still open, replace the compressor.
RESULT: Compressor stuck, grounded or open motor winding, open internal overload.
FIX: Wait at least 2 hours for overload to reset; if still open, replace the compressor.
CODE: Too little cooling.
RESULT: Low voltage condition.
FIX: Add start kit components.
RESULT: Low voltage condition.
FIX: Add start kit components.
CODE: Too little cooling.
RESULT: Improperly sized unit.
FIX: Recalculate load.
RESULT: Improperly sized unit.
FIX: Recalculate load.
CODE: Too little cooling.
RESULT: Improper indoor airflow.
FIX: Check-should be approximately 400 CFM per ton.
RESULT: Improper indoor airflow.
FIX: Check-should be approximately 400 CFM per ton.
CODE: Too little cooling.
RESULT: Incorrect refrigerant charge.
FIX: Charge per procedure in installation manual.
RESULT: Incorrect refrigerant charge.
FIX: Charge per procedure in installation manual.
CODE: Too little cooling.
RESULT: Air, non-condensables or moisture in system.
FIX: Recover refrigerant.
RESULT: Air, non-condensables or moisture in system.
FIX: Recover refrigerant.
CODE: Compressor operates in short cycles.
RESULT: Incorrect voltage.
FIX: At compressor terminals, voltage must be +/10% of nameplate marking when unit is operating.
RESULT: Incorrect voltage.
FIX: At compressor terminals, voltage must be +/10% of nameplate marking when unit is operating.
CODE: Compressor operates in short cycles.
RESULT: Defective overload protector.
FIX: Replace - check for correct voltage.
RESULT: Defective overload protector.
FIX: Replace - check for correct voltage.
CODE: Compressor operates in short cycles.
RESULT: Refrigerant undercharge.
FIX: Add refrigerant.
RESULT: Refrigerant undercharge.
FIX: Add refrigerant.
CODE: High head pressure; Low suction pressure.
RESULT: Restriction in liquid line, expansion device or filter drier.
FIX: Remove or replace defective component.
RESULT: Restriction in liquid line, expansion device or filter drier.
FIX: Remove or replace defective component.
CODE: High head pressure; Low suction pressure.
RESULT: Lack of sufficient indoor airflow.
FIX: Clean/check filters, registers, or evaporator coil that may cause a restriction.
RESULT: Lack of sufficient indoor airflow.
FIX: Clean/check filters, registers, or evaporator coil that may cause a restriction.
CODE: High head pressure; Normal suction pressure.
RESULT: Dirty outdoor coil.
FIX: Clean coil.
RESULT: Dirty outdoor coil.
FIX: Clean coil.
CODE: High head pressure; Normal suction pressure.
RESULT: Refrigerant overcharge.
FIX: Correct system charge.
RESULT: Refrigerant overcharge.
FIX: Correct system charge.
CODE: High head pressure; Normal suction pressure.
RESULT: Outdoor fan not running.
FIX: Repair or replace.
RESULT: Outdoor fan not running.
FIX: Repair or replace.
CODE: High head pressure; Normal suction pressure.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
CODE: Low head pressure; High suction pressure.
RESULT: Expansion device stuck in open position Replace expansion device.
FIX: Defective compressor valves Replace compressor.
RESULT: Expansion device stuck in open position Replace expansion device.
FIX: Defective compressor valves Replace compressor.
See What Our Customers Are Saying:
Feb 1, 2021
Dave was very pleasant to deal with and Twintech responded quickly when our furnace needed to be replaced ASAP. Installation was done on time and the crew were neat and tidy. We now have a great furnace that suits the needs of our family.
Feb 1, 2021
When your furnace kicks in over the holidays and you're not sure where to turn.. I'm so thankful that this company returned my phone call. I appreciated their transparency and clarity which allowed me to make an informed decision. With various quotes thrown at you, it can be difficult to make the right decision and trust the solutions offered by different companies. TwinTech spoke the truth and delivered on their word. Neat, timely and clean service; the peace of mind I needed during a very cold holiday season. I highly recommend them!
Feb 1, 2021
Pulling a old unit out and installing a modern heating system! Required drilling holes in the wall for the newer pipes. We went from 70% (I am willing to bet it was far less due to lack of maintenance and just old) to 96% newer . It now feels warmer and more pressure and we use to run extra heaters and feel as though they are not necessary!
Feb 1, 2021
I received three quotes before deciding to choose Twintech. Dave's prices was much more reasonable than the competitors. I most appreciated their honest recommendations. Others tried to oversell their products and services. Thank you Dave!
Feb 1, 2021
They had the best price and did a great job on the installation. Recommend them to anyone.
Feb 1, 2021
It was a amazing and professional high quality job
Friendly and very helpful representatives
Thank you for understanding my concern
And explain very well
Overall we pleased with your service
Tanks
May 15, 2020
My 19 year old furnace stopped working when the cold weather hit in November, and I was left without heat. I interviewed several companies and found TWINTECH HEATING and COOLING to be very knowledgeable, quick to respond to my inquiries and very competitively priced.
Dave provided all of the information and pricing ahead of time and set up the appointment for the installation. Greg and Mitch arrived on time to do the installation and worked quickly and efficiently to complete the job.
After the completion of the installation, Dave followed up to ensure that everything was working well and that I didn't have any concerns.
Overall, this was a low-stress and flawless experience from start to finish. I would highly recommend TWINTECH HEATING and COOLING to anyone that requires a new furnace.
May 14, 2020
Our 20 year old furnace broke down during the first cold weekend this past November and our usual HVAC company never returned our phone call. Their loss, missing out on a sale since we didn't want to spend much fixing an old furnace and our 40 year old air conditioner was also long overdue for replacement. We proceeded in obtaining three different quotes for furnace and air conditioner replacement, and proceeded with the one we received from Twintech.
Dave was friendly, knowledgable and accommodating to our schedule and provided with us with a price that fell in the middle of the three quotes that we had. We felt that the Amana furnace and air conditioner he quoted us on were the best products and value offered to us and felt most comfortable with the professionalism and reputation of Twintech.
Greg, Grant and Mitch were at our house for installation the day after we decided to proceed. The guys were friendly and informative, the job was completed efficiently and workmanship appears excellent. Our house is certainly much more comfortable with the new two-stage variable speed Amana furnace compared to the old clunker! And, we're looking forward to enjoying the new air conditioner once summer rolls around again. Thanks Twintech!
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
See What Our Customers Are Saying:
Feb 18, 2025
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
Feb 18, 2025
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
Feb 18, 2025
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Feb 18, 2025
Amazing experience with TwinTech Heating & Cooling! Their team was professional, knowledgeable, and efficient from start to finish. They installed my new furnace quickly and left everything spotless. The technicians took the time to explain everything and made sure I was comfortable with the system before they left. Great customer service and fair pricing. I highly recommend them for anyone needing HVAC services!
Feb 18, 2025
Great experience all around. Bob was sharp and easy to talk to, and Greg handled the installation perfectly. Would hire them again in a heartbeat.
Is My Furnace Unit Dangerous?
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - September 14, 2024
A furnace unit can be dangerous if it's not properly maintained or if it's malfunctioning. Here are some key signs and potential dangers to be aware of: 1. Carbon Monoxide Leaks Signs: Yellow or flickering burner flame instead of a s
Read MoreWhy you should choose a career in HVAC
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - February 16, 2022
It can be hard to choose a career, especially if you are young or looking for a new path in life. And if you're one of those people who likes to know how things work instead of being in an office all day, why not consider a career in HVACHVAC, which
Read MoreDoes a Heat Pump Work Well With my Furnace?
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - February 16, 2024
Yes, a heat pump can work well with a furnace, especially in regions with moderate climates where both heating and cooling are needed throughout the year. This setup is often referred to as a dual-fuel or hybrid heating system. Here's how it t
Read MoreWhy Isnt My AC Unit Turning On?
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - May 17, 2024
If your AC unit isn't turning on, there could be several reasons, ranging from simple issues that you can fix yourself to more complex problems requiring a professional technician. Here are some common causes and potential solutions: Basic Che
Read More