$49 / month O.A.C Including Install
$49 / month O.A.C Including Install

5 Things You Should Know When Installing an Air Conditioner

24 / 7 Emergency Service Available. Call Us Now: 1.844.894.6832


[BACK]
5 Things You Should Know When Installing an Air Conditioner

Posted On: June 23, 2022

5 Things You Should Know When Installing an Air Conditioner

With the heat of the summer approaching, you may be looking to buy a new Central air conditioner.


Here are some tips to help you get the job done right! Today’s residential air conditioning systems are not as simple to install as they may appear.


Merely connecting all the tubing and wiring is just the beginning.


Beyond that, there are several important steps in the installation that can either make it or break it for you!


Here are 5 very important things that need to be done properly for your new air conditioner to last a long time.


This is how we do it day in and day out.


Number 1 - The installation of the evaporator coil (usually above your furnace) is a crucial part of a good install.


It must be installed in a way that directs all the air flowing out of your furnace, through the new matching evaporator coil.


This ensures that no air is flowing around it.


Also, the air leaks in the sheet metal work should be sealed with tape or sealant made for this purpose.


In the field, we often see an installation where the coil is mounted so that much of the air is flowing around the coil, which was never right to begin with.


We use 26 Gage Galvanized Metal Angle for this purpose because we come prepared to do it right.


Number 2 - The airspeed needs to be set at approximately 350 to 400 CFM per ton for air conditioning to work as it was designed to.


This is a very important step that is needed later when testing the level of “charge in your new system.


" Also, be sure to know the type of restrictor device your system has.


Is it a piston-type or a TXV (THERMOSTATIC EXPANSION VALVE)? It is not unusual, on a service call, to see that an installer has left the furnace fan speed set in the factory position, which is usually too high and a good indication that the charge was never checked when the AC was installed.


There can be a more negative effect on piston-type systems if the airflow is too high or low.


Systems equipped with a TXV also need to have the “bulb” installed in the correct location and orientation.


So many times, when removing someone’s old system we see the bulb still sitting in the shipping location, which means it was never working right from day one.


Number 3 - With today’s systems running on R410a refrigerant, it is more important than ever to have inert gas such as NITROGEN flowing through the copper tubing.


This is used to move the refrigerant from the outside unit (condenser) through the inside unit (evaporator).


The reason for this is that oxides can occur from the brazing process, and they contaminate the new system before it even starts.


This result can result in poor performance and a short life span of your new air conditioner.


Number 4 - It is important to test your new system for leaks before starting it up for the first time.


This is a two-part process that we follow on every installation.


The first step in this process is to pressure test all the welded joints, and since we are using NITROGEN for brazing, we just leave it connected to your new system.


Then, we pressurize the evaporator and new copper line welds up to 200 PSI for a few minutes.


If there is a leak, it will show on the gauge, and you may even be able to hear it if it's big enough.


It's not uncommon to have a small leak at this time because sometimes the position of the joint is difficult to access.


So by using NITROGEN as a first step, the system can be pre-approved as leak-free.


Number 5 - The final step we take, for all new installations or on any repair calls, is to use a Micron gauge to prove that the new system is 100 percent leak-free.


We pull our vacuums down to 250 microns using a properly calibrated digital gauge.


You cannot pull a deep vacuum, such as this, with any kind of small leak or non-condensable in the lines.


Once we establish the deep vacuum, then and only then, do we release the refrigerant from the new AC condenser that comes with a factory charge, which is usually sufficient for installations.


The final part of the start-up process is to measure the charge to ensure it is within the manufacturers' specifications.


We use digital gauges, which measure all the important things needed to be certain the system is right on the money, such as using a superheat calculation for piston-type systems and sub-cooling for systems equipped with a TXV.


We usually end up either having to add a bit of refrigerant to the system or remove a bit of refrigerant depending on the length of the tubing or other variables to dial in the charge just right.


Sometimes it takes an extra bit of time but now you are ready to enjoy many years of trouble-free air conditioning to keep your home comfortable through the hottest days of the season.



[BACK]

See What Our Customers Are Saying:

by Private User from Private User on Twintech Heating and Cooling

I have used Twintech many times over the years. They always arrive quickly and get the issue fixed. The most recent incident was when my air conditioner broke last week I called Greg at 11:30am and he was at my home by 2:30pm he had the unit fixed by 3:30pm. Twintech are very reliable and honest and they are experts in the field. I have already recommended them to many of my friends. I would not use anyone but them for my heating and air conditioning issues.

by Kate A in Pickering on Twintech Heating and Cooling

I would highly recommend these guys, professional, fast and competitive pricing. I moved into this place with no working AC unit with a 8 month baby, he was able to come with in a week to fix even in the busy summer days. He really values his customers , I am already recommending to my neighbors.

by Private User in Whitby on Twintech Heating and Cooling

Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!

by Private User from Bowmanville on Twintech Heating and Cooling

Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.

by astephenson in Oshawa on Twintech Heating and Cooling

Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.

by rcnichols electric in Whitby on Twintech Heating and Cooling

We had Grant and Greg Dainty quote to replace our 20 yr old furnace. I have known them for years and have had other jobs done by them ( AC and Pool Htr). The price was very reasonable and the job was completed in one day.

by Rick. F. in Pickering on Twintech Heating and Cooling

TwinTech was the right choice. Our consultation with Dave set the tone. Professional and knowledgeable, we even received a follow-up call within hours of our install completion, wow! TwinTech arrived as scheduled to install our A/C unit. Within minutes of arrival Greg noted and explained a few out of code faults on our furnace installed by another company, problems fixed, thanks TwinTech. Greg, Grant and "Subaru" Pete were meticulous start to finish. Highly recommended!

by Taresh, Pickering on Twintech Heating and Cooling

Twintech replaced our aging +20 yrs old Furnace & AC with the variable high efficiency Napoleon Furnace matched with the Goodman AC. Sales guy ,Dave was great, gave a no pressure estimate, explained about the Government Rebate program which they took care of completely including arranging the home energy audit. On the scheduled day Greg and his team arrived on time, did a great job and completed the same day , extremely professional and courteous, cleaned up everything , tested the system, Greg took his time to explain the setup. Very impressed with the Napoleon Furnace 9600 which did a great job in maintaining a comfortable temperature last winter and now with the hot weather the Goodman AC cooled the house in much less time than the old AC unit could ever. From start to finish Twintech were great and have no hesitation in recommending them 100%.

by Private User Pickering, ON on Twintech Heating and Cooling

The Twintech team did an excellent job installing our new Goodman air conditioner. They were polite and professional. Greg was knowledgeable and clearly experienced. Thank you Twintech for bringing our cooling system up to current regulations. Job well done!

by Y. M. from Pickering on Twintech Heating and Cooling

Dave from TwinTech was very knowledgeable, professional and thorough in the buying process. He helped us to identify the best furnace for our home and our budget. When we needed a new filter a year later and seemed to have a problem finding the right one, I called Dave up and he delivered a filter to me the next day! The cost was on par with other retailers, but it was this unexpected personal service that really was impressive. The furnace? Works like a charm.

Related Links:
ac repair services, furnace repairs pickering, central air conditioner services, whitby air and heating, whitby heating and air, ajax hvac repair, air conditioner repair, hvac repairs, heating repair company, house air conditioner repair, ac repair and service, whitby air conditioning, residential air conditioner repair, residential ac repair, pickering air conditioners, oshawa air conditioners, nearby ac repair, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace repairs, furnace repair, hvac repair service, central air conditioner, ajax furnace repair, ajax air conditioners,


See What Our Customers Are Saying:

by Aaron on Twintech Heating and Cooling

We are very happy to recommend this company to everyone. Our furnace broke down on Sunday morning. We phoned them and before noon Grant the owner showed up. He worked on the furnace for about a hour not wanting to give up to fix the problem. The furnace was 17 years old. I was the one talking about replacing it. End result was the next day it was all done. On the Sunday Bob came over with heaters to warm up the house. We decided to replace the water heater at the same time. Thanks Grant for the excellent work. Thumbs up.

by Linda on Twintech Heating and Cooling

Right on time. Explained how to work the HRV in a different way so the house would not be so dry. Changed my whole house water filter for me as well. Friendly, helpful, caring service!

by Robert Rogers on Twintech Heating and Cooling

Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.

by Robert Mizuno on Twintech Heating and Cooling

We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!

by Ruth on Twintech Heating and Cooling

TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!

Air Conditioner is Not Turning On

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - April 7, 2024

If your air conditioner is not turning on, there could be several reasons for this issue. Here are some steps you can take to troubleshoot the problem: If your air conditioner is not turning on, there could be several reasons for this issue. He

Read More

Ajax Furnace Leaking

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - January 19, 2025

If you’ve discovered water pooling around your furnace in Ajax, it’s a clear sign something isn’t right. Furnace leaks can cause water damage, reduce heating efficiency, and disrupt your home’s comfort. At Twintech Heating and

Read More

why should I switch to heat pump?

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - August 2, 2023

Switching to a heat pump can offer several benefits, depending on your specific circumstances and needs. Heat pumps are a type of HVAC (Heating, Ventilation, and Air Conditioning) system that can both heat and cool your living space. Here are s

Read More

Increasing the Life Expectancy of Your Air Conditioner

  • SUBMITTED BY:
  • TWINTECH HEATING & COOLING
  • - June 29, 2024

Increasing the life expectancy of your air conditioner involves regular maintenance and some practical habits. Here are some tips to help ensure your AC runs efficiently and lasts longer: Regular Maintenance Annual Professional Check-Up: Sch

Read More