Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your tempstar furnace, look no further! Our comprehensive tempstar repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
CODE: Heartbeat LED pattern on solid.
RESULT: The control is locked out and will auto-reset after 1 hour.
FIX: Reset power to clear the lockout.
RESULT: The control is locked out and will auto-reset after 1 hour.
FIX: Reset power to clear the lockout.
CODE: Two LED flashes.
RESULT: Pressure switch didn't open.
FIX: Obstructed pressure tubing; a pressure switch that's stuck closed.
RESULT: Pressure switch didn't open.
FIX: Obstructed pressure tubing; a pressure switch that's stuck closed.
CODE: Three LED flashes.
RESULT: The low-pressure switch did not close or has reopened.
FIX: Proper vent sizing; air leak; restricted vent; clogged condensate drain; low input gas pressure; excessive wind; improper pressure switch wiring; water in vent piping; disconnected or obstructed pressure tubing.
RESULT: The low-pressure switch did not close or has reopened.
FIX: Proper vent sizing; air leak; restricted vent; clogged condensate drain; low input gas pressure; excessive wind; improper pressure switch wiring; water in vent piping; disconnected or obstructed pressure tubing.
CODE: Four LED flashes.
RESULT: Limit circuit fault.
FIX: Loose blower wheel; defective switch or connections; improper minimum- or maximum-heat gas input adjustment; dirty filter or restricted duct system; improper limit switch.
RESULT: Limit circuit fault.
FIX: Loose blower wheel; defective switch or connections; improper minimum- or maximum-heat gas input adjustment; dirty filter or restricted duct system; improper limit switch.
CODE: Five LED flashes.
RESULT: Abnormal flame-proving signal.
FIX: Leaky gas valve; stuck-open gas valve.
RESULT: Abnormal flame-proving signal.
FIX: Leaky gas valve; stuck-open gas valve.
CODE: Six LED flashes.
RESULT: Ignition proving a failure.
FIX: Low inlet gas pressure; control ground continuity; gas valve defect; defective hot surface igniter; oxide buildup on the flame sensor; inadequate flame carryover; flame sensor mustn't be grounded.
RESULT: Ignition proving a failure.
FIX: Low inlet gas pressure; control ground continuity; gas valve defect; defective hot surface igniter; oxide buildup on the flame sensor; inadequate flame carryover; flame sensor mustn't be grounded.
CODE: Seven LED flashes.
RESULT: Limit circuit lockout.
FIX: Control will auto-reset after 3 hours. Refer to status code #4.
RESULT: Limit circuit lockout.
FIX: Control will auto-reset after 3 hours. Refer to status code #4.
CODE: Eight LED flashes.
RESULT: Gas heating lockout.
FIX: Gas valve stuck closed on control.
RESULT: Gas heating lockout.
FIX: Gas valve stuck closed on control.
CODE: Nine LED flashes.
RESULT: Medium pressure switch, high-pressure switch, or PSR relay didn't close or was reopened.
FIX: Refer to status code #3.
RESULT: Medium pressure switch, high-pressure switch, or PSR relay didn't close or was reopened.
FIX: Refer to status code #3.
CODE: Ten LED flashes.
RESULT: Polarity.
FIX: Correct line voltage polarity.
RESULT: Polarity.
FIX: Correct line voltage polarity.
CODE: Status codes 1 + 2.
RESULT: Blower on after power up.
FIX: Normal operation.
RESULT: Blower on after power up.
FIX: Normal operation.
CODE: Status codes 1 + 5.
RESULT: Blower motor lockout.
FIX: Control will auto-reset after 3 hours. Refer to status code #4 + 1.
RESULT: Blower motor lockout.
FIX: Control will auto-reset after 3 hours. Refer to status code #4 + 1.
CODE: Status codes 3 + 5.
RESULT: Gas valve fault.
FIX: RED, YELLOW, or ORANGE wire at the gas valve.
RESULT: Gas valve fault.
FIX: RED, YELLOW, or ORANGE wire at the gas valve.
CODE: Status codes 4 + 1.
RESULT: Blower motor fault.
FIX: Blower failed to reach 250 RPM, or the blower failed to communicate within the prescribed time limits.
RESULT: Blower motor fault.
FIX: Blower failed to reach 250 RPM, or the blower failed to communicate within the prescribed time limits.
CODE: Status codes 4 + 2.
RESULT: Inducer motor fault.
FIX: Proper vent sizing; restricted vent; failed inducer motor; improper motor wiring; a blockage in the tubing to the pressure switch assembly.
RESULT: Inducer motor fault.
FIX: Proper vent sizing; restricted vent; failed inducer motor; improper motor wiring; a blockage in the tubing to the pressure switch assembly.
CODE: Status codes 4 + 3.
RESULT: The low or medium pressure switch is open while the medium or high-pressure switch is closed.
FIX: Low inlet gas pressure; clogged condensate drain; improper pressure switch wiring; water in vent piping; low or medium pressure switch stuck open; disconnected or obstructed pressure tubing.
RESULT: The low or medium pressure switch is open while the medium or high-pressure switch is closed.
FIX: Low inlet gas pressure; clogged condensate drain; improper pressure switch wiring; water in vent piping; low or medium pressure switch stuck open; disconnected or obstructed pressure tubing.
CODE: Status codes 6 + 1.
RESULT: Ignition lockout.
FIX: Control will auto-reset after 3 hours. Refer to status code #6.
RESULT: Ignition lockout.
FIX: Control will auto-reset after 3 hours. Refer to status code #6.
See What Our Customers Are Saying:
Aug 16, 2022
Very pleased with the installation of our new furnace and A/C unit. From quotation stage to the completion of the job Twintech was very professional.
Thank you for a job well done.
Aug 15, 2022
My old water heater quit on me. I called TwinTech. In less than 4 days, I had my new water heater installed and the old one taken away. The whole process was quick, easy, pleasant, and well done. This is the third time I've dealt with TwinTech and I've been satisfied each time.
Aug 14, 2022
I had them replace my furnace last year. When it came time for the air conditioner this year, I did not hesitate to call Twintech again. I will also have them perform regular maintenance on them.
Aug 13, 2022
We required a new HVAC replacement after running the old
system for 18 years.
Dave understood our requirements and gave us a quote that
covered all the necessary items.
Installation was fast and very tidy. Everything works as
it should. Our thanks to Greg, Mitch and others for their
excellent work. Recommend this family owned business to
anyone else, considering HVAC or other work.
Aug 12, 2022
I needed a new furnace and A/C to replace my 21 yr. old units, and went to the internet to view potential companies in May, I received 3 quotes,
and chose Twintech based on their salesman Dave who was very detailed and covered off everything on what Twintech was all about,
an extremely dedicated company with so many years of experience, and after reading the on line reviews I was sold on Twintech, who did not disappoint as the installation team were top notch with Greg leading,
I would highly recommend this company without any doubts, in my books they are first class all the way. Our new Amana furnace and A/C are working perfectly !
Aug 11, 2022
Flawless transaction. They did exactly what they promised, showed-up on time, cleaned-up, and were highly professional. Highly recommended.
Aug 10, 2022
Salesperson and 2 man installation team were all professional and
knew their stuff. All three were friendly and helpful, answering all
my questions. The quality of their work demonstrated their experience
and expertise in their field.
Aug 9, 2022
A dear late cousin of mine recommended this company and I have been happy with the service.
Aug 8, 2022
We are very pleased with the work done by Twintech. They were very professional from start to finish. Dave came to our home and gave us a very competitive quote for new high efficiency furnace and air conditioner. The installers were very courteous and professional. We would highly recommend them.
Aug 7, 2022
Great experience getting an old furnace replaced.
Sales Guy (Dave) was great - honest, responsive, and friendly.
The work itself was done quickly and we are very happy with the outcome, thank you! We recommend TwinTech!
See What Our Customers Are Saying:
Aug 8, 2025
We are very happy to recommend this company to everyone. Our furnace broke down on Sunday morning. We phoned them and before noon Grant the owner showed up. He worked on the furnace for about a hour not wanting to give up to fix the problem. The furnace was 17 years old. I was the one talking about replacing it. End result was the next day it was all done. On the Sunday Bob came over with heaters to warm up the house. We decided to replace the water heater at the same time. Thanks Grant for the excellent work. Thumbs up.
Aug 8, 2025
Right on time. Explained how to work the HRV in a different way so the house would not be so dry. Changed my whole house water filter for me as well. Friendly, helpful, caring service!
Feb 18, 2025
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
Feb 18, 2025
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
Feb 18, 2025
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Why Did My Heat Pump Shut Off On Its Own?
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - November 26, 2023
There could be several reasons why your heat pump shut off on its own. Some common reasons include: Thermostat Settings: Check your thermostat settings to ensure that the desired temperature is set correctly. If the temperature setti
Read MoreThe Importance of Keeping a Clean Furnace Room
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - October 12, 2024
A clean furnace room is essential for both safety and efficiency in your home. Dust, debris, and clutter can cause a range of problems that may affect the performance of your furnace and even pose a fire hazard. Keeping this area clean ensures that y
Read MoreShould You Switch to a Gas Fireplace
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - January 19, 2022
What could be more peaceful than curling up with a good book in front of a glowing fireplace Fireplaces can be a magnificent staple in any home or business. Not only do fireplaces provide great ambiance and warmth, but they also help increase a prop
Read MoreHow to Inspect your Duct System
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - November 19, 2015
Furnaces and air conditioners are the source for all the comfort your HVAC system provides but none of that warm or cool air goes where it’s supposed to without your duct system. Making sure that system is running properly is an important part of k
Read More