Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your napoleon air conditioner, look no further! Our comprehensive napoleon air conditioner repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
PROBLEM: Unit will not operate,
RESULT: Power disconnected or loose connection.
FIX: Check power supply to unit. Check voltage at contactor.
RESULT: Power disconnected or loose connection.
FIX: Check power supply to unit. Check voltage at contactor.
PROBLEM: Unit will not operate,
RESULT: Blown fuse / breaker tripped.
FIX: Replace fuses/reset breaker.
RESULT: Blown fuse / breaker tripped.
FIX: Replace fuses/reset breaker.
PROBLEM: Unit will not operate,
RESULT: Thermostat out of calibration is set too high.
FIX: Reset.
RESULT: Thermostat out of calibration is set too high.
FIX: Reset.
PROBLEM: Unit will not operate,
RESULT: Contactor defective.
FIX: Check for 24VAC at contactor coil - replace if open.
RESULT: Contactor defective.
FIX: Check for 24VAC at contactor coil - replace if open.
PROBLEM: Unit will not operate,
RESULT: Transformer defective.
FIX: Check wiring - replace transformer.
RESULT: Transformer defective.
FIX: Check wiring - replace transformer.
PROBLEM: Unit will not operate,
RESULT: High pressure control open (if provided).
FIX: Reset - see high pressure connection.
RESULT: High pressure control open (if provided).
FIX: Reset - see high pressure connection.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Run or start capacitor defective.
FIX: Replace.
RESULT: Run or start capacitor defective.
FIX: Replace.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Start relay defective.
FIX: Replace.
RESULT: Start relay defective.
FIX: Replace.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Loose wire.
FIX: Check for correct voltage at compressor - check and tighten all connections.
RESULT: Loose wire.
FIX: Check for correct voltage at compressor - check and tighten all connections.
PROBLEM: Outdoor fan on; Compressor off.
RESULT: Compressor stuck, grounded or open motor winding, open internal overload.
FIX: Wait at least 2 hours for overload to reset; if still open, replace the compressor.
RESULT: Compressor stuck, grounded or open motor winding, open internal overload.
FIX: Wait at least 2 hours for overload to reset; if still open, replace the compressor.
PROBLEM: Too little cooling.
RESULT: Low voltage condition.
FIX: Add start kit components.
RESULT: Low voltage condition.
FIX: Add start kit components.
PROBLEM: Too little cooling.
RESULT: Improperly sized unit.
FIX: Recalculate load.
RESULT: Improperly sized unit.
FIX: Recalculate load.
PROBLEM: Too little cooling.
RESULT: Improper indoor airflow.
FIX: Check-should be approximately 400 CFM per ton.
RESULT: Improper indoor airflow.
FIX: Check-should be approximately 400 CFM per ton.
PROBLEM: Too little cooling.
RESULT: Incorrect refrigerant charge.
FIX: Charge per procedure in installation manual.
RESULT: Incorrect refrigerant charge.
FIX: Charge per procedure in installation manual.
PROBLEM: Too little cooling.
RESULT: Air, non-condensables or moisture in system.
FIX: Recover refrigerant.
RESULT: Air, non-condensables or moisture in system.
FIX: Recover refrigerant.
PROBLEM: Compressor operates in short cycles.
RESULT: Incorrect voltage.
FIX: At compressor terminals, voltage must be +/10% of nameplate marking when unit is operating.
RESULT: Incorrect voltage.
FIX: At compressor terminals, voltage must be +/10% of nameplate marking when unit is operating.
PROBLEM: Compressor operates in short cycles.
RESULT: Defective overload protector.
FIX: Replace - check for correct voltage.
RESULT: Defective overload protector.
FIX: Replace - check for correct voltage.
PROBLEM: Compressor operates in short cycles.
RESULT: Refrigerant undercharge.
FIX: Add refrigerant.
RESULT: Refrigerant undercharge.
FIX: Add refrigerant.
PROBLEM: High head pressure; Low suction pressure.
RESULT: Restriction in liquid line, expansion device or filter drier.
FIX: Remove or replace defective component.
RESULT: Restriction in liquid line, expansion device or filter drier.
FIX: Remove or replace defective component.
PROBLEM: High head pressure; Low suction pressure.
RESULT: Lack of sufficient indoor airflow.
FIX: Clean/check filters, registers, or evaporator coil that may cause a restriction.
RESULT: Lack of sufficient indoor airflow.
FIX: Clean/check filters, registers, or evaporator coil that may cause a restriction.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Dirty outdoor coil.
FIX: Clean coil.
RESULT: Dirty outdoor coil.
FIX: Clean coil.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Refrigerant overcharge.
FIX: Correct system charge.
RESULT: Refrigerant overcharge.
FIX: Correct system charge.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Outdoor fan not running.
FIX: Repair or replace.
RESULT: Outdoor fan not running.
FIX: Repair or replace.
PROBLEM: High head pressure; Normal suction pressure.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
PROBLEM: Low head pressure; High suction pressure.
RESULT: Expansion device stuck in open position.
FIX: Replace expansion device.
RESULT: Expansion device stuck in open position.
FIX: Replace expansion device.
PROBLEM: Low head pressure; High suction pressure.
RESULT: Defective compressor valves.
FIX: Replace compressor.
RESULT: Defective compressor valves.
FIX: Replace compressor.
PROBLEM: Low suction pressure; Compressor cool. Ice on indoor coil.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
PROBLEM: Low suction pressure; Compressor cool. Ice on indoor coil.
RESULT: Operating below 65F (18C) outdoors.
FIX: Add low ambient kit.
RESULT: Operating below 65F (18C) outdoors.
FIX: Add low ambient kit.
PROBLEM: Low suction pressure; Compressor cool. Ice on indoor coil.
RESULT: Moisture in system.
FIX: Recover refrigerant - evacuate and recharge - replace filter drier.
RESULT: Moisture in system.
FIX: Recover refrigerant - evacuate and recharge - replace filter drier.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: Excessive load.
FIX: Recheck load calculation.
RESULT: Excessive load.
FIX: Recheck load calculation.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: Defective compressor.
FIX: Replace.
RESULT: Defective compressor.
FIX: Replace.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: TXV hunting.
FIX: Check TXV bulb clamp - check air distribution on coil - replace TXV.
RESULT: TXV hunting.
FIX: Check TXV bulb clamp - check air distribution on coil - replace TXV.
PROBLEM: High suction pressure; or fluctuating head and suction pressures.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
PROBLEM: Pulsing noise at expansion device or liquid line.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
RESULT: Air or non-condensables in system.
FIX: Recover refrigerant, evacuate and recharge.
PROBLEM: Registers sweat.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
RESULT: Low indoor airflow.
FIX: Increase speed of blower or reduce restriction - replace air filter.
See What Our Customers Are Saying:
Feb 1, 2021
I received three quotes before deciding to choose Twintech. Dave's prices was much more reasonable than the competitors. I most appreciated their honest recommendations. Others tried to oversell their products and services. Thank you Dave!
Feb 1, 2021
They had the best price and did a great job on the installation. Recommend them to anyone.
Feb 1, 2021
It was a amazing and professional high quality job
Friendly and very helpful representatives
Thank you for understanding my concern
And explain very well
Overall we pleased with your service
Tanks
May 15, 2020
My 19 year old furnace stopped working when the cold weather hit in November, and I was left without heat. I interviewed several companies and found TWINTECH HEATING and COOLING to be very knowledgeable, quick to respond to my inquiries and very competitively priced.
Dave provided all of the information and pricing ahead of time and set up the appointment for the installation. Greg and Mitch arrived on time to do the installation and worked quickly and efficiently to complete the job.
After the completion of the installation, Dave followed up to ensure that everything was working well and that I didn't have any concerns.
Overall, this was a low-stress and flawless experience from start to finish. I would highly recommend TWINTECH HEATING and COOLING to anyone that requires a new furnace.
May 14, 2020
Our 20 year old furnace broke down during the first cold weekend this past November and our usual HVAC company never returned our phone call. Their loss, missing out on a sale since we didn't want to spend much fixing an old furnace and our 40 year old air conditioner was also long overdue for replacement. We proceeded in obtaining three different quotes for furnace and air conditioner replacement, and proceeded with the one we received from Twintech.
Dave was friendly, knowledgable and accommodating to our schedule and provided with us with a price that fell in the middle of the three quotes that we had. We felt that the Amana furnace and air conditioner he quoted us on were the best products and value offered to us and felt most comfortable with the professionalism and reputation of Twintech.
Greg, Grant and Mitch were at our house for installation the day after we decided to proceed. The guys were friendly and informative, the job was completed efficiently and workmanship appears excellent. Our house is certainly much more comfortable with the new two-stage variable speed Amana furnace compared to the old clunker! And, we're looking forward to enjoying the new air conditioner once summer rolls around again. Thanks Twintech!
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
May 11, 2020
We couldnt have been more impressed with Twintech - from our first service call with Mitch who took the time to thoroughly diagnose the issue with our furnace, to Dave who proposed a well thought out solution to meet our needs and finally Greg and team who acted quickly to install given we had no heat.
We did our due diligence by soliciting quotes from alternate providers and were shocked and disappointed by the aggressive and manipulative tactics used.
Twintech was honest in their approach, detailed in their product knowledge, reasonably priced, diligent in their follow-up and valued our business.
Well done Twintech! You made this a positive experience for us and our new furnace works beautifully!
May 10, 2020
We recently purchased an Amana high efficiency furnace and humdifier through Twintech. The work was completed very professionally and the quality of the workmanship was high. There was some additional sheet metal work required to complete the installation, which they were able to complete themselves. Overall I am very pleased with the work and would highly recommend Twintech for a furnace replacement.
May 9, 2020
We were very pleased with every aspect of the work that was done. They were very professional and polite. They arrived when they said they would and job was completed on estimated time
We would highly recommend them to whoever needed a recommendation
We have a very large dog and they were very understanding and respectful of him being around