Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
5 Things You Should Know When Installing an Air Conditioner
Posted On: June 23, 2022
With the heat of the summer approaching, you may be looking to buy a new Central air conditioner.
Here are some tips to help you get the job done right! Today’s residential air conditioning systems are not as simple to install as they may appear.
Merely connecting all the tubing and wiring is just the beginning.
Beyond that, there are several important steps in the installation that can either make it or break it for you!
Here are 5 very important things that need to be done properly for your new air conditioner to last a long time.
This is how we do it day in and day out.
Number 1 - The installation of the evaporator coil (usually above your furnace) is a crucial part of a good install.
It must be installed in a way that directs all the air flowing out of your furnace, through the new matching evaporator coil.
This ensures that no air is flowing around it.
Also, the air leaks in the sheet metal work should be sealed with tape or sealant made for this purpose.
In the field, we often see an installation where the coil is mounted so that much of the air is flowing around the coil, which was never right to begin with.
We use 26 Gage Galvanized Metal Angle for this purpose because we come prepared to do it right.
Number 2 - The airspeed needs to be set at approximately 350 to 400 CFM per ton for air conditioning to work as it was designed to.
This is a very important step that is needed later when testing the level of “charge in your new system.
" Also, be sure to know the type of restrictor device your system has.
Is it a piston-type or a TXV (THERMOSTATIC EXPANSION VALVE)? It is not unusual, on a service call, to see that an installer has left the furnace fan speed set in the factory position, which is usually too high and a good indication that the charge was never checked when the AC was installed.
There can be a more negative effect on piston-type systems if the airflow is too high or low.
Systems equipped with a TXV also need to have the “bulb” installed in the correct location and orientation.
So many times, when removing someone’s old system we see the bulb still sitting in the shipping location, which means it was never working right from day one.
Number 3 - With today’s systems running on R410a refrigerant, it is more important than ever to have inert gas such as NITROGEN flowing through the copper tubing.
This is used to move the refrigerant from the outside unit (condenser) through the inside unit (evaporator).
The reason for this is that oxides can occur from the brazing process, and they contaminate the new system before it even starts.
This result can result in poor performance and a short life span of your new air conditioner.
Number 4 - It is important to test your new system for leaks before starting it up for the first time.
This is a two-part process that we follow on every installation.
The first step in this process is to pressure test all the welded joints, and since we are using NITROGEN for brazing, we just leave it connected to your new system.
Then, we pressurize the evaporator and new copper line welds up to 200 PSI for a few minutes.
If there is a leak, it will show on the gauge, and you may even be able to hear it if it's big enough.
It's not uncommon to have a small leak at this time because sometimes the position of the joint is difficult to access.
So by using NITROGEN as a first step, the system can be pre-approved as leak-free.
Number 5 - The final step we take, for all new installations or on any repair calls, is to use a Micron gauge to prove that the new system is 100 percent leak-free.
We pull our vacuums down to 250 microns using a properly calibrated digital gauge.
You cannot pull a deep vacuum, such as this, with any kind of small leak or non-condensable in the lines.
Once we establish the deep vacuum, then and only then, do we release the refrigerant from the new AC condenser that comes with a factory charge, which is usually sufficient for installations.
The final part of the start-up process is to measure the charge to ensure it is within the manufacturers' specifications.
We use digital gauges, which measure all the important things needed to be certain the system is right on the money, such as using a superheat calculation for piston-type systems and sub-cooling for systems equipped with a TXV.
We usually end up either having to add a bit of refrigerant to the system or remove a bit of refrigerant depending on the length of the tubing or other variables to dial in the charge just right.
Sometimes it takes an extra bit of time but now you are ready to enjoy many years of trouble-free air conditioning to keep your home comfortable through the hottest days of the season.
[BACK]
See What Our Customers Are Saying:
Jan 4, 2023
We have been shopping for a heat pump for our home. We had 3 reps come in and make recommendations and provide a quote. Of the 3, Bob was so clearly so much more qualified, thorough and informed than the other two that the decision was a no brainer. As soon as we get our audit results Twintech will be installing our heat pump.
Jan 4, 2023
knowledgeable sales person, did not try to up-sell unneeded features,
and was easily contacted to ensure customer satisfaction.
Installation was expertly done by friendly guys, everything explained for use of the products. Old products were removed and returned to rental company as part of the service. Follow up call was received to check all was well. This is my second time using this company as I was fully satisfied with my previous air conditioning unit installation
Jan 4, 2023
Twintech recently installed a new furnace for me. Bob did a great job assessing what I had and needed. All details well explained including the importance of proper sizing of furnace and the value of multi stage heating and the variable speed blower. As a nurse, indoor air quality is a high priority so the variable speed motor running continuous is so good. 24/7 air cleaning. Greg did a great job on install, attention to detail so appreciated. Already notice such an improved comfort and heat. Thank you Twintech! You come as advertised. I will recommend to anyone in need of heating or cooling!
Jan 4, 2023
We received various quotes from 4 different companies and right away, the prompt and thorough communication from Bob from TwinTech stood out. He introduced himself, sent sample sites and information, and always confirmed any agreed to dates and times.
Bob was friendly and extremely knowledgeable about the topic of HVAC and it was clear he was passionate about his profession. He approached the job as if he was installing in his own home.
Prior to the new furnace & A/C installation, our old units were loud and inefficient - having several rooms feeling too cold in the winter and too hot in the summer. After installing the recommended units, all rooms stay at a consistent temperature- even the finished basement.
I highly recommend the TwinTech team - just an outstanding job at a reasonable price point.
Jan 4, 2023
The experience with Twintech was great from the start. Bob the sales manager was friendly and professional and did not use any pressure tactics. He was very knowledgeable.
The installation was completed by the twin owners in about 6-7 hours. Clean quiet easy going didn't mind when I poked my head in to see progress. Highly recommend
Sep 8, 2022
Just choose Twintech!
I do not usually write reviews and should have done this a few days sooner. But I was and still am enjoying the increased comfort in my home from the new furnace installed by Twintech.
From my initial call and conversation with Bob, I already had a good feeling that I would like this company.
I was provided information, pictures of great quality work previously completed.
When Bob came for the inspection of the furnace he was amazing. He gave so much great advice and told me all the areas that his team would resolve. I was very impressed as some of what he had suggested I had only seen in Youtube videos. The honesty and options for payment made this a no brainer. I decided I would like Twintech to replace my furnace.
The work was scheduled promptly week and took place within half a day. Gregg came to install the new furnace. Again amazing they carried out all the work promised. What was left was the best I have seen and speaks to how they take pride in the work they do and deliver. Gregg was really polite and professional and the furnace in my basement is a work of art.
Sep 7, 2022
They were friendly, fast, clean, & answered any questions I had. They are also offering an interest free 12 month payment plan - that really helped me out since this was an unexpected expense.
Sep 6, 2022
I had Twintech heating install a new furnace and ac unit. Bob, the sales rep, the installation team of Greg and Mitch were a 10 across the board. They were never pushy, gave me time to think about it. Once we decided , they were there in 24hrs. Great company to deal with. And they were nearly 5k less than a competitors quote for a top of the line furnace/ac unit verse mid level.
I highly recommend Twintech heating to anyone interested in anything HVAC.
Sep 5, 2022
Our hot water tank died and with an after hours phone called Bob the sales guy jumped into action. Friendly, courteous and genuinely wanted to do whats best for our house hold we were given options and he awaited an answer with no pressure.
We decided on what we wanted and it was installed asap and Greg and team worked and cleaned up so well, you would never know there was a hot water tank there before!
We love our hot water tank and being able to have back to back to back showers without having to wait for the hot water tank to heat the water!
Sep 4, 2022
I had heard of Twin Tech from a good friend of mine.
I needed to get a new Air Conditioner. It was not working properly and was 19 years old. I decided to get a new furnace at the same time.
I gave them a call on Saturday June 28.
I spoke to Bob Graham. I made arrangements for him to attend my house the following day.
I saw him on Sunday June 29 at 1100 AM.
He was on time and looked professional.
He spent 2 hours with me going over what I needed. He also suggested that I purchase a Humidifier. He gave me a quote of just under $11,000.00 for the purchase and installation of a Air Conditioner, Furnace and Humidifier. He was not pushy and gave me time to speak to my wife.
I called Bob on Monday June 30 and made arrangements to have it installed by the end of the week.
On Friday June 3 they arrived at 830 AM.
Again, right on time.
Greg and Mitch worked all day and finished the installation by 430 PM.
They made sure that everything was working properly and the basement was just as clean as it was before they came.
I will now be using Twin Tech to perform any maintenance needed on this equipment.
I was completely satisfied from start to finish with the service provided.
Thank You,
Gary Grieves.
Upchurch Ave.
Ajax.
Related Links:
ac repair services, furnace repairs pickering, central air conditioner services, whitby air and heating, whitby heating and air, ajax hvac repair, air conditioner repair, hvac repairs, heating repair company, house air conditioner repair, ac repair and service, whitby air conditioning, residential air conditioner repair, residential ac repair, pickering air conditioners, oshawa air conditioners, nearby ac repair, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace repairs, furnace repair, hvac repair service, central air conditioner, ajax furnace repair, ajax air conditioners,