Durham Region Air Conditioning Repair, Service and Installation
The flashing LEDs on your furnace will correspond to a specific fault code that is shown here on their diagnostic chart.
If you have a Trane furnace, then you have one of the most reliable heating systems in existence. However, even the most reliable furnace runs into problems from time to time, and this is why your Trane has included several error codes to help you find a given issue. However, if you're unfamiliar with error codes for furnaces, then you may be unaware of what these codes mean.
To get peace of mind, it's important that you take a look at typical Trane furnace error codes to you learn what these error codes mean so you can get your system the service it needs.
CODE: Flashing Slow
RESULT: Normal no call for heat.
FIX: This is only an issue if you have raised your thermostat and your furnace doesn't respond.
RESULT: Normal no call for heat.
FIX: This is only an issue if you have raised your thermostat and your furnace doesn't respond.
CODE: Flashing Fast
RESULT: Normal call for heat.
FIX: Only beware this if your furnace is continuously calling for heat and isn't responding to your thermostat..
RESULT: Normal call for heat.
FIX: Only beware this if your furnace is continuously calling for heat and isn't responding to your thermostat..
CODE: Continuous On
RESULT: Control panel issue.
FIX: Replace Control Panel.
RESULT: Control panel issue.
FIX: Replace Control Panel.
CODE: Continuous Off
RESULT: Check Power.
FIX: Check Power.
RESULT: Check Power.
FIX: Check Power.
CODE: 2 Flashes
RESULT: External Lockout (Retried or recycles exceeded).
FIX: Check for miswiring, clogged pilot tube, or humidity in the unit.
RESULT: External Lockout (Retried or recycles exceeded).
FIX: Check for miswiring, clogged pilot tube, or humidity in the unit.
CODE: 3 Flashes
RESULT: Pressure Switch error.
FIX: Check if the drain tubes are full of moisture or obstructed with dirt.
RESULT: Pressure Switch error.
FIX: Check if the drain tubes are full of moisture or obstructed with dirt.
CODE: 4 Flashes
RESULT: Open high limit device.
FIX: The issue with thermal protection.
RESULT: Open high limit device.
FIX: The issue with thermal protection.
CODE: 5 Flashes
RESULT: Flame sensed when NO flame should be present.
FIX: Check for a leaky gas valve, stuck gas valve, or defective flame sensor.
RESULT: Flame sensed when NO flame should be present.
FIX: Check for a leaky gas valve, stuck gas valve, or defective flame sensor.
CODE: 6 Flashes
RESULT: 115 VAC power reversed polarity or poor grounding.
FIX: Correct line voltage polarity, check the wiring.
RESULT: 115 VAC power reversed polarity or poor grounding.
FIX: Correct line voltage polarity, check the wiring.
CODE: 7 Flashes
RESULT: Gas Valve circuit error.
FIX: Check your unit's gas valves for the issue.
RESULT: Gas Valve circuit error.
FIX: Check your unit's gas valves for the issue.
CODE: 8 Flashes
RESULT: Low Flame sens signal.
FIX: Check for flame sensor malfunction or low gas pressure.
RESULT: Low Flame sens signal.
FIX: Check for flame sensor malfunction or low gas pressure.
CODE: 9 Flashes
RESULT: Check Igniter.
FIX: Check igniter.
RESULT: Check Igniter.
FIX: Check igniter.
See What Our Customers Are Saying:
Apr 10, 2019
Had new furnace installed and ran into some difficulties but the contractor responded in a timely and efficient manner - after further service calls were made, a reasonable resolution was found.
Apr 8, 2019
The work was done quickly efficiently neatly and professionally. Pleased with the service, information, product, and the company.
Apr 1, 2019
Great sales member named Dave came in told us some amazing items and how they would be priced installed an all. We couldnt believe it! The next day the ac was installed, that day one employee named Greg told us that our furnace was working way to hard and was causing us to use way too much gas. So two days later they came in an installed a new furnace!
Apr 1, 2019
Installation was done quickly and professionally. The new furnace is quiet and provides even heat.
Mar 3, 2019
They removed and discarded old furnace. Installed new furnace. Installed air intake pipe, that had never been installed by builder, no charge. Replaced loose hose on floor with hard pipe and rerouted it to drain, no charge. Almost 33% cheaper then quote from Enercare, which was the company we dealt with and had insurance with for 8 years. No yearly fee for cleaning/insurance, saves 300 a year. Courteous, professional, fast, and friendly. My wife and I have been recommending them to everyone we know and meet, and will continue to do so. Thanks for everything, Twintech!!!
Mar 4, 2019
This company was great to deal with. Our furnace went down and they installed a new furnace the next day with a lot of professionalism!
Feb 22, 2019
Finally! An honest company with highly knowledgeable and informative staff. Had a furnace service and found multiply errors in our system from an amateur installer. Very fair price to correct problems and will definitely use again.
Feb 16, 2019
Had to replace the heating & a/c unit in a condo apartment dwelling. this company recommended by the property manager and president of the condo building. found their workmanship and attention to details very good and very thorough. were able to resolve small problems and situations and happy to feel the heat in my unit. it's pricey, but happy was done by a very professional service. thank you.
Feb 13, 2019
Fantastic team. Completed the job as per the specifications and in under 3 hours. Highly recommended Twintech.
Jan 30, 2019
During the summer, I previously hired TwinTech to replace my air conditioner when it failed. They did an excellent job so when I decided to proactively replace the furnace I contacted them. The furnace I had was 22 years old and showed signs of internal leakage. It still worked but rather than wait to have it fail in cold weather, I decided to purchase a higher efficiency model before it failed and take advantage of energy efficiency rebates. TwinTech offered very useful advice on the make and model of furnace to choose including high efficiency and variable speed motor. The price was reasonable, TwinTech arrived at the allotted time, installed the new furnace (including some re-routing of exhaust lines since the existing ones were too close to other vents), removed the old furnace, tested the installation and cleaned everything up. Overall, it was a good experience, they did a great job and the new furnace is working well.