$49 / month O.A.C Including Install
$49 / month O.A.C Including Install

5 Things You Should Know When Installing an Air Conditioner

24 / 7 Emergency Service Available. Call Us Now: 1.844.894.6832


[BACK]
5 Things You Should Know When Installing an Air Conditioner

Posted On: June 23, 2022

5 Things You Should Know When Installing an Air Conditioner

With the heat of the summer approaching, you may be looking to buy a new Central air conditioner.


Here are some tips to help you get the job done right! Today’s residential air conditioning systems are not as simple to install as they may appear.


Merely connecting all the tubing and wiring is just the beginning.


Beyond that, there are several important steps in the installation that can either make it or break it for you!


Here are 5 very important things that need to be done properly for your new air conditioner to last a long time.


This is how we do it day in and day out.


Number 1 - The installation of the evaporator coil (usually above your furnace) is a crucial part of a good install.


It must be installed in a way that directs all the air flowing out of your furnace, through the new matching evaporator coil.


This ensures that no air is flowing around it.


Also, the air leaks in the sheet metal work should be sealed with tape or sealant made for this purpose.


In the field, we often see an installation where the coil is mounted so that much of the air is flowing around the coil, which was never right to begin with.


We use 26 Gage Galvanized Metal Angle for this purpose because we come prepared to do it right.


Number 2 - The airspeed needs to be set at approximately 350 to 400 CFM per ton for air conditioning to work as it was designed to.


This is a very important step that is needed later when testing the level of “charge in your new system.


" Also, be sure to know the type of restrictor device your system has.


Is it a piston-type or a TXV (THERMOSTATIC EXPANSION VALVE)? It is not unusual, on a service call, to see that an installer has left the furnace fan speed set in the factory position, which is usually too high and a good indication that the charge was never checked when the AC was installed.


There can be a more negative effect on piston-type systems if the airflow is too high or low.


Systems equipped with a TXV also need to have the “bulb” installed in the correct location and orientation.


So many times, when removing someone’s old system we see the bulb still sitting in the shipping location, which means it was never working right from day one.


Number 3 - With today’s systems running on R410a refrigerant, it is more important than ever to have inert gas such as NITROGEN flowing through the copper tubing.


This is used to move the refrigerant from the outside unit (condenser) through the inside unit (evaporator).


The reason for this is that oxides can occur from the brazing process, and they contaminate the new system before it even starts.


This result can result in poor performance and a short life span of your new air conditioner.


Number 4 - It is important to test your new system for leaks before starting it up for the first time.


This is a two-part process that we follow on every installation.


The first step in this process is to pressure test all the welded joints, and since we are using NITROGEN for brazing, we just leave it connected to your new system.


Then, we pressurize the evaporator and new copper line welds up to 200 PSI for a few minutes.


If there is a leak, it will show on the gauge, and you may even be able to hear it if it's big enough.


It's not uncommon to have a small leak at this time because sometimes the position of the joint is difficult to access.


So by using NITROGEN as a first step, the system can be pre-approved as leak-free.


Number 5 - The final step we take, for all new installations or on any repair calls, is to use a Micron gauge to prove that the new system is 100 percent leak-free.


We pull our vacuums down to 250 microns using a properly calibrated digital gauge.


You cannot pull a deep vacuum, such as this, with any kind of small leak or non-condensable in the lines.


Once we establish the deep vacuum, then and only then, do we release the refrigerant from the new AC condenser that comes with a factory charge, which is usually sufficient for installations.


The final part of the start-up process is to measure the charge to ensure it is within the manufacturers' specifications.


We use digital gauges, which measure all the important things needed to be certain the system is right on the money, such as using a superheat calculation for piston-type systems and sub-cooling for systems equipped with a TXV.


We usually end up either having to add a bit of refrigerant to the system or remove a bit of refrigerant depending on the length of the tubing or other variables to dial in the charge just right.


Sometimes it takes an extra bit of time but now you are ready to enjoy many years of trouble-free air conditioning to keep your home comfortable through the hottest days of the season.



[BACK]

See What Our Customers Are Saying:

by peter in Whitby on Twintech Heating and Cooling

Very impressed with this company. They show up on time , kept my place clean and after they left it looks like they were never there. Very professional team. Those people know what they doing . Their installation was on the highest standard. They are very knowledgeable especially they're worker Peter. I strongly recommend this company to everybody. After the installation I receive the call making sure I'm satisfied with their products and their job. Bravo!!!

by James in Bowmanville on Twintech Heating and Cooling

Greg and his brother were referred to us by a friend. They arrived when they said they would, did an exceptional job and left the place as tidy or tidier then they found it. Their professionalism is only surpassed by their kind and friendly demeanor. Even after several calls to help me with my high tech thermostat I feel that I could always call with any concern (No one responds to my texts as quickly as Greg) and have a friendly helpful response. I found out their grandfather started the company and now as a 3rd generation company, they are doing their grandfather proud. I would highly recommend Twintech over any other hvac company out there.

by RJW in Ajax on Twintech Heating and Cooling

Thanks to the guys at Twintech Heating for a great job installing a new hot water tank. They set a time and day to remove the old tank and install the new one. They were on time and had the work done quickly and cleaned up after they were finished. Excellent work and great value.

by Marilyn in Milton on Twintech Heating and Cooling

In November, we contacted Twintech for a quote on a high efficiency furnace plus installation. Dave, the sales representative for the company was very friendly and informative. Upon arrival at our home, he willingly showed us his company licenses, clearly explained the operation of a high efficiency furnace and answered all our questions to our satisfaction. As well, Dave was the only sales representative that we contacted that was willing to make the arrangements for an energy audit. For us, this was a big plus as we found the government rebate program somewhat confusing to navigate. The furnace was installed on the date that was arranged in an efficient and professional manner by Greg (the owner) and Peter. Both men worked diligently, throughout a long day to complete the job and upon finishing, left the job site immaculate. When a neighbour raised concerns about the furnace venting location, Greg located an alternative location and resolved the situation with diplomacy. We chose the Napoleon furnace for its excellent warrant;y on the heat exchanger and because it was made in Canada! In addition, to the furnace warranty, Twintech offered us a 5 year warranty on labour which speaks to the quality and pride this team has in their workmanship. It has been over a month now (with some of the coldest January days on record) since we have had the furnace installed. The furnace runs quietly and distributes heat more evenly throughout our 90 year old Toronto home. We can't speak highly enough of the Twintech team and are very satisfied with their workmanship and job ethics. We have no hesitation about recommending them.

by Barry in Toronto on Twintech Heating and Cooling

What more could you ask for! Grant and Greg Dainty provided a professional,diligent and thorough approach to the installation of my furnace. I would highly recommend there services.

by Hector in Scarborough on Twintech Heating and Cooling

Last week our Furnace failed overnight. We called Twintech to help us get it running again. They did a really thorough check on it, and got it running in less than an hour. Given that it was an old Furnace (+20 years old), we were giving two options: repair it or replace it. Instead of doing a repair on it that could break in a week or two, they recommended us to change it. I like that they were honest on the recommendation, not forcing a new furnace on us. At the end we went with a new Furnace. Twintech solutions service & salesman gave us recommendation on the size of the unit and many options that could work for our home. They ended up doing an excellent work in our furnace, replacing the filter to a better option and replacing some pieces that had water damage. They cleaned after themselves and leave everything even better than what they found. They even went far and beyond tiding up the hose connections that we had on the basement.

by Ryan Doherty in Whitby on Twintech Heating and Cooling

I am in the process of finishing my basement and wanted to make sure I got the low hanging duct work fixed in advance. After reviewing 5 quotes I selected Twintech to award the contract to. The price was competitive however what won me over was Grant's (co-owner) attention to detail and his ability to focus on what my goals and priorities were for the project. His team completed the job over 3 days as there was significant duct work changes and the relocation of all of the equipment. They also completed the job with little downtime so we weren't left overnight without heat during freezing winter temperatures.

by Private User from Oshawa on Twintech Heating and Cooling

My father woke up to no heat one Saturday morning. We had a few names that friends had recommended but while checking out the companies' ratings on HomeStars, we found Twintech with great ratings too. The other companies either didn't get back to us or didn't have time to come at such short notice. TwinTech made the time in their schedule for what they judged to be an emergency: no heat in the home of an elderly person. At no extra fee for a short notice, weekend visit. They recommended an upgraded furnace unit and explained that we would qualify for a rebate that would bring the price down to that of a lower model. They set us up with the rep from the MNR that covers the rebate so that we didn't have to deal with the paperwork & phone calls ourselves. Installation was quick, efficient, & smooth. We were so pleased with their service we ordered a new water heater too. Both are working great (efficient & quiet!) & my father is safe & comfortable. We can't say enough about how pleased we are with their service. We have already recommended them to others.

by joe calabro in Pickering on Twintech Heating and Cooling

Twintech Heating & Cooling. I just want to say thanks for helping me . My Furnace stopped working. And l phone Dave Getgley he set me up with Greg. What an amazing team they did a great job in setting me up with a new Furnace. Anyone that needed a new Furnace these are the guys to call. Thanks again for a job well done.

by Peter from Ajax on Twintech Heating and Cooling

Our home has had poor heating and air conditioning the past couple of years. Dave recommended a Goodman solution with more power than we had. Grant and Greg installed the units in late November. Heating is better than ever. We have a warm home again and look forward to the winter. Can't wait to see how the AC runs in 2018. Job was super clean and professionally done. Highly recommended.

Related Links:
ac repair services, furnace repairs pickering, central air conditioner services, whitby air and heating, whitby heating and air, ajax hvac repair, air conditioner repair, hvac repairs, heating repair company, house air conditioner repair, ac repair and service, whitby air conditioning, residential air conditioner repair, residential ac repair, pickering air conditioners, oshawa air conditioners, nearby ac repair, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace repairs, furnace repair, hvac repair service, central air conditioner, ajax furnace repair, ajax air conditioners,


See What Our Customers Are Saying:

by Aaron on Twintech Heating and Cooling

We are very happy to recommend this company to everyone. Our furnace broke down on Sunday morning. We phoned them and before noon Grant the owner showed up. He worked on the furnace for about a hour not wanting to give up to fix the problem. The furnace was 17 years old. I was the one talking about replacing it. End result was the next day it was all done. On the Sunday Bob came over with heaters to warm up the house. We decided to replace the water heater at the same time. Thanks Grant for the excellent work. Thumbs up.

by Linda on Twintech Heating and Cooling

Right on time. Explained how to work the HRV in a different way so the house would not be so dry. Changed my whole house water filter for me as well. Friendly, helpful, caring service!

by Robert Rogers on Twintech Heating and Cooling

Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.

by Robert Mizuno on Twintech Heating and Cooling

We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!

by Ruth on Twintech Heating and Cooling

TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!

Why Does My Furnace Smell?

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - October 31, 2024

If your furnace has an unusual smell, it could be caused by a variety of issues. Here’s a breakdown of common furnace smells and what they might mean: 1. Burning Dust Smell Cause: If the furnace hasn’t been used for a while (like

Read More

Amana Heat Pump Service Pickering

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - July 14, 2025

If you're a homeowner in Pickering looking to enhance energy efficiency and indoor comfort, installing an Amana heat pump could be the perfect solution. Renowned for their durability, energy savings, and year-round performance, Amana heat pump

Read More

Amana Heat Pump Rebates Whitby

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - July 7, 2025

If you're a homeowner in the Durham Region looking to improve your home's energy efficiency and reduce heating and cooling costs, installing a heat pump is one of the smartest upgrades you can make. At Twintech Heating & Cooling, we sp

Read More

Why Isnt My AC Unit Turning On?

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - May 17, 2024

If your AC unit isn't turning on, there could be several reasons, ranging from simple issues that you can fix yourself to more complex problems requiring a professional technician. Here are some common causes and potential solutions: Basic Che

Read More