Durham Region Air Conditioning Repair, Service and Installation
Error Codes. By checking the error code, you are able to identify the status and the issue of the air conditioner/air conditioning system.
CODE: E0.
RESULT: Indoor EEPROM (Electrically Erasable Programmable Read-Only Memory) error.
RESULT: Indoor EEPROM (Electrically Erasable Programmable Read-Only Memory) error.
CODE: E1.
RESULT: Indoor and outdoor unit communication malfunction.
RESULT: Indoor and outdoor unit communication malfunction.
CODE: E3.
RESULT: Indoor fan speed malfunction.
RESULT: Indoor fan speed malfunction.
CODE: E4.
RESULT: Indoor room temperature sensor error.
RESULT: Indoor room temperature sensor error.
CODE: E5.
RESULT: Evaporator coil temperature sensor error.
RESULT: Evaporator coil temperature sensor error.
CODE: EC.
RESULT: Refrigerant leak detection system malfunction.
RESULT: Refrigerant leak detection system malfunction.
CODE: EE.
RESULT: Water level alarm malfunction.
RESULT: Water level alarm malfunction.
CODE: E8.
RESULT: Dual indoor unit (twin model only) communication malfunction.
RESULT: Dual indoor unit (twin model only) communication malfunction.
CODE: E9.
RESULT: Other twin model malfunction.
RESULT: Other twin model malfunction.
CODE: F0.
RESULT: Overload protection.
RESULT: Overload protection.
CODE: F1.
RESULT: Outdoor temperature sensor error.
RESULT: Outdoor temperature sensor error.
CODE: F2.
RESULT: Outdoor condenser pipe sensor error.
RESULT: Outdoor condenser pipe sensor error.
CODE: F3.
RESULT: Discharge air temperature sensor error.
RESULT: Discharge air temperature sensor error.
CODE: F4.
RESULT: Outdoor EEPROM (Electrically Erasable Programmable Read-Only Memory) error.
RESULT: Outdoor EEPROM (Electrically Erasable Programmable Read-Only Memory) error.
CODE: F5.
RESULT: Outdoor fan speed (DC fan motor only) malfunction.
RESULT: Outdoor fan speed (DC fan motor only) malfunction.
CODE: F6.
RESULT: T2b sensor error.
RESULT: T2b sensor error.
CODE: F7.
RESULT: Auto-lifting panel communication error.
RESULT: Auto-lifting panel communication error.
CODE: F8.
RESULT: Auto-lifting panel malfunction.
RESULT: Auto-lifting panel malfunction.
CODE: F9.
RESULT: Auto-lifting panel is open.
RESULT: Auto-lifting panel is open.
CODE: P0.
RESULT: Inverter module IPM protection.
RESULT: Inverter module IPM protection.
CODE: P1.
RESULT: High/Low voltage protection.
RESULT: High/Low voltage protection.
CODE: P2.
RESULT: Compressor top overheating protection.
RESULT: Compressor top overheating protection.
CODE: P3.
RESULT: Outdoor low temperature protection.
RESULT: Outdoor low temperature protection.
CODE: P4.
RESULT: Compressor drive error.
RESULT: Compressor drive error.
CODE: P5.
RESULT: Mode conflict.
RESULT: Mode conflict.
CODE: P6.
RESULT: Compressor low-pressure protection.
RESULT: Compressor low-pressure protection.
CODE: P7.
RESULT: Outdoor IGBT sensor error.
RESULT: Outdoor IGBT sensor error.
York Central Controller Fault Codes.
CODE: H3.
RESULT: Outdoor adding malfunction (valid for host unit).
RESULT: Outdoor adding malfunction (valid for host unit).
CODE: H2.
RESULT: Outdoor decreasing malfunction (valid for host unit).
RESULT: Outdoor decreasing malfunction (valid for host unit).
CODE: H1.
RESULT: Net communication malfunction.
RESULT: Net communication malfunction.
CODE: EF.
RESULT: Other malfunction.
RESULT: Other malfunction.
CODE: E4-T4.
RESULT: Temp. Sensor malfunction.
RESULT: Temp. Sensor malfunction.
CODE: E3-T3.
RESULT: Temp. Sensor malfunction.
RESULT: Temp. Sensor malfunction.
CODE: E2.
RESULT: Sensor malfunction.
RESULT: Sensor malfunction.
CODE: E1-E0.
RESULT: Communication malfunction Phase sequence or lack of phase.
RESULT: Communication malfunction Phase sequence or lack of phase.
CODE: PF.
RESULT: Other Protection.
RESULT: Other Protection.
CODE: PE.
RESULT: Oil Balance.
RESULT: Oil Balance.
CODE: PD.
RESULT: Oil Return.
RESULT: Oil Return.
CODE: PA.
RESULT: Defrost Protection.
RESULT: Defrost Protection.
CODE: P8.
RESULT: Compressor Current 3rd Protection.
RESULT: Compressor Current 3rd Protection.
CODE: P7.
RESULT: Compressor Current 2nd Protection.
RESULT: Compressor Current 2nd Protection.
CODE: P5.
RESULT: Condenser High Temp. Protection.
RESULT: Condenser High Temp. Protection.
CODE: P4.
RESULT: Discharge Pipe Temp. Protection.
RESULT: Discharge Pipe Temp. Protection.
CODE: P3.
RESULT: Compressor Current 1st Protection.
RESULT: Compressor Current 1st Protection.
CODE: P2.
RESULT: Discharge Low- pressure Protection.
RESULT: Discharge Low- pressure Protection.
CODE: P1-P0.
RESULT: Discharge High- pressure Protection Compressor High Temp. Protection.
RESULT: Discharge High- pressure Protection Compressor High Temp. Protection.
Malfunction Code of Outdoor unit.
CODE: E1.
RESULT: Phase sequence error.
RESULT: Phase sequence error.
CODE: E2.
RESULT: Communication malfunction between indoor/outdoor units.
RESULT: Communication malfunction between indoor/outdoor units.
CODE: E3.
RESULT: T3 temperature sensor malfunction.
RESULT: T3 temperature sensor malfunction.
CODE: E4.
RESULT: T4 temperature sensor malfunction.
RESULT: T4 temperature sensor malfunction.
CODE: E5.
RESULT: T5 temperature sensor malfunction.
RESULT: T5 temperature sensor malfunction.
CODE: E6.
RESULT: Water-level alarm malfunction.
RESULT: Water-level alarm malfunction.
York Central Air Conditioning Error Codes,
CODE: EF.
RESULT: Other malfunction PF Other Protection.
RESULT: Other malfunction PF Other Protection.
CODE: EE.
RESULT: Water level checking malfunction PE Reserve.
RESULT: Water level checking malfunction PE Reserve.
CODE: ED.
RESULT: Outdoor protection PD Reserve.
RESULT: Outdoor protection PD Reserve.
CODE: EC.
RESULT: Clear malfunction PC Reserve.
RESULT: Clear malfunction PC Reserve.
CODE: EB.
RESULT: Inverter Module Protection PB Reserve.
RESULT: Inverter Module Protection PB Reserve.
CODE: EA.
RESULT: Compressor Over-current (4 times) PA Reserve.
RESULT: Compressor Over-current (4 times) PA Reserve.
CODE: E9.
RESULT: Communication malfunction between PCB and Display board P9 Reserve.
RESULT: Communication malfunction between PCB and Display board P9 Reserve.
CODE: E8.
RESULT: Fan motor checking out of control P8 Compressor Over-current.
RESULT: Fan motor checking out of control P8 Compressor Over-current.
CODE: E7.
RESULT: EEPROM malfunction P7 Power Lack/Over Volt Protection.
RESULT: EEPROM malfunction P7 Power Lack/Over Volt Protection.
CODE: E6.
RESULT: Over-zero checking malfunction P6 Discharge Low-pressure Protection.
RESULT: Over-zero checking malfunction P6 Discharge Low-pressure Protection.
CODE: E5.
RESULT: T3 sensor malfunction P5 Discharge High-pressure Protection.
RESULT: T3 sensor malfunction P5 Discharge High-pressure Protection.
CODE: E4.
RESULT: T2B sensor malfunction P4 Discharge Pipe Temp. Protection.
RESULT: T2B sensor malfunction P4 Discharge Pipe Temp. Protection.
CODE: E3.
RESULT: T2A sensor malfunction P3 Compressor Temp. Protection.
RESULT: T2A sensor malfunction P3 Compressor Temp. Protection.
CODE: E2.
RESULT: T1 sensor malfunction P2 Condenser High Temp. Protection.
RESULT: T1 sensor malfunction P2 Condenser High Temp. Protection.
CODE: E1.
RESULT: Communication malfunction P1 Anti-cooling or Defrost Protection.
RESULT: Communication malfunction P1 Anti-cooling or Defrost Protection.
CODE: E0.
RESULT: Phase sequence or lack of phase P0 Evaporator Temp. Protection.
RESULT: Phase sequence or lack of phase P0 Evaporator Temp. Protection.
CODE: 03#.
RESULT: CCM/PC(gateway) Communication Malfunction.
RESULT: CCM/PC(gateway) Communication Malfunction.
CODE: 02#.
RESULT: CCM/Function Module Communication Malfunction.
RESULT: CCM/Function Module Communication Malfunction.
CODE: 01#.
RESULT: CCM/NIM Communication Malfunction.
RESULT: CCM/NIM Communication Malfunction.
CODE: 00#.
RESULT: CCM/PCB Communication Malfunction.
RESULT: CCM/PCB Communication Malfunction.
York Wall Mounted Type Ac Error Codes.
CODE: E7.
RESULT: Communication fault between indoor and outdoor units.
RESULT: Communication fault between indoor and outdoor units.
CODE: E1.
RESULT: Room temperature sensor failure.
RESULT: Room temperature sensor failure.
CODE: E4.
RESULT: Indoor EEPROM error.
RESULT: Indoor EEPROM error.
CODE: E14.
RESULT: Indoor fan motor malfunction.
RESULT: Indoor fan motor malfunction.
CODE: F12.
RESULT: Outdoor EEPROM error.
RESULT: Outdoor EEPROM error.
CODE: F1.
RESULT: The protection of IPM.
RESULT: The protection of IPM.
CODE: F22.
RESULT: Overcurrent protection of AC electricity for the outdoor model.
RESULT: Overcurrent protection of AC electricity for the outdoor model.
CODE: F3.
RESULT: Communication fault between the IPM and outdoor PCB.
RESULT: Communication fault between the IPM and outdoor PCB.
CODE: F19.
RESULT: Power voltage is too high or low.
RESULT: Power voltage is too high or low.
CODE: F4.
RESULT: Overheat protection for Discharge temperature.
RESULT: Overheat protection for Discharge temperature.
CODE: F8.
RESULT: Outdoor DC fan motor fault.
RESULT: Outdoor DC fan motor fault.
CODE: F21.
RESULT: Defrost temperature sensor failure.
RESULT: Defrost temperature sensor failure.
CODE: F7.
RESULT: Suction temperature sensor failure.
RESULT: Suction temperature sensor failure.
CODE: F6.
RESULT: Ambient temperature sensor failure.
RESULT: Ambient temperature sensor failure.
CODE: F25.
RESULT: Discharge temperature sensor failure.
RESULT: Discharge temperature sensor failure.
CODE: F11.
RESULT: deviate from the normal for the compressor.
RESULT: deviate from the normal for the compressor.
CODE: F28.
RESULT: Loop of the station detect error.
RESULT: Loop of the station detect error.
CODE: F2.
RESULT: Overcurrent of the compressor.
RESULT: Overcurrent of the compressor.
CODE: F23.
RESULT: Overcurrent protection for single-phase of the compressor.
RESULT: Overcurrent protection for single-phase of the compressor.
See What Our Customers Are Saying:
May 9, 2018
I had cold and hot spots all over my 70 yr old home. My furnace is quite new and Greg optimized the fan and furnace. The original installer just took it out of the box with factory settings and installed it- basically running at 50% of capacity. Greg also routed heat into my laundry room, yeah - so now I can renovate laundry room - thanks Greg. He is honest, professional and knowledgeable. I will be calling him back in the spring to optimize my AC as well.
May 8, 2018
Wonderful from beginning to end. I tend to fret and worry about home improvements but the excellent team at TwinTech put my mind as ease. They listen, they are patient and best of all ... the work they did is amazing! I chose the Goodman 80K BTU 2 stage furnace and the matching Goodman air conditioner. Greg, Grant and Poitr "Peter" arrived on time, took great care, explained everything to me and they answered all of my questions. They carefully adjusted the factory settings to optimize the furnace for my house and they also checked the duct work in the basement. Dave, the Sales Manager, came by to say "hello" and to see if I was happy. YES, I am happy with the work! The furnace is very quiet. I have it running on low just to circulate the air in the house and it's so much quieter than my old furnace. When I need new duct work for an upcoming basement renovation TwinTech will be my first choice. I highly recommend TwinTech. PS. They were even nice to my dogs.
Apr 21, 2018
Greg was prompt on the scheduled day of installation and the work was done well within the time estimated beforehand. Installation was neat and the equipment and scope of work was as specified in the quote. One item I must point out is that we were faced with a "No Heat" situation the day before the scheduled installation and Greg came out to address it free of charge. Not only that, but he also corrected an installation fault with our smart thermostat that was not part of the original job, again free of charge.
Mar 16, 2018
Greg came by to do a routine furnace checkup. He was very knowledgeable and professional, letting me know what's being checked/adjusted and giving me tips to ensure everything runs smooth. Very honest and upfront about what's working fine vs. what may need to be fixed/replaced. He didn't attempt to up sell anything that wasn't necessary. I'm glad to have finally found someone I can trust and rely on for all my HVAC needs - furnace, A/C, and hot water tank.
Mar 4, 2018
I'm very happy with the work that was done. Everyone from salesperson to the installers were friendly and professional. They were on time and cleaned up the job site after it was installed. They also answered all my follow up questions promptly. I wouldn't hesitate to work with them or recommend them again.
Feb 28, 2018
Thanks to the team at Twin Tech for a great job installing my new heat pump/ac unit. The guys were very polite and professional. When they left you would never have known they had been there except for the new Mitsubishi unit on the wall!! would highly recommend the Twin Tech team.
Feb 28, 2018
Installed professionally, no delays, no rework needed. Very reliable contractor and sales person. Also installed BBQ gas line and some duct work.
Feb 19, 2018
Greg and Grant are friendly, reliable, and knowledgeable HVAC professionals. The twins, Dave and the entire team provided efficient top quality service. Our family plns to use Twintech for all of our future HVAC needs.
Feb 10, 2018
Very impressed with this company. They show up on time , kept my place clean and after they left it looks like they were never there. Very professional team. Those people know what they doing . Their installation was on the highest standard. They are very knowledgeable especially they're worker Peter. I strongly recommend this company to everybody. After the installation I receive the call making sure I'm satisfied with their products and their job. Bravo!!!
Feb 8, 2018
Greg and his brother were referred to us by a friend. They arrived when they said they would, did an exceptional job and left the place as tidy or tidier then they found it. Their professionalism is only surpassed by their kind and friendly demeanor. Even after several calls to help me with my high tech thermostat I feel that I could always call with any concern (No one responds to my texts as quickly as Greg) and have a friendly helpful response. I found out their grandfather started the company and now as a 3rd generation company, they are doing their grandfather proud. I would highly recommend Twintech over any other hvac company out there.
See What Our Customers Are Saying:
Feb 18, 2025
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
Feb 18, 2025
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
Feb 18, 2025
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Feb 18, 2025
Amazing experience with TwinTech Heating & Cooling! Their team was professional, knowledgeable, and efficient from start to finish. They installed my new furnace quickly and left everything spotless. The technicians took the time to explain everything and made sure I was comfortable with the system before they left. Great customer service and fair pricing. I highly recommend them for anyone needing HVAC services!
Feb 18, 2025
Great experience all around. Bob was sharp and easy to talk to, and Greg handled the installation perfectly. Would hire them again in a heartbeat.
Amana Heat Pump Service Pickering
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - July 14, 2025
If you're a homeowner in Pickering looking to enhance energy efficiency and indoor comfort, installing an Amana heat pump could be the perfect solution. Renowned for their durability, energy savings, and year-round performance, Amana heat pump
Read MoreWhy Should I Have My AC Unit Inspected?
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - September 1, 2024
Having your AC unit inspected regularly is essential for several reasons: Improved Efficiency: Regular inspections ensure that your AC unit is running at peak efficiency. This not only helps in maintaining a comfortable indoor temperature bu
Read MoreProtect and Clean Your Air Conditioner
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - June 17, 2021
Your air conditioner unit provides you comfort especially during the warmer months. It is important that you know how to properly maintain and clean it so your comfort – as well as your family’s – will not be compromised. An air conditioner’s
Read MoreSpring Cleaning Tips You Should Know About
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - April 27, 2022
Spring is only a few days away and what better way to commemorate its arrival than by cleaning! Nothing says a fresh start faster than a thoroughly cleaned home. Being prepared is key in accomplishing this seemingly daunting task with ease. Make sure
Read More