Categories
- AC Filters
- AC Repair
- Air Conditioner Maintenance
- Air Conditioner Repair
- Air Conditioners
- Air Conditioning Services
- Air Quality
- Cleaning Tips
- Cooling
- Duct System
- Ducted Air Conditioner
- Ductless Air Conditioner
- Emergency Repairs
- Energy Costs
- Expert Help
- Fans
- FAQ
- Filters
- Fireplaces
- Fun
- Furnace Installations
- Furnace Repairs
- Furnaces
- Gas Fireplaces
- Gas Line
- Gas Line Installations
- Heat Pumps
- Heating
- Heating and Cooling
- Heating Contractors
- heating system
- Heating Technicians
- Humidity
- HVAC
- HVAC Contractors
- HVAC experts
- HVAC Noises
- HVAC professionals
- HVAC Repairs
- HVAC Service
- Insulation
- Maintenance
- Natural Gas
- Pestibulum molestieenean
- Saving Money
- Water
- Water Heaters
- Work
[BACK]
Furnace Ignition Failure
Posted On: September 22, 2024
Furnace ignition failure is a common issue that can prevent your heating system from working properly. There are several potential causes for this problem, and understanding them can help diagnose and resolve the issue efficiently. Here are some of the common reasons for furnace ignition failure:
1. Dirty or Faulty Igniter
The igniter is responsible for lighting the gas in your furnace. Over time, it can become dirty or wear out, preventing the furnace from igniting. Cleaning or replacing the igniter might be necessary.
2. Clogged Air Filter
A dirty air filter restricts airflow to the furnace, causing it to overheat and shut down. This can lead to ignition failure if the furnace overheats before ignition can take place.
3. Gas Supply Issues
If there's a problem with the gas supply, such as a closed valve, low pressure, or a malfunctioning gas line, the furnace won’t ignite. Ensuring that gas is flowing to the furnace is crucial.
4. Faulty Flame Sensor
The flame sensor detects whether the furnace's burner is lit. If it is dirty or defective, the sensor may shut down the furnace as a safety precaution, preventing ignition.
5. Malfunctioning Thermostat
If the thermostat is not communicating properly with the furnace, it might not signal the furnace to start the ignition process. Checking and recalibrating or replacing the thermostat can resolve this issue.
6. Tripped Circuit Breaker
A furnace requires power to ignite. If the circuit breaker has tripped, the furnace won’t receive the necessary power, leading to ignition failure.
7. Blocked Vents or Chimney
Blockages in the exhaust system, including the vents or chimney, can cause ignition issues because the furnace needs proper airflow for combustion. Clearing any obstructions can resolve this.
8. Pilot Light Issues (Older Furnaces)
In older furnace models with a pilot light, if the pilot goes out or is weak, the furnace won’t ignite. Reigniting the pilot or adjusting it might be necessary.
9. Control Board Problems
The control board is the furnace’s “brain,” managing various functions, including ignition. A malfunctioning control board may fail to initiate the ignition process.
Solutions for Ignition Failure:
- Check the air filter and replace if dirty.
- Ensure that the gas valve is open and the supply is normal.
- Clean the flame sensor and igniter if they are dirty.
- Reset the circuit breaker if it’s tripped.
- Inspect the thermostat to ensure it’s working correctly.
In most cases, if the issue persists, it’s best to contact a professional HVAC technician for repair. They will be able to diagnose and fix any deeper issues causing the furnace to fail ignition.
[BACK]
See What Our Customers Are Saying:
May 13, 2020
We are very happy with our new furnace. The service was excellent the guys worked 6 hours straight through and there was no mess at all they took the old furnace boxs etc with them they then explained everything to us they were very helpful and pleasant , when we need a new air conditioner we know who to call!
May 12, 2020
The crew from sales to installation was very professional and had great attention to detail
May 11, 2020
We couldnt have been more impressed with Twintech - from our first service call with Mitch who took the time to thoroughly diagnose the issue with our furnace, to Dave who proposed a well thought out solution to meet our needs and finally Greg and team who acted quickly to install given we had no heat.
We did our due diligence by soliciting quotes from alternate providers and were shocked and disappointed by the aggressive and manipulative tactics used.
Twintech was honest in their approach, detailed in their product knowledge, reasonably priced, diligent in their follow-up and valued our business.
Well done Twintech! You made this a positive experience for us and our new furnace works beautifully!
May 10, 2020
We recently purchased an Amana high efficiency furnace and humdifier through Twintech. The work was completed very professionally and the quality of the workmanship was high. There was some additional sheet metal work required to complete the installation, which they were able to complete themselves. Overall I am very pleased with the work and would highly recommend Twintech for a furnace replacement.
May 9, 2020
We were very pleased with every aspect of the work that was done. They were very professional and polite. They arrived when they said they would and job was completed on estimated time
We would highly recommend them to whoever needed a recommendation
We have a very large dog and they were very understanding and respectful of him being around
May 8, 2020
The blower on our furnace stopped working leaving us with a cold house. Dave from TwinTech responded immediately to our HomeStars service request. From beginning to end Dave was nothing but helpful, friendly and professional, he did a great job of walking us through the quote and scope of work.
The replacement of the furnace went smoothly. The Guys did a great job, everyone was very friendly and polite. There were no hiccups, or unexpected costs. The only surprise was they left the work area cleaner than it was before they started.
Was a great experience with the whole TwinTech team. Its been a couple of months since the new furnace has been installed and its working great!
May 7, 2020
I heard about TwinTech when researching new furnaces at furnaceprices.ca. After contacting them about my broken down furnace, Dave came to my house the next day to assess my situation and requirements for a new furnace. He recommended one that had stainless steel heat exchangers which sold me since my previous furnace had issues with a rusted secondary heat exchanger that had to be replaced. Dave also set me up with an appointment with an energy audit company so that I could take advantage of a rebate to help improve the energy efficiency of my home and get some money back. A few days later, Greg, Grant, and Mitch came to install the new furnace and remove the old one. When delivering and removing the furnaces, they were very careful not to damage my floors and walls, and even laid out red carpeting to protect the floors. They were very friendly and professional. The installation was completed in the time they said it would take and they cleaned up their work areas. Within a week, Dave called to follow-up to see how everything was going. I have already recommended them to several friends and family members who may need new furnaces soon.
May 6, 2020
Twintech did a great job, from Dave the Sales Rep to the Office staff and The Professional Technicians who did the installation. They were professional, courteous, knowledgable and informative. From beginning to follow up we were completely satisfied with everything. Thanks Again. Sincerely The Laytons
May 5, 2020
Great product, great service, great follow-up. The Twintech Heating and Cooling arranged removal of my existing oil tank and they installed the new gas furnace Amana (made in USA). I am very happy with the final result and support I received throughout the process. My thanks go to the entire Twintech team for their professionalism, great communication and follow-up.
May 4, 2020
We've had Twintech provide us with work in the past, for an inground pool heater and required rough-in for a new gas stove. More recently they provided the same friendly, professional, timely and clean installation of our new furnace.
Related Links:
oshawa gas furnace problems, ajax furnace inspection, whitby furnace replacement, furnace repairs pickering, oshawa hvac furnaces, pickering gas furnace problems, whitby furnaces, residential furnace, pickering hvac furnace, pickering furnace service, pickering furnaces, oshawa furnace inspection, oshawa furnaces, gas furnace problems, furnace services oshawa, furnace maintenance near me, furnace repair ajax, furnace repair pickering, furnace repair oshawa, furnace replacement, furnace repairs, furnace repair, furnace installations ajax, furnace installations pickering, furnace installations oshawa, furnace inspection,