Durham Region Air Conditioning Repair, Service and Installation
If you are an owner of Ruud furnace or operate it at your work, you may encounter with Ruud furnace error codes appearing in the operation process. The tables on the page describe the codes, flashes, blinks and other problem signals and let you understand what is going on with the equipment at a certain moment.
Ruud R801T Furnace Error Code
CODE: 0.
RESULT: Standby.
RESULT: Standby.
CODE: C.
RESULT: Compressor on (cooling or heat-pump heat).
RESULT: Compressor on (cooling or heat-pump heat).
CODE: H.
RESULT: Gas heat on.
RESULT: Gas heat on.
CODE: F.
RESULT: Continuous fan on.
RESULT: Continuous fan on.
CODE: 10.
RESULT: 1 hour lockout.
RESULT: 1 hour lockout.
CODE: 11.
RESULT: Failed ignition.
RESULT: Failed ignition.
CODE: 12.
RESULT: Low flame sense.
RESULT: Low flame sense.
CODE: 13.
RESULT: Flame lost.
RESULT: Flame lost.
CODE: 14.
RESULT: Unexpected flame.
RESULT: Unexpected flame.
CODE: 20.
RESULT: Twinning fault.
RESULT: Twinning fault.
CODE: 22.
RESULT: Main limit open.
RESULT: Main limit open.
CODE: 26.
RESULT: Line and neutral reversed.
RESULT: Line and neutral reversed.
CODE: 33.
RESULT: Mrlc (manual reset limit control) (aka roll-out) open.
RESULT: Mrlc (manual reset limit control) (aka roll-out) open.
CODE: 55.
RESULT: Pressure switch stuck closed when should be open.
RESULT: Pressure switch stuck closed when should be open.
CODE: 57.
RESULT: Press switch stuck open when should be closed.
RESULT: Press switch stuck open when should be closed.
CODE: 61.
RESULT: Blower fault-blower unable to run.
RESULT: Blower fault-blower unable to run.
CODE: 93.
RESULT: Internal control fault.
RESULT: Internal control fault.
Ruud U98V Furnace Error Code
FLAME LED: OFF.
RESULT: No flame is detected.
RESULT: No flame is detected.
FLAME LED: Rapid blink.
RESULT: Unexpected flame.
RESULT: Unexpected flame.
FLAME LED: Slow blink.
RESULT: Marginal flame sense.
RESULT: Marginal flame sense.
FLAME LED: Steady ON.
RESULT: Normal flame detected.
RESULT: Normal flame detected.
STATUS LED: Steady ON.
RESULT: Furnace.
RESULT: Furnace.
STATUS LED: 1 Blink.
RESULT: Ignition failure, 1 HR lockout.
FIX: Reboot system.
RESULT: Ignition failure, 1 HR lockout.
FIX: Reboot system.
STATUS LED: 2 Blinks.
RESULT: Pressure switch stuck open, switch will not close when inducer is on.
FIX: Try to manually close the switch, replace the switch, or check blowers and vents for air pressure.
RESULT: Pressure switch stuck open, switch will not close when inducer is on.
FIX: Try to manually close the switch, replace the switch, or check blowers and vents for air pressure.
STATUS LED: 3 Blinks.
RESULT: Limit switch open, main limit or roll out control
FIX: Check for a restricted air vent, loose blower wheel, a defective blower, or a dirty air filter.
RESULT: Limit switch open, main limit or roll out control
FIX: Check for a restricted air vent, loose blower wheel, a defective blower, or a dirty air filter.
STATUS LED: 4 Blinks.
RESULT: Pressure switch stuck closed, switch will not open.
FIX: Check for an obstruction in the pressure tubing.
RESULT: Pressure switch stuck closed, switch will not open.
FIX: Check for an obstruction in the pressure tubing.
STATUS LED: 5 Blinks.
RESULT: Not applicable.
RESULT: Not applicable.
STATUS LED: 6 Blinks.
RESULT: Line and neutral reversed.
FIX: Control board or the furnace's ground could be defective.
RESULT: Line and neutral reversed.
FIX: Control board or the furnace's ground could be defective.
POWER LED: OFF.
RESULT: No power (24 VAC) to control board.
RESULT: No power (24 VAC) to control board.
POWER LED: ON.
RESULT: Control is powered.
RESULT: Control is powered.
Ruud R802P Furnace Error Code
FLAME LED: OFF.
RESULT: No flame is detected.
RESULT: No flame is detected.
FLAME LED: Rapid Blink.
RESULT: Unexpected Flame.
RESULT: Unexpected Flame.
FLAME LED: Slow Blink.
RESULT: Marginal Flame Sense.
RESULT: Marginal Flame Sense.
FLAME LED: Steady ON.
RESULT: Normal Flame Detected.
RESULT: Normal Flame Detected.
STATUS LED: Steady ON.
RESULT: Normal Fault detected.
RESULT: Normal Fault detected.
STATUS LED: 1 Blink.
RESULT: Ignition failure, 1 HR lockout.
RESULT: Ignition failure, 1 HR lockout.
STATUS LED: 2 Blinks.
RESULT: Pressure switch stuck open switch will not close when inducer is on.
RESULT: Pressure switch stuck open switch will not close when inducer is on.
STATUS LED: 3 Blinks.
RESULT: Limit switch open main limit or roll-out control.
RESULT: Limit switch open main limit or roll-out control.
STATUS LED: 4 Blinks.
RESULT: Pressure switch stuck closed. Switch will not open.
RESULT: Pressure switch stuck closed. Switch will not open.
STATUS LED: 5 Blinks.
RESULT: Not applicable.
RESULT: Not applicable.
STATUS LED: 6 Blinks.
RESULT: Line and Neutral reversed.
RESULT: Line and Neutral reversed.
POWER LED: OFF.
RESULT: No power (24VAC) to control board.
RESULT: No power (24VAC) to control board.
POWER LED: ON.
RESULT: Control is powered.
RESULT: Control is powered.
Ruud R96P Furnace Error Code
GREEN LED: ON.
RESULT: Normal operation.
RESULT: Normal operation.
GREEN LED: 1 Flash.
RESULT: Ignition failure (4 trials).
RESULT: Ignition failure (4 trials).
GREEN LED: 2 Flashes.
RESULT: Pressure switch stuck open.
RESULT: Pressure switch stuck open.
GREEN LED: 3 Flashes.
RESULT: Limit switches open.
RESULT: Limit switches open.
GREEN LED: 4 Flashes.
RESULT: Pressure switch stuck closed.
RESULT: Pressure switch stuck closed.
GREEN LED: 5 Flashes.
RESULT: Twin fault.
RESULT: Twin fault.
GREEN LED: 6 Flashes.
RESULT: Brownout voltage.
RESULT: Brownout voltage.
GREEN LED: 7 Flashes.
RESULT: Hot and neutral reversed or no ground.
RESULT: Hot and neutral reversed or no ground.
GREEN LED: Continuous.
RESULT: Gas valve relay short.
RESULT: Gas valve relay short.
YELLOW LED: Rapid Blink.
RESULT: Flame out of sequence.
RESULT: Flame out of sequence.
YELLOW LED: Slow Blink.
RESULT: Low flame or no flame.
RESULT: Low flame or no flame.
YELLOW LED: ON.
RESULT: Flame present.
RESULT: Flame present.
See What Our Customers Are Saying:
Aug 16, 2022
Very pleased with the installation of our new furnace and A/C unit. From quotation stage to the completion of the job Twintech was very professional.
Thank you for a job well done.
Aug 15, 2022
My old water heater quit on me. I called TwinTech. In less than 4 days, I had my new water heater installed and the old one taken away. The whole process was quick, easy, pleasant, and well done. This is the third time I've dealt with TwinTech and I've been satisfied each time.
Aug 14, 2022
I had them replace my furnace last year. When it came time for the air conditioner this year, I did not hesitate to call Twintech again. I will also have them perform regular maintenance on them.
Aug 13, 2022
We required a new HVAC replacement after running the old
system for 18 years.
Dave understood our requirements and gave us a quote that
covered all the necessary items.
Installation was fast and very tidy. Everything works as
it should. Our thanks to Greg, Mitch and others for their
excellent work. Recommend this family owned business to
anyone else, considering HVAC or other work.
Aug 12, 2022
I needed a new furnace and A/C to replace my 21 yr. old units, and went to the internet to view potential companies in May, I received 3 quotes,
and chose Twintech based on their salesman Dave who was very detailed and covered off everything on what Twintech was all about,
an extremely dedicated company with so many years of experience, and after reading the on line reviews I was sold on Twintech, who did not disappoint as the installation team were top notch with Greg leading,
I would highly recommend this company without any doubts, in my books they are first class all the way. Our new Amana furnace and A/C are working perfectly !
Aug 11, 2022
Flawless transaction. They did exactly what they promised, showed-up on time, cleaned-up, and were highly professional. Highly recommended.
Aug 10, 2022
Salesperson and 2 man installation team were all professional and
knew their stuff. All three were friendly and helpful, answering all
my questions. The quality of their work demonstrated their experience
and expertise in their field.
Aug 9, 2022
A dear late cousin of mine recommended this company and I have been happy with the service.
Aug 8, 2022
We are very pleased with the work done by Twintech. They were very professional from start to finish. Dave came to our home and gave us a very competitive quote for new high efficiency furnace and air conditioner. The installers were very courteous and professional. We would highly recommend them.
Aug 7, 2022
Great experience getting an old furnace replaced.
Sales Guy (Dave) was great - honest, responsive, and friendly.
The work itself was done quickly and we are very happy with the outcome, thank you! We recommend TwinTech!
See What Our Customers Are Saying:
Aug 8, 2025
We are very happy to recommend this company to everyone. Our furnace broke down on Sunday morning. We phoned them and before noon Grant the owner showed up. He worked on the furnace for about a hour not wanting to give up to fix the problem. The furnace was 17 years old. I was the one talking about replacing it. End result was the next day it was all done. On the Sunday Bob came over with heaters to warm up the house. We decided to replace the water heater at the same time. Thanks Grant for the excellent work. Thumbs up.
Aug 8, 2025
Right on time. Explained how to work the HRV in a different way so the house would not be so dry. Changed my whole house water filter for me as well. Friendly, helpful, caring service!
Feb 18, 2025
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
Feb 18, 2025
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
Feb 18, 2025
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Twintech Is the Best Choice for Heat Pump Installation in the Durham Region
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - December 12, 2025
Choosing the right company to install your heat pump is just as important as choosing the right equipment. Even the most advanced system will underperform if it’s installed improperly. For homeowners across the Durham Region, Twintech Hea
Read MoreLouder Than Expected Heat Pump
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - November 17, 2023
If your heat pump is louder than expected, there could be a few reasons for this. Here are some common factors that may contribute to a noisy heat pump: Normal Operation Noise: Heat pumps do make some noise during normal operation. The compr
Read MoreFeatures of a Panasonic Heat Pump
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - June 22, 2025
When it comes to energy-efficient climate control, few brands are as trusted as Panasonic. Known for high-quality innovation, a Panasonic heat pump provides homeowners with an eco-friendly and cost-effective way to heat and cool their spaces. L
Read MoreDangers of a Poorly Maintained Air Conditioner
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - June 3, 2024
Poorly maintained air conditioners can pose several dangers to health, safety, and overall home environment. Here are some of the key risks: Health Risks Poor Air Quality: Accumulated dust, mold, and other allergens can be circulated by a ne
Read More