Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
What Do These Furnace Error Codes Mean?
Posted On: September 21, 2024
Furnace error codes are diagnostic signals that help identify problems with the furnace's operation. Each code represents a specific issue that needs to be addressed, typically related to components like the thermostat, sensors, or burners. Here's a breakdown of some common furnace error codes:
1. Error Code 1 Flash:
- Issue: Furnace is in a lockout mode.
- Meaning: This typically happens after three failed ignition attempts. The furnace will shut down for safety reasons.
- Solution: Reset the furnace or call a technician to check the ignition system.
2. Error Code 2 Flashes:
- Issue: Pressure switch stuck closed.
- Meaning: The pressure switch monitors the venting system. If it’s stuck, it means the furnace might be having issues with the venting process.
- Solution: Check for blockages in the vent pipe or replace the pressure switch.
3. Error Code 3 Flashes:
- Issue: Pressure switch stuck open.
- Meaning: The switch is open when it should be closed during normal furnace operation.
- Solution: Ensure the vent pipes are clear, and the switch is functioning properly.
4. Error Code 4 Flashes:
- Issue: Limit switch open.
- Meaning: The limit switch is a safety device that shuts off the furnace if it overheats.
- Solution: Check for restricted airflow due to dirty filters or obstructed vents.
5. Error Code 5 Flashes:
- Issue: Flame sensor failure.
- Meaning: The furnace cannot detect a flame, which could indicate a dirty or faulty flame sensor.
- Solution: Clean the flame sensor or replace it if necessary.
6. Error Code 6 Flashes:
- Issue: Ignition lockout.
- Meaning: After three failed ignition attempts, the furnace will enter lockout mode.
- Solution: Check the gas supply and ignition system, and reset the furnace.
7. Error Code 7 Flashes:
- Issue: Gas valve stuck closed.
- Meaning: The furnace cannot get the gas needed for combustion.
- Solution: Inspect the gas valve and ensure it’s operating correctly.
8. Error Code 8 Flashes:
- Issue: Low voltage issue.
- Meaning: The furnace is not receiving adequate power to function properly.
- Solution: Check the electrical connections and wiring to the furnace.
Each brand of furnace may have different error codes, so it's important to refer to the furnace’s manual for specific meanings or call a professional HVAC technician if you're unsure about any particular code.
[BACK]
See What Our Customers Are Saying:
Apr 10, 2019
Had new furnace installed and ran into some difficulties but the contractor responded in a timely and efficient manner - after further service calls were made, a reasonable resolution was found.
Apr 8, 2019
The work was done quickly efficiently neatly and professionally. Pleased with the service, information, product, and the company.
Apr 1, 2019
Great sales member named Dave came in told us some amazing items and how they would be priced installed an all. We couldnt believe it! The next day the ac was installed, that day one employee named Greg told us that our furnace was working way to hard and was causing us to use way too much gas. So two days later they came in an installed a new furnace!
Apr 1, 2019
Installation was done quickly and professionally. The new furnace is quiet and provides even heat.
Mar 3, 2019
They removed and discarded old furnace. Installed new furnace. Installed air intake pipe, that had never been installed by builder, no charge. Replaced loose hose on floor with hard pipe and rerouted it to drain, no charge. Almost 33% cheaper then quote from Enercare, which was the company we dealt with and had insurance with for 8 years. No yearly fee for cleaning/insurance, saves 300 a year. Courteous, professional, fast, and friendly. My wife and I have been recommending them to everyone we know and meet, and will continue to do so. Thanks for everything, Twintech!!!
Mar 4, 2019
This company was great to deal with. Our furnace went down and they installed a new furnace the next day with a lot of professionalism!
Feb 22, 2019
Finally! An honest company with highly knowledgeable and informative staff. Had a furnace service and found multiply errors in our system from an amateur installer. Very fair price to correct problems and will definitely use again.
Feb 16, 2019
Had to replace the heating & a/c unit in a condo apartment dwelling. this company recommended by the property manager and president of the condo building. found their workmanship and attention to details very good and very thorough. were able to resolve small problems and situations and happy to feel the heat in my unit. it's pricey, but happy was done by a very professional service. thank you.
Feb 13, 2019
Fantastic team. Completed the job as per the specifications and in under 3 hours. Highly recommended Twintech.
Jan 30, 2019
During the summer, I previously hired TwinTech to replace my air conditioner when it failed. They did an excellent job so when I decided to proactively replace the furnace I contacted them. The furnace I had was 22 years old and showed signs of internal leakage. It still worked but rather than wait to have it fail in cold weather, I decided to purchase a higher efficiency model before it failed and take advantage of energy efficiency rebates. TwinTech offered very useful advice on the make and model of furnace to choose including high efficiency and variable speed motor. The price was reasonable, TwinTech arrived at the allotted time, installed the new furnace (including some re-routing of exhaust lines since the existing ones were too close to other vents), removed the old furnace, tested the installation and cleaned everything up. Overall, it was a good experience, they did a great job and the new furnace is working well.
Related Links:
oshawa gas furnace problems, ac service call, pickering hvac prices, local ac services, ajax furnace inspection, ac repair services, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, central ac service, ac unit maintenance, pickering gas furnace problems, ac installation near me, ajax hvac repair, hvac repairs, ac contractors, ac repair and service, whitby furnaces, residential furnace, residential ac repair, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, nearby ac repair,