Durham Region Air Conditioning Repair, Service and Installation
The flashing LEDs on your furnace will correspond to a specific fault code that is shown here on their diagnostic chart.
If you have a Trane furnace, then you have one of the most reliable heating systems in existence. However, even the most reliable furnace runs into problems from time to time, and this is why your Trane has included several error codes to help you find a given issue. However, if you're unfamiliar with error codes for furnaces, then you may be unaware of what these codes mean.
To get peace of mind, it's important that you take a look at typical Trane furnace error codes to you learn what these error codes mean so you can get your system the service it needs.
CODE: Flashing Slow
RESULT: Normal no call for heat.
FIX: This is only an issue if you have raised your thermostat and your furnace doesn't respond.
RESULT: Normal no call for heat.
FIX: This is only an issue if you have raised your thermostat and your furnace doesn't respond.
CODE: Flashing Fast
RESULT: Normal call for heat.
FIX: Only beware this if your furnace is continuously calling for heat and isn't responding to your thermostat..
RESULT: Normal call for heat.
FIX: Only beware this if your furnace is continuously calling for heat and isn't responding to your thermostat..
CODE: Continuous On
RESULT: Control panel issue.
FIX: Replace Control Panel.
RESULT: Control panel issue.
FIX: Replace Control Panel.
CODE: Continuous Off
RESULT: Check Power.
FIX: Check Power.
RESULT: Check Power.
FIX: Check Power.
CODE: 2 Flashes
RESULT: External Lockout (Retried or recycles exceeded).
FIX: Check for miswiring, clogged pilot tube, or humidity in the unit.
RESULT: External Lockout (Retried or recycles exceeded).
FIX: Check for miswiring, clogged pilot tube, or humidity in the unit.
CODE: 3 Flashes
RESULT: Pressure Switch error.
FIX: Check if the drain tubes are full of moisture or obstructed with dirt.
RESULT: Pressure Switch error.
FIX: Check if the drain tubes are full of moisture or obstructed with dirt.
CODE: 4 Flashes
RESULT: Open high limit device.
FIX: The issue with thermal protection.
RESULT: Open high limit device.
FIX: The issue with thermal protection.
CODE: 5 Flashes
RESULT: Flame sensed when NO flame should be present.
FIX: Check for a leaky gas valve, stuck gas valve, or defective flame sensor.
RESULT: Flame sensed when NO flame should be present.
FIX: Check for a leaky gas valve, stuck gas valve, or defective flame sensor.
CODE: 6 Flashes
RESULT: 115 VAC power reversed polarity or poor grounding.
FIX: Correct line voltage polarity, check the wiring.
RESULT: 115 VAC power reversed polarity or poor grounding.
FIX: Correct line voltage polarity, check the wiring.
CODE: 7 Flashes
RESULT: Gas Valve circuit error.
FIX: Check your unit's gas valves for the issue.
RESULT: Gas Valve circuit error.
FIX: Check your unit's gas valves for the issue.
CODE: 8 Flashes
RESULT: Low Flame sens signal.
FIX: Check for flame sensor malfunction or low gas pressure.
RESULT: Low Flame sens signal.
FIX: Check for flame sensor malfunction or low gas pressure.
CODE: 9 Flashes
RESULT: Check Igniter.
FIX: Check igniter.
RESULT: Check Igniter.
FIX: Check igniter.
See What Our Customers Are Saying:
Aug 16, 2022
Very pleased with the installation of our new furnace and A/C unit. From quotation stage to the completion of the job Twintech was very professional.
Thank you for a job well done.
Aug 15, 2022
My old water heater quit on me. I called TwinTech. In less than 4 days, I had my new water heater installed and the old one taken away. The whole process was quick, easy, pleasant, and well done. This is the third time I've dealt with TwinTech and I've been satisfied each time.
Aug 14, 2022
I had them replace my furnace last year. When it came time for the air conditioner this year, I did not hesitate to call Twintech again. I will also have them perform regular maintenance on them.
Aug 13, 2022
We required a new HVAC replacement after running the old
system for 18 years.
Dave understood our requirements and gave us a quote that
covered all the necessary items.
Installation was fast and very tidy. Everything works as
it should. Our thanks to Greg, Mitch and others for their
excellent work. Recommend this family owned business to
anyone else, considering HVAC or other work.
Aug 12, 2022
I needed a new furnace and A/C to replace my 21 yr. old units, and went to the internet to view potential companies in May, I received 3 quotes,
and chose Twintech based on their salesman Dave who was very detailed and covered off everything on what Twintech was all about,
an extremely dedicated company with so many years of experience, and after reading the on line reviews I was sold on Twintech, who did not disappoint as the installation team were top notch with Greg leading,
I would highly recommend this company without any doubts, in my books they are first class all the way. Our new Amana furnace and A/C are working perfectly !
Aug 11, 2022
Flawless transaction. They did exactly what they promised, showed-up on time, cleaned-up, and were highly professional. Highly recommended.
Aug 10, 2022
Salesperson and 2 man installation team were all professional and
knew their stuff. All three were friendly and helpful, answering all
my questions. The quality of their work demonstrated their experience
and expertise in their field.
Aug 9, 2022
A dear late cousin of mine recommended this company and I have been happy with the service.
Aug 8, 2022
We are very pleased with the work done by Twintech. They were very professional from start to finish. Dave came to our home and gave us a very competitive quote for new high efficiency furnace and air conditioner. The installers were very courteous and professional. We would highly recommend them.
Aug 7, 2022
Great experience getting an old furnace replaced.
Sales Guy (Dave) was great - honest, responsive, and friendly.
The work itself was done quickly and we are very happy with the outcome, thank you! We recommend TwinTech!