Durham Region Air Conditioning Repair, Service and Installation
If you're looking for help fixing your coleman furnace, look no further! Our comprehensive coleman furnace repair guide will explain common issues, provide troubleshooting tips, and show you how to read your model's error codes.
CODE: Slow green flashing.
RESULT: Coleman furnace is operating normally.
FIX: N/A.
RESULT: Coleman furnace is operating normally.
FIX: N/A.
CODE: Slow amber flashing.
RESULT: Normal operation with a call for heat.
FIX: N/A.
RESULT: Normal operation with a call for heat.
FIX: N/A.
CODE: Steady on red.
RESULT: There's a control failure.
FIX: Check Control Unit.
RESULT: There's a control failure.
FIX: Check Control Unit.
CODE: Rapid red flashing.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.
RESULT: There's a twinning error with incorrect 24V phasing.
FIX: Check the twinning wiring.
CODE: Rapid amber flashing.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.
RESULT: There's a low flame sense current.
FIX: Check and clean the flame sensor. If it's still an issue, check for proper gas flow.
CODE: One red flash.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.
RESULT: A flame's present with the gas turned off.
FIX: Check the gas valve. It could be leaky or slow closing.
CODE: Two red flashes.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.
RESULT: Pressure switch is stuck in the closed position.
FIX: Check if there is a faulty pressure switch or miswiring.
CODE: Three red flashes.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.
RESULT: Pressure switch is stuck in the open position.
FIX: Check if there is a faulty inducer, a blocked vent pipe, a broken pressure switch hose, or a faulty pressure switch.
CODE: Four red flashes.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.
RESULT: Limit switch is stuck while open.
FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.
CODE: Five red flashes.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.
RESULT: Rollout switch is stuck while open.
FIX: The rollout control is manually reset. Therefore, if it has opened, then check to see if the inducer is operating properly or there is an issue with the primary heat exchanger.
CODE: Six red flashes.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.
RESULT: Pressure switch cycle has locked out.
FIX: The furnace will lockout for one hour and then reset.
CODE: Seven red flashes.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.
RESULT: There's an ignition lockout due to too many retries.
FIX: The flame couldn't be established, check for a faulty gas valve, a dirty or defective flame sensor, a faulty hot surface ignitor, or a problem with the burner.
CODE: Eight red flashes.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.
RESULT: There's an ignition lockout due to repeated power recycles.
FIX: Check if there is low gas pressure, a dirty or defective flame sensor, or a faulty gas valve.
CODE: Nine red flashes.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.
RESULT: There's a grounding or line polarity issue.
FIX: Check the polarity at both the furnace and branch.
CODE: Ten red flashes.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.
RESULT: Gas continues to flow with no call for heating.
FIX: Check on the gas valve and the gas valve wiring.
See What Our Customers Are Saying:
Apr 12, 2019
On one of the coldest days of winter, our furnace stopped working. Our regular furnace company came and told us we had a CO2 leak and shut us off. Their quote for a new furnace was way too high and they couldn't even install it on the same day. TwinTech was recommended to us by a friend. We called and spoke to Dave who was very nice and knowledgeable. Grant showed up a short time later and a new furnace was installed the same day with no troubles at all. Best of all, we received a higher-end furnace than what was offered by our previous company and at a cheaper price. I would recommend TwinTech with no hesitation at all.
Apr 11, 2019
I installed a new furnace and Air conditioner with them. The installation is of high quality and according to standards. The guys are professional and reasonably priced.. I highly recommend them.
Apr 10, 2019
Had new furnace installed and ran into some difficulties but the contractor responded in a timely and efficient manner - after further service calls were made, a reasonable resolution was found.
Apr 8, 2019
The work was done quickly efficiently neatly and professionally. Pleased with the service, information, product, and the company.
Apr 1, 2019
Great sales member named Dave came in told us some amazing items and how they would be priced installed an all. We couldnt believe it! The next day the ac was installed, that day one employee named Greg told us that our furnace was working way to hard and was causing us to use way too much gas. So two days later they came in an installed a new furnace!
Apr 1, 2019
Installation was done quickly and professionally. The new furnace is quiet and provides even heat.
Mar 3, 2019
They removed and discarded old furnace. Installed new furnace. Installed air intake pipe, that had never been installed by builder, no charge. Replaced loose hose on floor with hard pipe and rerouted it to drain, no charge. Almost 33% cheaper then quote from Enercare, which was the company we dealt with and had insurance with for 8 years. No yearly fee for cleaning/insurance, saves 300 a year. Courteous, professional, fast, and friendly. My wife and I have been recommending them to everyone we know and meet, and will continue to do so. Thanks for everything, Twintech!!!
Mar 4, 2019
This company was great to deal with. Our furnace went down and they installed a new furnace the next day with a lot of professionalism!
Feb 22, 2019
Finally! An honest company with highly knowledgeable and informative staff. Had a furnace service and found multiply errors in our system from an amateur installer. Very fair price to correct problems and will definitely use again.
Feb 16, 2019
Had to replace the heating & a/c unit in a condo apartment dwelling. this company recommended by the property manager and president of the condo building. found their workmanship and attention to details very good and very thorough. were able to resolve small problems and situations and happy to feel the heat in my unit. it's pricey, but happy was done by a very professional service. thank you.
See What Our Customers Are Saying:
Aug 8, 2025
We are very happy to recommend this company to everyone. Our furnace broke down on Sunday morning. We phoned them and before noon Grant the owner showed up. He worked on the furnace for about a hour not wanting to give up to fix the problem. The furnace was 17 years old. I was the one talking about replacing it. End result was the next day it was all done. On the Sunday Bob came over with heaters to warm up the house. We decided to replace the water heater at the same time. Thanks Grant for the excellent work. Thumbs up.
Aug 8, 2025
Right on time. Explained how to work the HRV in a different way so the house would not be so dry. Changed my whole house water filter for me as well. Friendly, helpful, caring service!
Feb 18, 2025
Very pleased with the professional service that TwinTech Heating and Cooling provided in replacing my furnace. I got several quotes from different service providers. Their price was excellent and they explained the features very well. We are very glad we went with TwinTech and highly recommend their services.
Feb 18, 2025
We were new homeowners in need of a second opinion. TwinTech Heating & Cooling were Amazing and professional. Very knowledgeable and great service all around. Recommend to anyone looking for honest and reliable services. Treated with respect and care. Thank you Greg, Mitch and Bob!
Feb 18, 2025
TwinTech is an excellent and honest company! I called them for a second opinion after being told by another company that I needed to replace my furnace. Turns out this was not the case at all! I did not need a new furnace. TwinTech did not push to make an unnecessary sale and saved me from a huge expense. Bob and Mitch were extremely professional and above all honest! I definitely recommend TwinTech!
Furnace Is Not Heating Up
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - October 24, 2024
If your furnace is not heating up, several potential issues could be causing the problem. Here are some common reasons and troubleshooting steps you can take: 1. Thermostat Issues Check settings: Ensure the thermostat is set to "heat&qu
Read MoreBenefits Gas Furances Have Over Electric
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - February 2, 2024
Gas furnaces offer several advantages over electric furnaces, including: Lower Operating Costs: In many regions, natural gas is cheaper than electricity, resulting in lower heating bills for homes equipped with gas furnaces. Faster H
Read MoreFurnace: Malfunctioning Thermostat?
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - December 5, 2024
If you're experiencing issues with your furnace, a malfunctioning thermostat might be the culprit. Here's how to identify the problem and address it: Signs of a Malfunctioning Thermostat Temperature Discrepancies: The room feels cold
Read MoreWhy Heat Pumps Are a Smarter Choice for Home Comfort
- SUBMITTED BY:
- TWINTECH HEATING & COOLING
- - May 13, 2025
When it comes to keeping your home comfortable year-round, choosing the right HVAC system can make a big difference. Among the many options available, heat pumps have become increasingly popular — and for good reason. Unlike traditional f
Read More