Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
What is the Difference Between Single-Stage, Two-Stage, and Modulating Furnaces?
Posted On: January 8, 2020
When you are looking around for a new furnace, you will come across three different types: single-stage, two-stage and modulating. You may probably ask, what are the differences between them, and which one is right for your home?
In this article, we will explain the differences between them and help you decide which furnace works best for you and your family.
Single-Stage Furnaces
Single-stage furnaces only have one setting, which is high heat. On a call for heat, they immediately start running at full capacity, no matter what the temperature is outside until the signal coming from the thermostat is turned off. These types of furnaces are best suited for budget-conscious consumers, so in the long run, the upfront cost savings are not realized.
Two-Stage Furnaces
A two-stage gas furnace has two settings, high fire and low fire, and here is how it works. Most of the time, on a typical heating cycle the furnace will start out running on low fire, consuming less gas and electricity, while at the same time providing heat and gaining inefficiency. After approximately 7- 10 minutes of operation, the furnace begins to operate very efficiently because it is fully warmed up. Then, it will jump up into high fire and finish out the heating cycle at full capacity. Control of the high and low burner timing are made by the installers, as part of a new furnace installation.
You could also control the 2 stage burner by using a 2 stage thermostat, the effect of either is similar. Two-stage furnaces are considered more energy-efficient than single-stage because they are not always running at a full heating capacity of the appliance and are often equipped with an ECM blower motor which will also save on your electricity costs.
Modulating Furnaces
Modulating gas furnaces are at the top end of the gas furnace spectrum and are considered to be the most energy-efficient of the three. But, at an added price over two-stage or single-stage furnaces. Heating from a modulating furnace ramps up in increments to maintain a consistent temperature and the ductwork is always warmed up so there is a little efficiency lost during the warming up process.
When buying a modulating furnace you will almost always need to invest in a new thermostat controller specifically designed for this type of furnace in order to get the most out of it. Always ask your salesman about this option, as it is often not mentioned (due to the added cost of the new thermostat). If you are planning to stay in your home for the long-term, a modulating gas furnace may be the right fit for you.
When you want to buy a new furnace, you should always consult your local HVAC experts before making a decision. A trained HVAC technician can come to your home, go over your situation with you and help you decide which furnace best suits your home.
When you are ready for a new furnace, contact the Twintech experts! Our technicians are experienced and knowledgeable in all types of furnaces and HVAC systems.
For more information about our services, visit our website or give us a call at 1-844-894-6832. Contact Twintech today!
[BACK]
See What Our Customers Are Saying:
Jul 2, 2017
Very impressed they arrive to quote even though I had forgotten to call them back to confirm date & time. They showed the day before installation to deliver the unit. Returned the next day as promised at 9am. Project was completed in a professional manner. They even fixed a few things that they noticed were not installed correctly, or to code by previous heating & air contractors we had at our residence before. Would recommend this company to everyone!
Jun 29, 2017
Greg removed old oil furnace and oil tank from basement relocated new Napoleon propane furnace to allow duct work to be rerouted to a much more suitable location. Moved air conditioner to the new furnace. Dave recommended two available grants to assist with cost. They kept to their original quoted price which was substantially lower than a competitors for the same furnace and work. They completed the work as stated when stated and left the area clean and tidy. We are very pleased with the outcome.
Jun 28, 2017
Twintech installed a Goodman furnace and ac init. Very professional install, both units are working well.
Jun 28, 2017
We had Grant and Greg Dainty quote to replace our 20 yr old furnace. I have known them for years and have had other jobs done by them ( AC and Pool Htr). The price was very reasonable and the job was completed in one day.
Jun 23, 2017
TwinTech was the right choice. Our consultation with Dave set the tone. Professional and knowledgeable, we even received a follow-up call within hours of our install completion, wow! TwinTech arrived as scheduled to install our A/C unit. Within minutes of arrival Greg noted and explained a few out of code faults on our furnace installed by another company, problems fixed, thanks TwinTech. Greg, Grant and "Subaru" Pete were meticulous start to finish. Highly recommended!
Jun 13, 2017
Twintech replaced our aging +20 yrs old Furnace & AC with the variable high efficiency Napoleon Furnace matched with the Goodman AC. Sales guy ,Dave was great, gave a no pressure estimate, explained about the Government Rebate program which they took care of completely including arranging the home energy audit. On the scheduled day Greg and his team arrived on time, did a great job and completed the same day , extremely professional and courteous, cleaned up everything , tested the system, Greg took his time to explain the setup. Very impressed with the Napoleon Furnace 9600 which did a great job in maintaining a comfortable temperature last winter and now with the hot weather the Goodman AC cooled the house in much less time than the old AC unit could ever. From start to finish Twintech were great and have no hesitation in recommending them 100%.
Jun 13, 2017
The Twintech team did an excellent job installing our new Goodman air conditioner. They were polite and professional. Greg was knowledgeable and clearly experienced. Thank you Twintech for bringing our cooling system up to current regulations. Job well done!
Jun 11, 2017
Dave from TwinTech was very knowledgeable, professional and thorough in the buying process. He helped us to identify the best furnace for our home and our budget. When we needed a new filter a year later and seemed to have a problem finding the right one, I called Dave up and he delivered a filter to me the next day! The cost was on par with other retailers, but it was this unexpected personal service that really was impressive. The furnace? Works like a charm.
May 27, 2017
Imagine, it's 5 minutes after the midnight countdown New Year's eve and the furnace quits. We called TwinTech fully expecting to leave a message and actually spoke with Greg, one of the owners! We had an immediate repair early the next morning & a new furnace within the week. We have entrusted TwinTech with all our home HVAC service needs for over 6 years. That's why this week with an opportunity to purchase a new BBQ, we called them 1st to see about a gas line install. It's chicken on the grill tonight! They are efficient, reliable, honest, hard working, and -- attentive is an understatement.
Jan 19, 2016
Wonderful customer service, starting from the job quote (Dave), to the clean install, to the follow-up. Twintech is a small company which installed my Napoleon furnace, A/C, John Wood tank, and ran the line for my gas dryer. The installation was completed as promised in one day. The work area was kept very clean, and they even took care of my old rental tank. The professionalism and wonderful customer service is second to none. They completed all of my rebate paperwork, and now I'm getting $2000 back! You will not be disappointed if you hire this company for your project.
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,